HP Beats Audio

Hello. I had my HP Pavilion dv6 for a few days and it's brand new. It works fine, but the only problem I seem to have is the volume control. When I use the volume adjust buttons (f9 and f10), sometimes it works and sometimes it doesn't. He goes on and out. When it does not, the display will show always beats drive little spin with the volume bar, but the volume is not actually changing in any way. It gets a little frustrating, so I was wondering if anyone had an answer to that.

Thank you!

-Josh

Hello

There are a few programs that can cause this problem, another common example would be Media Player Classic - unfortunately there is not much you can do.  Sometimes, minimize the window before the volume control works and sometimes not function of the software.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Beats Audio DOES not work after update windows 10.

    Beats Audio does not appear in WIndows after upgrading Windows 10. The icon is missing from the system tray, control panel and in the search bar. Cannot find the drivers in the HP store.

    Guys, please help. The audio is not good without configuration Audio Beat.

    Thank you

    Jain darshan.

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When this has completed, restart the laptop.

    When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • Beats Audio: HP ENVY Beats Audio Windows 8.1 portable computer m4

    I had to replace the hard drive of my laptop and my Beats Audio speaker volume is not as high as it should be.  I guess that a driver must be installed.

    I am running Windows 8.1.

    Please tell us if it is a driver problem and where can I find the necessary drivers and installation instructions.

    Thank you

    Please try the driver from the following link:

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59576.exe

  • Beats Audio, computer remains

    I rest my computer and now my sound does not work and I have no audio beats.

    Thank you

    Hello! @AOZ, thank you for joining the HP Forums!

    I understand that beats audio does not work on your computer.

    Please try a few steps mentioned below.

    Go to the windows desktop
    Hold the Windows key + the letter R key.
    Run dialog box opens type devmgmt.msc
    The Device Manager window opens.
    Righ click Menu select Update driver software.
    Select Browse my computer for driver software.
    Select let me pick from a list of drivers for devices on my computer.
    Click next and follow the instructions and click Finish.
    Choose the Audio device high definition.
    In the update driver warning, select Yes.

    Please provide the product number and the operating system of your computer. So, I can get you a better solution.

    Let me know how it goes!

    Have a great day!

  • HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

    Hello

    So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

    If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

    I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

    Thanks in advance.

    Hello

    I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

    Kind regards.

  • envy K220 nr: beats audio for windows 10

    After you have installed windows 10, beats audion is not entirely worked. Beats audio is present, but I can't enjoy the sound as it was before installin windows 10. It was working fine when newly purchased and windows 8 built in already. I installed almost all software audio, but in vain.plz help me to reinstall the beats audio entirely take I could enjoy original sound of bat audio.thx

    Hi, Shaw, how are you doing my friend?

    Please, run the hp support assistant and update all drivers and bios ok:

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74656.exe

    I hope that helps!

    I would give a great kindness...

    If the question is clarified, mark my answer as "solved" and click the icon of the 'hand' to provide 'Congratulations' in recognition.

    Have a great week!

  • Pavillion dv6 6119tx: beats audio drivers for windows 10?

    I've recently updated to windows 10, most of the drivers are integrated but I coul not find any beats audio drivers...

    Help, please!

    Hello:

    See if this driver works... Install and reboot the PC...

    This package contains the driver that allows Audio IDT high definition (HD) in the laptop models that arerunning an operating system supported.

    File name: sp63555.exe

  • Beats Audio has completely disappeared from my HP Envy 6 1010ea

    I've recently updated my ultrabook and the beats audio Panel completely gone!

    It was working fine before the updates (which have been "recommended by HP")...

    I can still change the function of power on and off beats using fn + b but when I go to open the audio control beats it says boot file not found...

    Any help?

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56717.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

    Kind regards

    DP - K

  • Beats Audio does not work! Features totally lost!

    Computer laptop HP Envy Touchsmart 14 specifications

    Processor - Intel i5 4th Gen

    NVIDIA GEFORCE graphics

    Hey there,

    I recently updated my laptop for Windows 8.1, and there has been problems galore. Beats Audio has stopped working. It seems rather, he is always on even though I don't want whatever. Using fn + B does not help, nor does the activation or turn it off via the control panel Audio Beats. Initially I couldn't even check box on the tab 'Listening experience' in the control panel. After you follow the steps in this thread - http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Can-t-turn-on-Beats-Audio/td-p/1201775

    Now I can manage check or uncheck the option in the Panel, but it has NO EFFECT.

    This turns out be extremely annoying, please help me understand this.

    Hello piezoelectron

    I'm sorry it took so long, but I think I have the solution for you here. I've updated a notebook here to 8.1 and after several attempts but I have the same problem you have. To solve it, I simply used the Recovery Manager to update the HP Quick Launch software provided on the laptop. Try following the steps below to see if that solves your problem.

    Step 1. The type of menu tiles "Recovery."

    Step 2. Choose Recovery Manager

    Step 3. Drivers and reinstall Applications

    Step 4. Choose the software of HP Quick Launch

    Step 5. Install

    Step 6. Restart your computer

    Now, this did not bring the Beats Audio Control Panel for me but he doesn't turn Beats Audio on and off the listening experience which is what you're after.

    I would like to once again thank you for posting on the HP Forums and hope that this solution solves your problem. Have a great weekend!

  • PC laptop Pavilion 17: Beats audio with Windows 10

    No Beats Audio since the update of Windows 10.  I tried a lot of the answer key, none does not work for me.

    Product # L0Q89UA #ABA.

    Thank you

    Rob

    Hello

    Try the following.

    Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72043.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • HP Envy 17 t j100: deleting Beats Audio

    Hello.

    I searched the forum and followed the instructions to remove the Beats Audio crapware.  Unfortunately, after removing it reinstalls itself.

    The instructions are:

    • Press Windows + R.
    • Type msconfig and click OK.
    • Click the Startup tab.
    • Uncheck the IDT Audio from PC.  It is not possible on 8.1 - can only disable
    • Click apply.
    • Reset.
    • Press on Windows + R.
    • Type devmgmt.msc , and then click OK.
    • Expand sound, video and game controllers.
    • Right click on IDT device and click Uninstall
    • Select the check box to remove the driver.
    • Reset

    So I did all that with the change in red.  The next time that I restarted, IDT reinstalls itself and beats audio is still active.

    What is strange, is that the Audio driver IDT High Def showing is a product of Ms.  Bat is not.  But there are a lot of SRS DLLs listed.   I don't know how many of these problems are related to hardware and how is 8.1.  I got beats on my computer Windows 8 with no problems.  But all of a sudden with this new computer running 8.1, I can't change anything.   Well this is not true, I can change everything and restart seems to reset at the front.

    Thanks for any help.  I'm trying to get Asio4All to work, but it is apparently not compatible with Beats, that causes the problem.  And Asio work is much more important to me than the beats.

    Thank you

    Hi there @dzilizi,

    I understand that you want to remove with Beats Audio from your system. I'm happy to help you.

    In Notepad HP Beats Audio edition, Beats Audio software is part of the IDT Audio driver. You can try to remove your current IDT driver and install a compatible version not Beats Audio. Or you can use the generic operating system driver.

    I found a beautiful little youtube video which shows a method to do this. HP laptop: Disable Beats Audio Driver

    I hope it helps

  • Beats Audio Driver for laptop HP ENVY 6-1002tx

    Hello

    When I bought the HP ENVY 6-1002tx Notebook PC, it works on Win 7 and works perfectely. But after the upgrade to windows 8 Pro I lost the audio driver Beats. System is still having IDT high definition Audio codec, but I want the original Beats audio for my laptop.

    pls help

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58635.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    Chipset Driver - Windows 8.

    Once done, press and hold the SHIFT key when you click shutdown , completely power down the laptop,

    When the laptop is turned off, press and hold the button for 10 seconds.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • Beats audio software missing after installing windows 8.1

    Hi all!

    I have a problem I would like help with. I just upgraded to windows 8 to 8.1, but now the beats audio/software interface is missing, and I can't get it back. What should I do? I have a HP ENVY m6-k088ca Sleekbook.

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61792.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, turn off the phone by holding down the SHIFT key when you click on close to temporarily prevent a "boot hybrid.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

    Restart the computer again, then check if the Beats audio Panel is now listed in the control panel.

    Kind regards

    DP - K

  • DV7-7012: Beats Audio Panel works do not (it's there, but it does nothing)

    I had to make a Windows 7 in place 'upgrade' to repair a damaged system.  The new version of windows was the same as the old (win7pro 64-bit) and I eventually installed all the patches and updates.

    But now my Beats audio Panel does not work.  No error message, just no response.  I have uninstalled/reinstalled the IDT pilot softpac (SP 59766) several times, in several ways... the result is always the same.  All the sound elements work, the driver gets in, the control panel disappears as it should during uninstallation and reappears later... but when I click the icon, nothing happens.

    • Beats audio icon appears in the notification area of the task bar and in the control panel
    • Features audio of"work", but the special effects microphone settings are all wrong and nothing else seems to have an impact on them.
    • Looking at the process manager, there is no process named "beats" or "idt" - don't know if there are supposed to be.  If I click on the icon of beats, for about 1 second, there is a marked process IDTNGUI.
    • Looking at the windows event viewer, I get the following error message:
      The failing application name: IDTNGUI.exe, version: 1.0.6418.0, time stamp: 0x500e5e6a
      Name of the failed module: KERNELBASE.dll, version: 6.1.7601.23455, time stamp: 0x573a54fc
      Exception code: 0xe0434352
      Offset: 0x000000000001a06d
      The failing application path: C:\Program Files\IDT\WDM\IDTNGUI.exe
    • Looking further, I see that the. Net4 DURATION breath also on:
      Application: IDTNGUI.exe
      Version of the Framework: v4.0.30319
      Description: The process was completed due to an unhandled exception.
      Exception info: System.IO.FileNotFoundException
      at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal (Int32, IntPtr)
      at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR (Int32)
      to the millisecond. Internal.NativeWPFDLLLoader.LoadCommonDLLsAndDwrite)
      < module >. CModuleInitialize. {ctor} (CModuleInitialize *, empty ())
      module <>. ? A0x6065ba78.CreateCModuleInitialize)
      module <>. ? A0x6065ba78. ?? __E ? A0x6065ba78@cmiStartupRunner@@YMXXZ)
      < module >._initterm_m(void* () *, Void * () *)
      < module >.   < CrtImplementationDetails >. LanguageSupport.InitializePerAppDomain
      (< CrtImplementationDetails >. LanguageSupport *)
      module <>. < CrtImplementationDetails >. LanguageSupport._Initialize
      (< CrtImplementationDetails >. LanguageSupport *)
      module <>. < CrtImplementationDetails >. LanguageSupport.Initialize
      (< CrtImplementationDetails >. LanguageSupport *)

    Missing DLL?  Missing registry keys?  Missing language files in .net?

    HELP... my mike is mainly offline until I fix this.

    Thank you

    Uninstalled all IDT package.  Reset.

    Reinstalled all package IDT.  Reset.

    Now that .net works, therefore Beats!

    Then... SOLVED!

    NOTE: it really matters what version of the IDT drivers that you install.  ... Then the SP of another model cannot work at all, or further damage the situation.

  • HP ENVY 17 t - 2000 CTO 3D: Beat audio error! HP ENVY 17 t-2000 technical 3D Director

    Hi, last week my beat audio leave work. The Committee has also disappeared. I tried to reinstall the driver IDT since driver's Web site (it is detect my laptop perfectly) after reinstall audio IDM some time the noise disappeared.

    I download the audio drivers here using auto-detection:

    http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-2000-3D-Edition-Notebook-PC-series/504623...

    Please help me... It's a little frustrating.

    The driver I have download is: driver Audio IDT high definition (HD) - sp52562.exe

    Thanks in advance

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52562.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50557.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter.  Press and hold both the power button / stop and pulse for 15 seconds, then release.

    Plug the power adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

    Kind regards

    DP - K

  • HP PAVILION DV6 - 7010eo B1K68EA BEATS AUDIO DRIVERS FOR WINDOWS 8 64-bit

    Can someone help me find the drivers of Beats Audio of this laptop.

    HP PAVILION DV6 - 7010eo B1K68EA BEATS AUDIO DRIVERS FOR WINDOWS 8 64-bit

    If you please give me a link where I can download that.

    [Personal information]

    / Arne1963.

    Hello

    If you haven't already done so, install the Chipset driver at the following link.

    Chipset Driver - Windows 8.

    Once completed, restart the laptop.

    When windows has reloaded, download and install the IDT HD Audio driver on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59654.exe

    Kind regards

    DP - K

Maybe you are looking for