HP c309g: scans not save (vista OS)

Similar Questions

• Not able to scan. How to scan and save a document using Vista?

  Since my PC doesn't have a program Windows Fax Scan &, how to scan and save a document using Vista?

  Hello

  I suggest you to visit these links and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-document-or-file

  http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions

  It will be useful.

• Basic OS Wndows Vista on DVD - R 16 X, received the 0x4ff02 error code. Therefore, can not save OS.

  Original title: * e-mail address is removed from the privacy *.

  To try to save, basic OS Wndows Vista on DVD - R 16 X, received the 0x4ff02 error code. Therefore, can not save OS.

  Hi Brad blair,.

  ·         What is the full error message?

  ·         You did changes to the computer before the show?

  Please check the error code that you provided as it seems to be incorrect.

  Follow the suggestions below for a possible solution:

  Method 1: You can try to perform the backup on a different DVD and check if it works.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  You can also see the following article for more information on the backup:

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Let us know the results.

• HP 4620: HP 4620 scans very well, but could not save the analysis in a file

  The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

  Hey @motikama,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Uninstall all software associated with the printer to your computer.
  2. Restart your PC.
  3. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP OfficeJet Pro 8710: Scans PDF and editable text will not save

  When I scan a document to searchable PDF or won't save a resulting file to editable text (OCR).

  The error message says "The Application from HP could not save the file to the specified location."

  I tried to save in various different locations with the same result.

  I can save other formats including PDF and normal images.

  Hello

  Right click on the start icon and select programs and features.

  Locate the I.R.I.S OCR application and uninstall it.

  Then download and run the latest drivers for your printer below:

  http://ftp.HP.com/pub/softlib/software13/Printers/OJ871/OJ8710_Full_WebPack_1881.exe

  Once the installation is displayed, close the specified window.

  Then, right click the button start and select run.

  type %temp%, and then press OK.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the optional folder.
  Right-click on IrisOCR.msi (Windows Installer), then choose install.

  Once this is done, open the HP software and try to scan the image, you can see any difference?
  
  Kind regards
  Shlomi

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After upgrade to Vista, the desktop Setup does not save, but he returned each time unwanted installation

  My computer (laptop) did an automatic update of Vista. Since the restart, he lost all cookies, and all applications have behaved as if they were never used.  The files are OK. I had to reset the desktop resolution because it came with something too big. But it does not save the installation program, every time that the computer starts again (even after having his sleep), the office returns in a default setting that I don't like.  Why didn't he save properly?  I have to back to the resolution I love every time. The aspect ratio of the sidebar is also evil in this default value. The clock appears as an oval, for example. I must go to the video driver every time, set the desktop resolution seems correct.  In addition, the sidebar doesn't seem to have an option to display seamlessly, but is a big silver margin is too large for my taste.
  My office was working great before the upgrade, now he isn't very good at all.  How can I fix it so it will stay the way I like it?

  Thank you very much for your answer.  I solved this problem.  He has been
  caused by the last windows update. I think that the file was KB2524375. I have
  uninstalled and everything is back to normal. The windows update (which
  says he has been recommended by Microsoft) completely changes the configuration, disable
  Aero, etc. so changes can not be made.
  There is no error message, it was as if he superimposed a very primitive
  version of windows. Of course, I do not recommend this update.
  Anyway, it's fixed and I'm so happy!

  Thank you!
  Rofa1234

• Scan does NOT save to .jpeg

  C410a all-in-One guidance is clear... Press scan and save it as JPEG to a USB stick or a memory card. Have scanned a document at the same time, at specific times, and is the saved file (read when I insert the way to read from my PC). HPIMAGE. VFS. Cannot find application to read the. VFS and convert .jpeg or .pdf. Appreciate any help.

  MAHtrouble, your USB key (or whatever card you used) there should also be a folder named DCIM. This is the default folder that creates and updates the image files in the printer. Open this folder to find your scanned images.

  The VFS is just a Temp file with the HP printer uses to navigate recorded with more images soon. It is not supposed to be opened by you and can be ignored.

• Windows Fax and Scan for Windows Vista does not appear under all programs

  Windows Fax and Scan for Windows Vista does not appear on my computer under all programs - where he might or he is still in charge?

  If you have Vista Home Basic and Vista Home Premium, they do not come with Fax software included.

  You will need software 3rd party Fax:

  http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon. Mick Murphy - Microsoft partner

• Need to Format, any serious, not from Vista DVD with pc problem

  I bought a m8300f HP from Circuit City last year. It's a great PC. I had the fire-dog team (the equivalent of Best Buy Geek Squad) install a nVidia GeForce 8800 GT video card in the computer, because the lack of a decent video card is the only complaint I had. They have done professionally without voiding the warranty.

  It's been a year now, I moved away from this place of Circuit City, and the company will also slowly out of business. I'm here, and my computer is having a problem. It is with direct X or something else like a virus. Be that as it may, I am unable to run 80% of games on my PC (it's almost 30 games old like System Shock 2 and as new as Crysis Warhead).

  This isn't my problem. I do not in the face of that, I'm looking at the Format Office (as I've been meaning to for a month or two now) which will probably solve some problem I have (aka get rid of the virus, where it exists - and I scanned twice - or start over from scratch with direct-X.)

  Here's my problem: I want to format drives C and E of the desktop computer, which normally is easy, HOWEVER:

  1. the office is bought in-store, so I had no DVD installation Vista or Vista Serial Key #. I don't have installation CD

  2. I never had any type of installation CD for my card GeForce 8800 video Circuit City installed without extra cost other than the purchase price.

  3. I have NO installation CD for ANY program, any driver, whatever it is. I have a desktop computer that needs reformatting and nothing more than that. No CD, no papers with n ° of series's. absolutely nothing.

  What can I do? It is even POSSIBLE to format? Can I save Vista and all the drivers required to install once it has finished formatting?

  Or am I "screwed"?

  I look forward to a response and I can answer any additional questions. I have all day free and I have 35 DVD-R and CD - R 50, just in case I have to save something.

  Help?

  Message edited by Wek11 on 02/28/2009 10:07
   
  Edit: I have Word from someone else that I don't need any other CD for my desktop PC. I use the onboard sound of my motherboard. They told me that my nVidia card I could get the drivers on the internet and I could do the same thing for my processor etc. He's right? He said everything I need to worry is to get my vista OS re-installed, and after that the computer runs like new?
  Message edited by Wek11 on 02/28/2009 10:16

  In fact, I just started my pc and found the Recovery Manager of the system that supposedly it resets to factory settings and re installed Vista on its own.

  We'll see if it actually works. Thanks if. I appreciate the help, better phone service who was trying to charge me $ 100 to renew my warranty of the phone support when all I need to know had nothing to do with HP, and everything to do with the way Windows works

• The analyses do not save on computer

  HP Officejet Pro L7680 all-in-One - ethernet wired to the router of capsule appletime.  Wireless for laptop Studio of Dell XPS 1640, 64-bit, Vista Home premium OS. Version 14 HP Centre of Solution.

  Everything works well except scans disappear after scanning.  I rebooted, disconnected and started, uninstalled and reinstalled the driver several times and run the troubleshooting HP software.  Nothing solves the problem.  It worked fine when I first came to this printer, and then one day it no longer works.

  This happened more than two years.  I even paid iYogi to solve the problem and after many hours of them control my computer, they have given up and said that they could not do.  They said I had to contact HP.  I just lived with it because I don't want to invest more money in this problem.  The last time that I asked HP for help with a question, they just sold me a new printer... this one.  This day expertise is probably the last time I'll try to fix it.

  Fake Hi-

  You can try the steps in this post to see if its applicable to your question:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Solution-Center-does-not-save-scanned-files-cue-14/m-p/534675#M13622

  Jeremy

• HP3520 scan and save it to file

  I also have an old scanner flat HP2400. Scanned image is saved in my ScannerImagePrive folder on my pc (Packard Bell with Vista). An image scanned in August 2013 will be saved in the C:\Users\xxxxx\Documents\ScannerImagesPrive\2013-08(aug file). During the beginning of September, a new folder C:\Users\...\ScannerImagesPrive\2013-09(sep made following analysis) will be becreated and new scanned image is saved in the new file automatically. A wonderful and effective solution.

  With my 3520, scanned images will be saved in C:\Users\xxxxx\Documents\ScannerImagesPrive\ not in the folder existing for the respective month.

  Where and how can I configure images scanned from my HP3520 will be saved in the same way as with my HP2400

  Hi Ernst-01,

  I don't know exactly what you're talking about. I have an older HP and was last night with the digitization Solution Center. I came across the option to set the scan to save in a folder under monthly to this older software.

  The old HP 2400 uses older than the HP 3520 software. 3520 software does not allow for the option you are looking for. I checked the settings in the HP scan under Advanced settings and Destination folder and options do not find.

  Only I can suggest you create your own monthly subfolders in the main folder, you save to and each month you will need to change your scan destination to the folder of the month. It's certainly not as convenient, but it's the only option I can think. Automatic is always more convenient than the manual, but I thought that this suggestion was better then not at all.

  Hope it will be useful.

• OfficeJet 6110 all-in-one: officejet 6110 all-in-one, window 10, scan and save to PDF

  I always love this printer and do not want to give up yet.  I was able to scan and save to PDF in the window 8 but after upgrade, I am unable to find a driver upgrade to be able to scan and save to the PDF format.  I can only managed to save. TIF, PNG or JPEG.  I need to scan and save to PDF to send an acknowledgement of health to the health care provider.  Any help would be greatly appreciated.

  Yours

  Hello

  Try the HP scanning and Capture app below:

  https://www.Microsoft.com/en-NZ/store/p/HP-scan-and-capture/9wzdncrfhwl0

  So, try the Windows Scan application:

  https://www.Microsoft.com/en-us/store/p/Windows-scan/9wzdncrfj3pv

  Kind regards

  Shlomi

• When I scan for Windows Vista Service Pack update (published 4/2009) comes in,

  I redid my computer a few months ago restore to factory settings and restore my files from a backup disk. Everything seemed to work properly.  A few weeks ago a full scan found a worm & some virus which I removed. Now, I have a problem with the updates. When I scan for Windows Vista Service Pack update (published 4/2009) arrives.  When I click to install it, it is saying it is correctly installed (in 30 seconds) and yet he continues to come when I'm scanning for updates.    Should I restore settings again?  After looking for info on the forums of windows, I did the System File Checker to check corrupt files.  Several corrupted files appear in the details of the SFC.  But their fixation is "over my head".   I glued the SFC details below. Any help would be appreciated.  Thank you

  2012-09-04 11:51:44, info CSI 00000006 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:44, transaction Info CSI 00000007 [SR] beginning verify and repair
  2012-09-04 11:51:47, info CSI 00000009 [SR] full audit
  2012-09-04 11:51:48, CSI of information 0000000 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:48, CSI Info 0000000b transaction [SR] beginning verify and repair
  2012-09-04 11:51:53, CSI to 0000000 d [SR] full audit information
  2012-09-04 11:51:53, CSI 0000000e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:53, CSI Info 0000000f transaction [SR] beginning verify and repair
  2012-09-04 11:51:55, info CSI 00000011 [SR] full audit
  2012-09-04 11:51:56, info CSI 00000012 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:56, transaction Info CSI 00000013 [SR] beginning verify and repair
  2012-09-04 11:51:57, info CSI 00000015 [SR] full audit
  2012-09-04 11:51:57, info CSI 00000016 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:57, Info CSI 00000017 [SR] beginning verify and repair
  2012-09-04 11:51:59, info CSI 00000019 [SR] full audit
  2012-09-04 11:51:59, CSI Info 0000001 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:59, CSI Info 0000001 b transaction [SR] beginning verify and repair
  2012-09-04 11:52:01, CSI Info 0000001 d [SR] full audit
  2012-09-04 11:52:01, 0000001e Info [SR] CSI components check 100 (0 x 00000064)
  2012-09-04 11:52:01, CSI Info 0000001f transaction [SR] beginning verify and repair
  2012-09-04 11:52:03, info CSI 00000021 [SR] full audit
  2012-09-04 11:52:03, info CSI 00000022 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:03, transaction Info CSI 00000023 [SR] beginning verify and repair
  2012-09-04 11:52:04, info CSI 00000025 [SR] full audit
  2012-09-04 11:52:05, info CSI 00000026 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:05, the transaction Info CSI 00000027 [SR] beginning verify and repair
  2012-09-04 11:52:06, info CSI 00000029 [SR] full audit
  2012-09-04 11:52:07, CSI Info 0000002 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:07, CSI Info 0000002b transaction [SR] beginning verify and repair
  2012-09-04 11:52:09, info CSI 0000002d [SR] full audit
  2012-09-04 11:52:09, CSI [SR] 0000002e Info components check 100 (0 x 00000064)
  2012-09-04 11:52:09, CSI Info 0000002f transaction [SR] beginning verify and repair
  2012-09-04 11:52:11, info CSI 00000031 [SR] full audit
  2012-09-04 11:52:12, info CSI 00000032 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:12, transaction Info CSI 00000033 [SR] beginning verify and repair
  2012-09-04 11:52:13, info CSI 00000035 [SR] full audit
  2012-09-04 11:52:14, info CSI 00000036 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:14, transaction Info CSI 00000037 [SR] beginning verify and repair
  2012-09-04 11:52:15, Info CSI 00000039 [SR] check complete
  2012-09-04 11:52:16, CSI Info 0000003 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:16, CSI Info 0000003b transaction [SR] beginning verify and repair
  2012-09-04 11:52:19, info CSI 0000003d [SR] full audit
  2012-09-04 11:52:19, CSI 0000003e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:52:19, CSI Info 0000003f transaction [SR] beginning verify and repair
  2012-09-04 11:52:24, info CSI 00000041 [SR] full audit
  2012-09-04 11:52:24, info CSI 00000042 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:24, transaction Info CSI 00000043 [SR] beginning verify and repair
  2012-09-04 11:52:29, info CSI 00000046 [SR] full audit
  2012-09-04 11:52:29, info CSI 00000047 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:29, transaction Info CSI 00000048 [SR] beginning verify and repair
  2012-09-04 11:52:33, CSI Info 0000004a Verify [SR] full
  2012-09-04 11:52:34, CSI Info 0000004 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:52:34, CSI Info 0000004 c [SR] beginning verify and repair operation
  2012-09-04 11:52:37, CSI 0000004f [SR] Verify Info full
  2012-09-04 11:52:38, info CSI 00000050 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:38, Info CSI 00000051 [SR] beginning verify and repair
  2012-09-04 11:52:43, info CSI 00000053 [SR] full audit
  2012-09-04 11:52:43, info CSI 00000054 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:43, transaction Info CSI 00000055 [SR] beginning verify and repair
  2012-09-04 11:52:51, CSI 0000005f [SR] Verify Info full
  2012-09-04 11:52:51, info CSI 00000060 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:51, transaction Info CSI 00000061 [SR] beginning verify and repair
  2012-09-04 11:52:55, info CSI 00000063 [SR] full audit
  2012-09-04 11:52:56, info CSI 00000064 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:56, transaction Info CSI 00000065 [SR] beginning verify and repair
  2012-09-04 11:53, info CSI 00000067 [SR] full audit
  2012-09-04 11:53, info CSI 00000068 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53, transaction Info CSI 00000069 [SR] beginning verify and repair
  2012-09-04 11:53:05, CSI Info 0000006b Verify [SR] full
  2012-09-04 11:53:06, components of CSI Info 0000006 c [SR] 100 audit (0 x 00000064)
  2012-09-04 11:53:06, CSI Info 0000006 d [SR] beginning verify and repair transaction
  2012-09-04 11:53:14, CSI Info 0000006f Verify [SR] full
  2012-09-04 11:53:15, info CSI 00000070 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:15, transaction Info CSI 00000071 [SR] beginning verify and repair
  2012-09-04 11:53:24, Info CSI 00000075 [SR] check complete
  2012-09-04 11:53:24, info CSI 00000076 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:24, transaction Info CSI 00000077 [SR] beginning verify and repair
  2012-09-04 11:53:38, info CSI 00000079 [SR] full audit
  2012-09-04 11:53:38, CSI Info 0000007 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:38, CSI Info 0000007 b transaction [SR] beginning verify and repair
  2012-09-04 11:53:52, CSI Info 0000007 d [SR] full audit
  2012-09-04 11:53:52, CSI 0000007e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:52, CSI Info 0000007f transaction [SR] beginning verify and repair
  2012-09-04 11:53:55, info CSI 00000081 [SR] full audit
  2012-09-04 11:53:55, info CSI 00000082 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:55, transaction Info CSI 00000083 [SR] beginning verify and repair
  2012-09-04 11:53:57, info CSI 00000085 [SR] full audit
  2012-09-04 11:53:57, info CSI 00000086 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:57, Info CSI 00000087 [SR] beginning verify and repair
  2012-09-04 11:53:59, info CSI 00000089 [SR] full audit
  2012-09-04 11:53:59, CSI Info 0000008 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:59, CSI Info 0000008b transaction [SR] beginning verify and repair
  2012-09-04 11:54:09, 000000 a 9 CSI Info [SR] verification complete
  2012-09-04 11:54:10, 000000aa CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:10, CSI Info 000000ab transaction [SR] beginning verify and repair
  2012-09-04 11:54:11, 000000ad CSI Info [SR] verification complete
  2012-09-04 11:54:11, 000000ae CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:11, 000000af CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:14, 000000 b 1 CSI Info [SR] verification complete
  2012-09-04 11:54:15, 000000 b 2 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:15, 000000 b 3 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:19, 000000 b 5 CSI Info [SR] verification complete
  2012-09-04 11:54:19, 000000 b 6 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:19, 000000 b 7 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:26, 000000 b 9 CSI Info [SR] verification complete
  2012-09-04 11:54:27, 000000ba CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:27, 000000bb CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:32, 000000bd CSI Info [SR] verification complete
  2012-09-04 11:54:32, 000000be CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:32, CSI Info 000000bf transaction [SR] beginning verify and repair
  2012-09-04 11:54:38, CSI Info 000000 c 1 [SR] full check
  2012-09-04 11:54:38, CSI Info 000000 c 2 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:38, CSI Info 000000 c 3 [SR] beginning operation check and repair
  2012-09-04 11:54:42, CSI Info 000000 c 5 [SR] full check
  2012-09-04 11:54:42, CSI 000000C6 [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:54:42, CSI Info 000000 c 7 [SR] beginning operation check and repair
  2012-09-04 11:54:46, CSI Info 000000 c 9 [SR] full check
  2012-09-04 11:54:47, 000000 CSI Info [SR] this component check 100 (0 x 00000064)
  2012-09-04 11:54:47, CSI Info 000000cb transaction [SR] beginning verify and repair
  2012-09-04 11:54:57, CSI Info 000000dc Verify [SR] full
  2012-09-04 11:54:57, Info CSI [SR] 000000dd components check 100 (0 x 00000064)
  2012-09-04 11:54:57, CSI Info 000000de transaction [SR] beginning verify and repair
  2012-09-04 11:55:08, 000000f4 CSI Info [SR] verification complete
  2012-09-04 11:55:09, 000000f5 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:09, CSI Info 000000f6 transaction [SR] beginning verify and repair
  2012-09-04 11:55:30, 000000f8 CSI Info [SR] verification complete
  2012-09-04 11:55:31, 000000f9 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:31, 000000fa CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:55:42, CSI Info 000000 fc [SR] full audit
  2012-09-04 11:55:42, 000000fd CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:42, CSI Info 000000fe transaction [SR] beginning verify and repair
  2012-09-04 11:55:55, info CSI 00000100 [SR] full audit
  2012-09-04 11:55:55, info CSI 00000101 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:55, transaction Info CSI 00000102 [SR] beginning verify and repair
  2012-09-04 11:55:57, info CSI 00000104 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000106 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000107 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:56:01, CSI Info 0000010a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:56:01, CSI Info 0000010 c [SR] full audit
  2012-09-04 11:56:01, components of CSI Info 0000010 d [SR] 100 audit (0 x 00000064)
  2012-09-04 11:56:01, Info CSI 0000010e transaction [SR] beginning verify and repair
  2012-09-04 11:56:06, info CSI 00000110 [SR] full audit
  2012-09-04 11:56:06, info CSI 00000111 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:06, transaction Info CSI 00000112 [SR] beginning verify and repair
  2012-09-04 11:56:11, info CSI 00000115 [SR] full audit
  2012-09-04 11:56:11, info CSI 00000116 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:11, transaction Info CSI 00000117 [SR] beginning verify and repair
  2012-09-04 11:56:24, Info CSI 00000119 [SR] check complete
  2012-09-04 11:56:24, CSI Info 0000011 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:56:24, CSI Info 0000011b transaction [SR] beginning verify and repair
  2012-09-04 11:56:31, CSI Info 0000011 d [SR] full audit
  2012-09-04 11:56:31, CSI 0000011e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:31, CSI Info 0000011f transaction [SR] beginning verify and repair
  2012-09-04 11:56:38, info CSI 00000121 [SR] full audit
  2012-09-04 11:56:39, 00000122 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:39, transaction Info CSI 00000123 [SR] beginning verify and repair
  2012-09-04 11:56:45, info CSI 00000125 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000127 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000128 [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:56:49, CSI Info 0000012b [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:56:50, info CSI 0000012d [SR] full audit
  2012-09-04 11:56:50, CSI 0000012e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:50, CSI Info 0000012f transaction [SR] beginning verify and repair
  2012-09-04 11:56:56, info CSI 00000131 [SR] full audit
  2012-09-04 11:56:56, info CSI 00000132 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:56, transaction Info CSI 00000133 [SR] beginning verify and repair
  2012-09-04 11:57:05, info CSI 00000135 [SR] full audit
  2012-09-04 11:57:06, info CSI 00000136 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:06, transaction Info CSI 00000137 [SR] beginning verify and repair
  2012-09-04 11:57:18, CSI Info 0000013a Verify [SR] full
  2012-09-04 11:57:18, CSI Info 0000013 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:18, CSI Info 0000013 c [SR] beginning verify and repair operation
  2012-09-04 11:57:22, Info CSI 0000013e [SR] full Verify
  2012-09-04 11:57:23, CSI 0000013f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:23, transaction Info 00000140 CSI [SR] beginning verify and repair
  2012-09-04 11:57:29, info CSI 00000142 [SR] full audit
  2012-09-04 11:57:29, info CSI 00000143 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:29, transaction Info CSI 00000144 [SR] beginning verify and repair
  2012-09-04 11:57:34, Info CSI 00000146 [SR] full check
  2012-09-04 11:57:34, Info CSI 00000147 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:34, transaction Info CSI 00000148 [SR] beginning verify and repair
  2012-09-04 11:57:42, CSI Info 0000014a Verify [SR] full
  2012-09-04 11:57:42, CSI Info 0000014 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:42, CSI Info 0000014 c [SR] beginning verify and repair operation
  2012-09-04 11:57:51, Info CSI 0000014e [SR] full Verify
  2012-09-04 11:57:51, CSI 0000014f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:51, transaction Info CSI 00000150 [SR] beginning verify and repair
  2012-09-04 11:57:55, info CSI 00000152 [SR] full audit
  2012-09-04 11:57:55, info CSI 00000153 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:55, transaction Info CSI 00000154 [SR] beginning verify and repair
  2012-09-04 11:58, info CSI 00000156 [SR] full audit
  2012-09-04 11:58:01, info CSI 00000157 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:01, Info CSI 00000158 [SR] beginning verify and repair
  2012-09-04 11:58:05, CSI Info 0000015a Verify [SR] full
  2012-09-04 11:58:05, CSI Info 0000015 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:58:05, CSI Info 0000015 c [SR] beginning verify and repair operation
  2012-09-04 11:58:10, Info CSI 0000015e [SR] full Verify
  2012-09-04 11:58:11, CSI 0000015f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:58:11, transaction Info CSI 00000160 [SR] beginning verify and repair
  2012-09-04 11:58:16, Info CSI 00000162 [SR] check complete
  2012-09-04 11:58:17, info CSI 00000163 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:17, transaction Info CSI 00000164 [SR] beginning verify and repair
  2012-09-04 11:58:20, Info CSI 00000166 [SR] check complete
  2012-09-04 11:58:20, 00000167 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:20, transaction Info CSI 00000168 [SR] beginning verify and repair
  2012-09-04 11:58:24, CSI Info 0000016a Verify [SR] full
  2012-09-04 11:58:25, CSI Info 0000016b [SR] audit 92 (0x0000005c) components
  2012-09-04 11:58:25, CSI Info 0000016 c [SR] beginning verify and repair operation
  2012-09-04 11:58:31, Info CSI 0000016e [SR] full Verify
  2012-09-04 11:58:31, CSI 0000016f [SR] repair 2 Info components
  2012-09-04 11:58:31, transaction Info CSI 00000170 [SR] beginning verify and repair
  2012-09-04 11:58:31, info CSI 00000172 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000176 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, Info CSI 00000177 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:58:31, CSI Info 0000017a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:58:31, CSI Info 0000017 c [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, CSI Info 0000017 d [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:58:31, info CSI 00000180 [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:58:32, info CSI 00000182 [SR] full repair
  2012-09-04 11:58:32, info CSI 00000183 [SR] validation of transaction
  2012-09-04 11:58:32, info CSI 00000187 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  Hi Mzvern,

  ·         If she invites only to install Vista Service Pack?

  That Factory Restore is the last step in resolving this issue.

  Follow these steps to see what Windows Update is originally the question or any error message/code:

  a. click Start, type Update in the start search box.

  b. in the list of results, click Windows Update.

  (c) in the left pane, click view update history.

  In the meantime, follow the suggestions below for a possible solution:

  Method 1: I suggest you follow the article and then check if it solves the problem.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

   

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: For cause of CFS, it wasn't able to repair files of Member, you can follow these steps.

  If the System File Checker tool cannot repair a file, follow these steps:1.At a command prompt, type the following command and press ENTER:

  takeown /f Path_And_File_Name

  For example, type takeown /f E:\windows\system32\jscript.dll.

  2. type the following command and press ENTER to grant administrators full access to the file:

  ICACLS Path_And_File_Name/grant ADMINISTRATORS: F

  For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. type the following command to replace the file with a known good copy of the file:

  Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

  For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  For more information, see the following articles:

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Let us know the results.