HP battery check

Similar Questions

• HP Battery Check: - Unknown state (94)

  Hello.

  I wanted to run the HP Battery Check to know how was my battery. But it does not recognize my battery.

  My battery seems to be getting worse lately, and it does it not take a charge as long as it used to do.

  I downloaded the latest HP Support Assistant (5.1.10.7), and like I said. It does not recognize my battery.

  Bright ideas?

  Edit:

  HP DV4-1210 Windows 7 Ultimate.

  FranKeRS76

  Hello

  First, stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start Notepad.

  Then download, install and run the latest version of the HP utility battery Check, on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49129.exe

  Does this work properly and if it indicates no fault with the battery?

  Best wishes

  DP - K

• HP Envy: Battery check failed

  Battery plugged in but not supported.

  Has conducted an audit of the system and received the following information:

  Battery check: primary - replace (42)

  Failure ID: U4MN7R-67H88N-XD7X1F-C0C403

  Product ID: C6N88UA #ABA

  Main battery

  Help, please. I just need to replace my battery?

  Yes, apparently, your battery is bad. If you are still in warranty HP will replace it. Start a support request by filling out the form here:

  https://support.HP.com/us-en/contact-HP/product/HP-envy-TouchSmart-Sleekbook-4-1100/5296620/model/5312197

• EliteBook 2740 recharge does not and HP product Assistant crashes when you start the battery check

  I just buy an elitebook 2740.  When I hover over the battery and plug icon in the taskbar, it says do not charge battery.  I tried to uninstall the ACPI compatible driver in the Device Manager and scan for new hardware to reinstall it, and it worked the first time.  But now it does nothing.  When I open produced tune, I get an error message and the program crashes when starting the battery check.

  Yes, I downloaded and installed the BIOS and chipset drivers and followed by the shutdown sequence.  It's the job niow.  I called Technical Support and learned that the battery does not load when it reaches a certain percentile because the computer recognizes it has a good charge.  When it is less than 95% fresh or so, it will load.  Mine does not work correctly.  Appreciate your help, I wasn't aware of this design feature before now.  Overall it was a good exercise.

• Where can I get HP Battery Check to my laptop dv7-1245dx running 64-bit Win7?

  Recently updated my computer dv7-1245dx laptop from vista to win 7 64 bit.  Where can I get HP Battery Check?  HP Advisor said that it is not installed.  Can't find it on the HP website for my model number and have not found a general download site.

  Uninstall HP Advisor. This software is outdated

  If you really need this kind of application and then install latest version of HP Support Assistant of sound

• HP Battery Check status: unknown (90)

  HP dv4-2165dx running Windows 7 64 bit with Support Assistant 5.2.9.2 and battery check 4.0.16.0

  Battery status says 'unknown', with the 100% battery charge.  Battery seems to work very well, but not checking the battery does not seem to be able to connect to it.

  When you run the battery check, it returns

  Status: Unknown (90)

  The long description is:

  Main battery

  An error occurred trying to access the battery.  Please re-insert the battery and the power adapter for a new test of the battery.

  The suggestion is to turn it off, replace the battery and AC power, I did several times.  I also followed the procedures outlined in another post about a battery check status unknown (94)... but no change.

  How can I correct this condition such that I can get a battery status check valid, like 'OK', 'Calibrate', 'Replace', etc.

  Is there a * easy * way to clean the battery contacts?

  Note: Diagnostics of HP you can run before Windows (tube exhaust when starting) indicate that the battery is "defective", perhaps because the diagnosis can also access chip smart battery.

  There is no other assignments by mentioning the battery... check (90) advanced status code just to code (94) elsewhere.

  Thanks for your help.

  db808

  Found the solution!

  There is a new version of firmware, version F.0F (appears as 'F' to the poster information) which is available in the download section software.  Version F.0F is documented as the resolution of a problem with checking Service Advisor 5.x and battery.

  I downloaded the firmware update, installed and then re-directed to battery check.  Now I have a proper status, with detailed battery status is displayed.  In my case, the battery is about 2 years old and needs to be calibrated.  But I now have a status legitimate and can go through the calibration process.

  Note: I use Advisior of Service 5.2.9.2 and says there is no update additional software that apply... .but Advisior Service missing update of Firmware and will not download and install it.

  According to the notice of Release Firmware, this firmware version applies to several laptop models.

  After I calibrate my battery, I'll try running battery check and start diagnostics.  Diagnostics boot time also scored as battery being defective in the past... with the older firmware.

  I'll post my results once completed.

  Hope this helps someone.

  db808

• a link to have my battery checked by HP support

  I would check the remaining lifetime of the battery of my laptop.

  I would be grateful if you can provide me with the support of HP link to the appropriate address

  My product. : HP 2133

  s/n: CNU8466RFK

  p/n: NK994LA #ABM

  Serial number H2133VCTm16LBN160BBCN10Ha

  Product key starts with: P6YYV.

  (I'm afraid, the rest is unreadable becaude of usage, sorry!)

  Thank you very much

  cyp4th wrote:

  I would check the remaining lifetime of the battery of my laptop.

  I would be grateful if you can provide me with the support of HP link to the appropriate address

  My product. : HP 2133

  s/n: CNU8466RFK

  p/n: NK994LA #ABM

  Serial number H2133VCTm16LBN160BBCN10Ha

  Product key starts with: P6YYV.

  (I'm afraid, the rest is unreadable becaude of usage, sorry!)

  Thank you very much

  You should have the HP Support Assistant installed on your laptop.  It has got a built-in battery test utility that will allow you to know the operational status of your internal battery.

  You can access it by clicking on HP Support Assistant-> by clicking the Troubleshooting tab-> click power, thermal and mechanical tab, then click the icon to launch the battery check.

• How can I find the HP Battery Check failure codes on a dm3-2010us

  I had the original battery fail. I ran no check of the battery on the battery failed.

  I am now on my second replacement: in both cases the new battery initially adopted the HP Battery Check, but after unexpected closures in each battery, I received the following failure codes

  Ok thank you. I followed which.

• 'Bad RTC battery, check the CMOS' on Satellite Pro 6100

  Hello... I just got a Satellite Pro 6100 and when it is started I get an error message:

  RTC BATTERY BAD
  BAD CHECKSUM (CMOS)
  Check the system. Then press the [F1] key
  _

  I can still use the laptop for about 15 minutes, but then it crashes. I did some research and discovered that it is the power supply Board. But my laptop is out of warranty and the reminder is now officially over.

  Y at - there someone who can help me?
  Thank you
  Liam

  Published by: admin

  Hi Liam

  Hmmm... I think it s not a Council but the battery of the CCF.
  Take a look in the user manual. There you should find something that exactly the message is displayed if the battery RTC (BIOS) is not charged.

  The RTC battery, you must connect the power adapter and should run the laptop for about 24 hours.
  After that the main battery has been charged, then the RTC battery starts to load.

  It will take a little longer.

• my check of battery hp stoped workin. What can I do to get it to start warking?

  my hp stoped working battery check. How can I start working.

  Hello

  I suggest that contact you HP support for better help.

  See also: http://h20239.www2.hp.com/techcenter/battery/battery_ts.htm

• Check calibration of the battery via the battery HP method

  Right now there a few things I don't understand in the image above.

  1. I did the test of flow twice now and the battery went from 3456mAh to 3878mAh which is still far from the maximum value of 5100mAh. During these tests to calibrate the besise number has increased from 19 to 21. Now the first question is what the '21' actually mean?

  2. I am doing something wrong in the calibration process? I thought I would once and then I would get the battery to its full potential.

  Notice that I've never calibrated at 1.5 years (since the day I bought it) and battery spent 4hours in 2 hours and 45 minutes.

  3. How will I be able to have two batteries? I checked the back, the bottom, the sides, but I can't find anything that would indicate to anywhere I might be able to put a battery additional in. (model HP ProBook 6450 b)

  Finally is there anything else I can do to calibrate more fast than to do this test even over and ovr again until I've hit 5100?

  Thanks in advance!

  Edit: Now 20 minutes later after having disconnected the charger, I get higher mAh values which means that something went right, but I don't know what. 13% / 700 mAh jump is quite important.

  I have done this correctly and managed or?

  

  Edit 2: As I write this just cut HP Battery Check gain 700mAh 400mAh I just got I get really frustrated and confused

  Hello

  Each battery is sooner or later going to the end.

  Why you have different values and the lack of true valuation.

  After my experience, I can tell you that battery is unable to balance the level of real life at the specified level, and it is 'normal '. That's why you see what you see. Common calibration accelerates only the end of battery life.

  See page 30 of the guide service from your cell phone here. It will show you where you can connect the second battery.

• I can't be able to find/doiwnload software check the battery.

  I go to my Advisor of PD to check my status of the battery (G60-120us Notebook) and it says unknown state, download the HP battery check now.   If I click on it it brings me to the download and support page, but there is no HP Battery Check download it that I can find!

  Please read the information located at this link: http://support.hp.com/us-en/document/c00821429.

  According to the information provided in this link, you can download and use as part of the HP Support Assistant for WIN Vista and WIN 7.

  Which computers laptops HP and Compaq HP Battery Check does support?

  HP Battery Check supports consumption all HP Vista and Windows 7, and commercial notebook PC.

• Check the battery via command line

  Is there a utility command line for battery check? I have hundreds of laptop computers to check the battery failure. I am able to deploy and install the HP Battery Check utility and then silently run the hbbc.exe/s but I don't see the newspaper. Is there another utility to do this?

  Thank you.

  So, I finally found the file that is used to produce the result of battery page.

  Run hpbc.exe/s

  After the second couple that xml file will be in the

  %ProgramData%\Hewlett-Packard\HP support Framework\Resources\Logs\BCResOut.xml

  That you can analyze and get the information you need - by comparing the result of MISTLETOE.

  ... and it took two calls to the support level 2 technique to find. They have not confirmed the existence of the /s switch and there is no docummentation.

• No option in the wizard power tab helps to check the battery and can not run standalone Tester

  HP Pavilion dv3t-2000 CTO Entertainment Notebook PC

  Windows 7 64 bit

  My laptop started to turn off the power as soon as I unplugged it, reading online, it seems that there is a problem with the battery (he acting funny recently, as soon as I unplug it go to 77%, then back to 100% as soon as I plugged it it would support in).

  I went to run the battery check HP Support Assistant breast, but I don't see this option, down he wrote 'Loading' for details of my system little matter how long I let it run.

  I downloaded the version independent battery check but it wouldn't install, it says that I need to run the test of in support Assistant.

  I also went to http://h20614.www2.hp.com/ediags/gmd/ProdDetect4Mozilla.aspx?lc=en&cc=us to analyze my system, but that also does not work, something on a runtime error and then blocks the ActiveCheck plugin.

  Your laptop is a custom model. Try to use the product number and order it on the following link:

  http://PartSurfer.HP.com/search.aspx

• My macbook pro mid-2012 is very slow. Do I need a new battery?

  Hello world

  Support on this community has helped me tremendously before so I thought I'd post again about a new problem.

  I upgraded my Mac with an SSD, which works very well, with more RAM; However, recently, it has been very slow and train, and I don't know why. RAM is not being crazy, so it must be something else.

  After reading the other posts, I'm thinking maybe I need a new battery? I mean I have 893 cycles ahah. Could someone help with this?

  Here is my log of Etrecheck:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-07 02:57:40

  Download EtreCheck from https://etrecheck.com

  Time 01:38

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 893

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  SAMSUNG SSD 850 EVO 500 G Media (disk0s2) /: 499,11 go-go (287,31 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - number: 20

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] com.globaldelight.driver.BoomDevice (1.4 - SDK 10.10 - 2016-06-03) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 162 tasks Apple

  [operation] 68 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 163 tasks Apple

  [operation] 81 tasks Apple

  Launch officers: ⓘ

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-12) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-05-12) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-12) [Support]

  [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

  [loading] com.bombich.ccchelper.plist (2015-11-30) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-02) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2015-01-16) [Support]

  [loading] net.freemacsoft.LiteIcon.LIHelperTool.plist (2014-08-26) [Support]

  [loading] org.cindori.SenseiTool.plist (2015-12-03) [Support]

  [loading] org.cindori.TEAuth.plist (2015-12-03) [Support]

  org.eyebeam.SelfControl.plist [no charge] (2016-04-28) [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2016-01-09) [Support]

  Items in user login: ⓘ

  Workflow application (/ Applications/Flux.app)

  PopClip application (/ Applications/PopClip.app)

  BetterSnapTool application (/ Applications/BetterSnapTool.app)

  Alfred 2 Application (/ Applications/Alfred 2.app)

  ClipMenu application (/ Applications/ClipMenu.app)

  Decision on application (/ Applications/Hear.app)

  Fan of Macs control application (/ Applications/Mac Fan Control.app)

  Hocus Focus application (/ Applications/Hocus Focus.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [ongoing] com.crystalidea.MacsFanControl.60192

  [ongoing] com.etresoft.EtreCheck.207712

  [ongoing] com.globaldelight.BoomDaemon

  [ongoing] com.google.Chrome.163232

  [ongoing] com.hegenberg.BetterSnapTool.49632

  [ongoing] com.naotaka.ClipMenu.52192

  [ongoing] com.pilotmoon.popclip.291872

  [operation] com.runningwithcrayons.Alfred - 2.166432

  [ongoing] com.uglyapps.HocusFocus.264992

  [ongoing] org.herf.Flux.119072

  [loading] 412 tasks Apple

  [operation] 173 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-15) [Support]

  GameFacePlugin: GameFacePlugin 1.8.0.1 - SDK 10.5 (2012-11-16) [Support]

  Unity Web Player: UnityPlayer version 5.0.3f2 - SDK 10.6 (2015-08-04) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-17)

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-11-30) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-11-30) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-17)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) obsolete! Update

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  PepperFlashPlayer: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.4.8 - SDK 10.6 (2015-02-26) [Support]

  JavaAppletPlugin: 15.0.1 - SDK 10.11 (2015-11-30) check the version of

  User Plug-ins internet: ⓘ

  samesurf_screenshare_32: Unknown (2014-08-10)

  Safari extensions: ⓘ

  1Password - AgileBits - https://agilebits.com/onepassword (2015-09-10)

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-27)

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2015-09-27)

  ClickToFlash - Marc Hoyois - http://hoyois.github.com/safariextensions/clicktoplugin/ (2015-08-04)

  Audio Plug-ins: ⓘ

  Hear: 1.1.6 - SDK 10.8 (2014-11-03) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-05-09) [Support]

  FUSE for OS X (OSXFUSE) (2015-10-25) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Destinations:

  Seagate 3TO [Local]

  Total size: TB 3.00

  Total number of backups: 4

  An older backup: 2014-12-12, 14:35

  Last backup: 2015-11-23, 08:35

  Size of backup drive: Excellent

  Size of backup 3.00 TB > (disk size 0 B X 3)

  Top of page process CPU: ⓘ

  67% Google Chrome Helper (6)

  37% Google Chrome

  6% kernel_task

  6% WindowServer

  2% PopClip

  Top of page process of memory: ⓘ

  770 MB Google Chrome Helper (6)

  Kernel_task 747 MB

  Chrome Google 188 MB

  Mdworker (9) 172 MB

  Mds_stores 164 MB

  Virtual memory information: ⓘ

  4.25 GB free RAM

  used 3.75 GB RAM (1.70 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  7 June 2016, 02:50:29 self-test - spent

  Hello. Try restarting your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support

  Try resetting the system management controller: https://support.apple.com/en-us/HT201295

  I also suggest upgrading your RAM.

  I hope this helps!