HP bt500 - your Bluetooth device could not start the search for devices

Hi, I want to use my HP bt500 to connect my PC to my helmet, but I get the following error message:

"Your Bluetooth device cannot DΘmarrer him search for devices"

I downloaded and installed the Windows XP of HP bt500 software version of:
http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&product=3350927

I tried on two different computers, but they both get the same error.  I took out the bt500 my HP photo printer.  I wonder now if this bt500 is simply limited to only work with printers and not the PC as the other versions of detail.

Help, please.  Thank you.

Problem solved.  I had to download the broadcom bluetooth software was last updated.

www. Broadcom.com/support/bluetoothupdate.php

Tags: Notebooks

Similar Questions

  • Windows could not start the search service on the local computer __error 183 cannot create a file when that file already exists__Windows 7 premium

    I have a newish system running windows 7 - I noticed that sought were slow and idenified as windows search service does not start - on attempt to start it, I get the above error.   Try looking Microsoft\search\data watch applications and temporary directories apparently appearing and disappearing.   Checked disable anti-virus effect but not obvious.     GlenW

    Hi Glen,

    Could you do a guest account to see if the problem is reproduced? I want to eliminate the possibility of a corrupted user profile. Thank you!

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error: could not start the driver for hpoipm07. exe

    Will not be "copy" or "Scan to computer" it will print computer

    Hello CT003,.

    Thanks for the information, everything I was looking for, as you encounter an error scan and copy and your printer is compatible with the software I want to start by running the scanning HP Print doctor.

    Doctor Scan HP printing can be found by going to http://www.hp.com/go/tools that the doctor is used to solve the various problems that can occur that cause the printer to not print, scan or have problems of global connectivity. It is the first tool when you troubleshoot any problem that belongs to these three compartments, it is help to solve the problem or point us in the right direction with regard to the origin of the problem.

    After you run the tool post back with your results.

  • ohasd could not start: ioctl inappropriate for device - standalone grid root.sh installation is not

    Hi all

    During the installation of grid software Oracle 11 g root.sh (11.2.0.4) 2 (standalone) OL6.3 failed with the below mentioned error.

    ===========Error============


    Assistant configuration database when a database is created
    Finished to turn the generic part of the root.sh script.
    Now root product-specific actions will be performed.
    2015-07-08 15:09:27: verification of superuser privileges
    2015-07-08 15:09:27: user has superuser privileges
    2015-07-08 15:09:27: analyzing the host name
    Using the configuration settings file:

    /U01/app/grid/product/11.2.0/grid/CRS/install/crsconfig_params
    Create the trace directory
    ADD LOCAL MODE
    Creating OCR keys for the user 'oracle', privgrp 'oinstall '...
    Successful operation.
    CRS-4664: node kchjovm42 pinned successfully.
    Adding to inittab demon
    CRS-4124: Oracle high availability Services startup failed.
    CRS-4000: Start command has failed, or completed with errors.
    ohasd could not start: Inappropriate ioctl for device
    ohasd could not start: Inappropriate ioctl for this device

    /U01/app/grid/product/11.2.0/grid/CRS/install/roothas.pl line 296.
    [grid root@kchjovm42] #.

    ===============================

    Given that the error has been corresponding exactly to Doc-ID 1607600.1 I tried to follow the steps mentioned but he couldn't go well, release pasted below,

    [root@kchjovm42 bin] # initctl reload configuration

    [root@kchjovm42 bin] # initctl start oracle-ohasd

    initctl: unknown employment: oracle-ohasd

    [root@kchjovm42 bin] # initctl list | grep oracle

    [root@kchjovm42 bin] #.

    While they inspected I found that initctl has no service oracle-ohasd that there are listed.

    Manual start of service has also failed,

    [root@kchjovm42 init] # initctl start oracle-ohasd

    initctl: unknown employment: oracle-ohasd

    [init root@kchjovm42] #.

    There are a lot of notes and documents available on the community & MOS but not get a voucher for my case. Grateful if you can help with this problem.

    Thank you

    Abhijit

    Refer to OHASD could not start: Inappropriate ioctl for device [1069182.1 ID]

    HTH

    -Pavan Kumar N

  • I have error #1053 windows could not start the printer spooler. Help

    Windows could not start the printer spooler. I received the error #1053.
    whatever it is sent to the printer never finished loading and crashes to the top
    my computer, so I have to re - start.

    This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

  • Could not start the time service windows on the local computer 2 error

    Cannot update the system clock of time Internet.

    After double click to display the time in the taskbar, the Date and time properties window appears.

    Then I time tab-click Internet, and then click Update now - this produces the following message...
    "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
    Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
    I click Start the service and get the following message...
    "Could not start the time service windows on local computer."
    "error 2: the system cannot find the file specified."
    Help!  What now?

    Hello

    Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  • Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

    Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

    Hello

    1. what application or antivirus security suite is installed and your current subscription?

    2 Norton (another) or a McAfee application ever installed on this machine?

    3. What are the fix applications that you used so far to try to fix this problem?

    Try the next method and check if that helps you with the question of the 127 error you receive.

    Method 1: Rdding the DLL file by doing the following:

    1. Click Start and click Run, in the search box type CMD and press to enter.
    2. right click on CMD in the list and click "Run as Administrator".
    3. type the following command and press ENTER. Regsvr32 msvcp71.dll
    4. close the command prompt window.

    Method 2: run the file system (CFS) Checker:

    (Note: you need an XP installation disk to start the System File Checker search.)

    The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

    1. click on start, and in the box to start, search type CMD
    2. right click on CMD in the list and click "Run as Administrator"
    3. type the following command and press ENTER. Sfc/scannow
    4. close the command prompt window.

    For more information on scan SFC (System File Checker), please look in the link mentioned below.

    http://support.Microsoft.com/kb/310747

    I hope this helps.

  • Could not start the Windows Vista firewall

    Hi all

    I can't start the Windows Firewall service in anyway.

    I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
    I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
    I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
    As it seems, I can not start it this way or the other.
    I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
    In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
    Therefore, it does not. The service is set to automatic.
    I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
    Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
    So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
    P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
    ?
    EDIT:
    The base filtering engine
    IKE and AuthIPsec Keying Modules
    Internet Connection Sharing (ICS)
    IPsec policy agent
    Routing and remote access
    Windows event collector
    Windows Firewall
    All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.
    EDIT:
    I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».
    EDIT:
    Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

    Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  • Could not start the Windows Security Center service.

    Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!

    the error code says...

    one or more ActiveX controls could not be displayed because that is:

    1. your current prohibiti of security settings on this page activex controls running or,

    2. you have blocked an editor of one of the controls.

    Hello

    ·        Since when are you facing this problem?

    ·        Remember to make changes to the system?

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    I suggest you follow the steps mentioned below.

    a. click on Start menu and type regedit.exe in the start search box and press ENTER.

    b. navigate to the following location. You must remove 1 (parasite) of additional area

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
    with number Pseudo-graphique, you will see before the number of zone 0.

    c. check to see if the problem is resolved;

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows could not start the diagnostic policy service error 5 access is denied

    This started happening when I accidentally turned off my computer while it was the starter.

    I tried sfc/scannow, I did the CMD (net localgroup administrator) thing and tried manually from politics, nothing helps.

    Here is a screenshot of what, in my view, seems to be the problem. I am the only administrator of my computer,

    Hi John,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You made any hardware or software changes on your computer before the show?

    Thank you to provide detailed information on the issue and your efforts to resolve.

    This problem can occur for the following reasons:

    -Windows Firewall is not defined by default.
    -Windows Firewall does not start.
    -Windows could not start the Windows Firewall.

    I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.
    Reference:
    Some services do not start in Windows Vista and Windows 7
    http://Support2.Microsoft.com/kb/943996

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • BlackBerry Smartphones could not start the camera

    When you try to start the camera, I get this message... Could not start the camera.  Close other applications and try opening the camera again.

    I have nothing else other running the phone itself is waiting for a call.  I can't find anything on the Blackberry support for the same problem unless I'm missing it.

    When I got on the phone a few months previously, it worked fine and I could send pictures, now he's stuck.

    Thanks for any help.

    CB

    Hello

    It's worth a try:

    Go to the OPTIONS - ADVANCED OPTIONS - HOST ROUTING TABLE click here to enter, then the menu button to register now.

    You will receive an email for verification.

    Remove the battery while the device is activated, replace after one minute,

    Let the device reboot 1-3 minutes, try again the camera. Please let me know! Thank you

  • Windows could not start the Microsoft Office Service on the local computer

    The whole error is

    "Windows could not start the Microsoft Office Service on the local computer error 1053; Service has failed to demand launch or timely control.
    It seems that this instance of office 2013 has stopped working.
    Win7 64 bit machine with all sorts service packs, etc. was in a field, we moved to a new domain, and it worked well for one day, now it has this problem. Any advice or suggestions would be helpful.

    Hello

    Since you are faced with the question after changing to the new domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

    Forums TechNet Windows 7

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

    Problems with VSS and DTC... dunno how or serious errors are

    One of the two messages I get the message this is the right place to post

    Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

    Operation:
    Get an interface that can be called by for this provider
    List of interfaces for all providers support this context

    Context:
    Provider ID: {262b716e-bb23-41b5-aaef-e2c15e767167}
    Class ID: {790f2886-9889-4c99-8ef5-531add05d044}
    Snapshot context: 0
    Snapshot context: 0

    Hey artinusa,.

    Welcome to the Microsoft Answers site.

    This error message is seen only in a Windows Server environment.

    The community more suited for this problem would be the Microsoft TechNet community. Please post your query it better support.

    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

    Have a great day.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

    Please help me! ....
    Audio service does not
    I tried Services.msc and tried starting windows Audio...
    The following error has come!
    Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
    There is a sign of X in the audio icon...
    and when I click on this audio icon... TROUBLESHOOTER OPENS...
    all this happened all of a sudden!
    Please help me!
    Thank you.
    Nischal Sp

    Please provide the error screenshot more better assitance. Also, try this:

    Try to copy and merge the audio from another Windows 8 or better service.

    You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

    Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

    While copy on your machine and merge. Then restart your system.

    Otherwise reset Windows 8:

    http://www.kapilarya.com/how-to-reset-Windows-8

    Good luck once again :)

  • SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

    I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

    My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

    I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

    I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

    I'll be dilly, or is it a problem in general, experienced by others?

    I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

    I appreciate your time and efforts.

    Hello

    I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

    Please, use the start command to start in the background of a single command window / batch script:

    beginning of "locator" cmd /c sqlf locator...

    beginning of "server1" cmd /c sqlf server...

    etc.

    Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

    Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

    Thank you

    Felicia

    Post edited by: SumedhWale

Maybe you are looking for

  • Need new HDD for my Satellite C855 1RL

    My drive hard internal is not read and was told that I need a new. Where can I buy a new HDD for a Satellite C855 1RL, and what kind of money it costs. I have the recovery disks Thank you

  • Re: Satellite L500 - HARD drive not recognized in BIOS

    Hi guys,. Yesterday, my mother-in-law has been using his computer and play some games. The computer froze and I had to force a shutdown. Upon restart, the computer continued to give the following message is displayed:PXE - E61: Media control failure,

  • get programmatically the IP address of the PC

    is there some query node or system of property that returns a string of the host address IP of the PC?

  • You must stop your request before the engine may stop

    I have an integrated application that uses LV DSC 6.0.2. The application starts and stops the engine tag programmatically. The application works fine, but on some machines, I'll get continuously the next dialog box when I try to stop the engine of th

  • R.I.P. E270? -Headphone Jack short

    Hi all My e270 has a short circuit in the headphone jack and the left channel is missing, unless I have move the plug.  I called Sandisk support to see if I could get it fixed, and what it might cost, but they don't fix them and recommend either to r