HP C4280: Critical bug in software on the systems of skylake C4200

Hello

I just found a critical bug in your software for HP C4200 series (4.exe - PS_AIO_C4200_NonNet_Full_Win_WW_140_404 or PS_AIO_C4200_NonNet_Full_Win_WW_130_140.exe).

I just bought a new computer with a CPU skylake. Intel has removed USB 1.1 and 2.0 controllers on those systems, and only USB 3.0 is present. When I try to install the HP software, HP C4200 series setup just does not detect USB 2.0 controllers in the system and refuses to install. It is a mistake because the USB 3.0 controller can of course operate in mode 2.0 (and 1.1). Y at - it an option to run the installer to get verification of the 'minimum requirements '? It is a critical bug, I can not install the HP drivers/software in my Windows 7 system.

Thank you and best regards,

Iker.

Hello

Of the installation folder extract HP Open the Setup folder and rename usbready.exe to usbready1.exe.

Next go to a higher level and tun the executable Setup.exe, the installation should now ignore this step.

Shlomi

Tags: HP Printers

Similar Questions

  • color laserjet mfp m177fw pro: for the installation of the software in the system.

    Just bought the printer color hp laserjet pro printer mfp m177fw, obtained recently added in the system, printing normally, no problem with that.

    However, when I tried to install the software (such as the scanner and along other software) from the CD, their appears. He stopped on the first stage, when the status of the installation up to 75% and saying "there are a problem for the software being installed in the system, please restart and try again". I have tried several times, but did not work.

    Then I tried on another computor, it works!

    So why is it? all the solutions for the problem? or I have to change a new operating system?

    Thank you very much for your help!

    Hi @Hayababy,

    I see that you have any problems, install the printer on the computer. I will definitely do my best to help you.

    When do you receive the error, before connecting the USB cable or when connecting it or after?

    Probably something is interfering with the installation. I have provided a few steps to try.

    Perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows.

    Then run the installation.

    If the error is after you have connected the USB cable, please follow these steps:

    Immediately after connecting the USB cable, follow the steps in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue.

    How is the printer connected? (USB, Ethernet, WiFi)

    If you appreciate my efforts, please click on the button below the thumbs up. Thank you.

  • After the removal of malicious software through the system restore, now some applications don't work

    Control Panel... Help and Support... do not work... I get this message on both of these and other:
    Rundll32.exe not found Application...
    When I try to access some also uses Open with open... This has not happened before... I think I lost something that needs to be restored... BTW I tried the system restore to get rid of malware... It worked (obvriously) but only up to a point... Now, some applications do not work...
     
    Thank you
     
    Elaine

    Then when you get your rundll32.exe work, follow these steps:

    Looks like your Windows file associations have to dispose. This means that XP is not
    know what to do with the files by looking at the file extension (for example, .exe for executables,
    .doc for MS documents, etc.).

    If you don't have it you, something done for you - most likely malware.

    Go to this site WWW by Doug Knox:

    http://www.dougknox.com/

    On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

    Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

    Run the following scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

  • Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

    My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

    I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

    I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

    I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

    I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

    Don't know what I can do. Can you help us?

    Original title: Toshiba S955-S5373 will not start

    Hi Annaed,

    Thanks for posting your query in Microsoft Community.

    I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

    Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

    This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

    As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

    Windows crash hard drive - discount - locked, unlock the hard drive

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Satellite T210 problem of speaker sound audio (T210-112) if the system is moved

    * Phone: Satellite *.
    * Model: T210-112 *.
    * Operating system: Windows 7 *.
    Condition: new
    Versions of BIOS/Driver: unknown

    * Symptoms: *.
    * When the phone is picked up, fixed, tilted or moved * in the air during audio playback the * noise reverberates * for a short period until the system is stationary again.
    To describe more in detail, the 'sound-bite' which plays currently gets stuck and repeats several times quickly and then continues to normal playback. Let's say, for example the audio clip plays someone who says the word "toshiba" and pick up the laptop in the middle of it, it comes out as "toshi-i-i-i-i-i-i-i-i-i-i-ba". This has been tested with the internet streaming audio and audio via youtube an installed demonstration program running.

    * Troubleshooting: *.
    -Since it's a new laptop, I returned to the seller and checked if this happened on the view model in the shop. He did, so this seems to be a general problem.
    -J' searched the forum, support pages, google without result.
    -There seems to be no README / info AVAILABLE included with the latest version of the BIOS / Driver downloads from the Toshiba support site that describes known issues.
    -J' looked for related information from REALTEK (I understand that it is an ALC259-based system) but nothing is there.

    * Suspicions: *.
    I think this may be linked to the protection function of the hard disk (?) +, which is supposed to start when he realizes that the laptop may be declining. Perhaps this can be solved through BIOS or driver updates?
    (I have not tried to disable this feature on the system, or update any components that I wanted to return the unmodified system to ensure the refund. I want to buy this system but will not do without a guaranteed solution.)

    I hope you can help!
    Thank you!

    Hello

    Akuma is right.
    This is related to the installed HARD disk protection software.
    If the laptop would be transferred to fast the HARD disk Protection software blocks the head of the HARD drive in order to avoid that the HARD drive against damage. This leads to delays while writing or reading data from the HARD drive.

    It would be possible to remove the software from the system, but this is not recommended, because the software protects the drive HARD and without this software, you HARD drive may be damaged more quickly.

  • Is a necessary additional security, such as McAfee software on the new iMac and iPad?

    Is a necessary additional security, such as McAfee software on the new iMac and iPad?

    Mac users often ask if they should install "anti-virus" (AV) or software "anti-malware". The answer is 'no', but it can give the false impression that there is no threat of what is loosely called 'virus '. There is a threat.

    1. it is a comment on what you should - and should not-do to protect you from malicious software ("malware") that runs on the Internet and gets onto a computer as an unintended consequence of the user's actions.

    It does not apply to the software, such as keyloggers, which can be installed deliberately by an intruder who has convenient access to the computer, or who has been able to take control of it remotely. This threat is in a different category, and there is no easy way to defend against it. AV software is not intended to and does not, to defend against these attacks.

    The comment is long because the issue is complex. The essential points are in articles 5 and 11.

    OS X implements now three levels of integrated protection specifically against malware, not to mention the protections of runtime such as quarantine the file, execute disable, sandbox, protecting the integrity of system, System Library randomization and randomized address space layout , which can also prevent other kinds of exploits.

    2. all versions of Mac OS X 10.6.7 were able to detect the malware Mac known in downloaded files and block non-secure web plugins. This feature is transparent to the user. Apple calls internally it "XProtect."

    The malware used by XProtect recognition database is automatically updated. However, you should not count on it, because the attackers are still at least a day before the defenders.

    The following restrictions apply to XProtect:

    ☞ circumvented by some third-party network software, such as the BitTorrent clients and Java applets.

    ☞ It applies only to software downloaded on the network. Software installed from a CD or other media is not verified.

    As new versions of Mac OS X are available, it is not clear whether Apple will continue indefinitely maintain the older versions such as 10.6 XProtect database. Versions of obsolete systems security may eventually be affected. Updates to security for the code of obsolete systems will be stop being released at any given time, and which can leave them open to other types of attack in addition to malware.

    3. starting with the OS X 10.7.5, there was a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and installation packages downloaded from the network will be run only if they are digitally signed by a developer to a certificate issued by Apple. Certified software in this way has not been checked for safety by Apple, unless it comes to the App Store, but you can be reasonably sure that it has not been changed by someone other than the developer. His identity is known to Apple, so it could be held legally responsible if it distributes malicious software. Which may not mean much if the developer lives in a country with a weak legal system (see below).

    Access controller does not depend on a database of known malware. He has, however, the same limitations as XProtect and in addition the following:

    ☞ It can easily be turned off or overridden by the user.

    ☞ A malware attacker could find a way around it, or could take control of a certificate of signing of code under false pretenses or could simply ignore the consequences of the distribution of malware Tryggvason.

    ☞ Developer App store could find a way around the Apple control, or the control may fail due to human error.

    Apple took too long to revoke some known attackers codesigning certificates, thus diluting the value of the keeper and the program developer ID. These variances do not involve the App Store products, however.

    For the reasons given, App Store, and, to a lesser extent - other applications recognized by signed Gatekeeper, are safer than others, but they cannot be considered to be absolutely sure. "Sand" applications could make to access to private data, such as your contacts, or for access to the network. Think that before granting access. Security sandbox is based on user input. Never click through any application for leave without thinking.

    4. by starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background. He checks and removes, malware that corresponds to a database of recognition held by Apple. To ensure that MRT will be executed when the database is updated, the App Store tab in system preferences and check the box marked

    Install the system data files and security updates

    If it is not already done.

    As XProtect, MRT is effective against known threats, but not against strangers. It alerts you if it detects malware, but otherwise, it has no user interface.

    5. the built-in Mac OS x security features reduce the risk of malware attack, but they are not and will never be complete protection. Malware is a problem of human behavior, not a behavior machine, and none only of technological solution will solve. Software protect you from trust only will make you more vulnerable.

    The best defense is always going to be your own intelligence. Except perhaps feats of Java, all the known malware, circulating on the Internet wearing reached a completely setting installation to update to OS X 10.6 or later takes the form of so-called "Trojans", which may have no effect if the victim is deceived in their execution. The threat thus amounts to a battle of wits between you and cybercriminals. If you are better informed, they think you are, you win. In effect, it means that you always stay in the shelter of practical computing. How do you know when you leave the safe harbor? Here are a few signs warning of danger.

    Software from a reliable source

    ☞ Software with a brand, such as Adobe Flash Player, does not come directly from the Web site. Don't be fooled an alert of any website for updating Flash, or your browser, or other software. A real alert that Flash is outdated and blocked is shown on this support page. In this case, follow the instructions on the support page. Furthermore, assume that the alert is false and that someone is trying to rip you off to install malicious software. If you see these alerts on more than one Web site, ask for instructions.

    ☞ Software any is distributed via BitTorrent or Usenet, or on a Web site that distributes pirated music and movies.

    ☞ Rogue sites Web such as CNET Download MacUpdate, Soft32, Softonic and SourceForge distribute free applications that have been packaged in a superfluous "install".

    ☞ The software is advertised through spam or intrusive web ads. Any announcement, on any site, which includes a direct link to a download should be ignored.

    Software that is clearly illegal or doing something illegal

    Commercial software ☞ high-end such as Photoshop is "cracked" or "free."

    ☞ An application helps you violates copyright law, for example to circumvent the copy protection on a commercial software, or streamed media recording to be reused without permission. All the 'YouTube downloaders' are in this category, but not all are necessarily malicious.

    Conditional or unsolicited offer from strangers

    ☞ A phone calling or a web page you indicates that you have a "virus" and offers to remove. (Some reputable sites warned visitors who have been infected with the malware "DNSChanger" legitimately. The exception to this rule applies.)

    ☞ A web site offers a free content like music or video, but for use, you must install a "codec", 'plug-in', 'player' 'Downloader', 'extractor', or 'certificate' which comes from the same site, or a stranger.

    ☞ You win a prize in a competition that you are never entered.

    ☞ someone on a forum like this is eager to help you, but only if you download an application of your choice.

    ☞ a 'FREE WI - FI!' network presents itself in a public place like an airport, but is not provided by management.

    ☞ Online everything that you expect to pay is 'free '.

    Unexpected events

    ☞ a file is downloaded automatically when you visit a web page, without any further action on your part. delete any file without opening it.

    ☞ You open what you think, it is a document and you receive an alert that it is "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you must always remove any download that is not what you expected it to be.

    ☞ An application does something you don't expect, such as permission to access your contacts, your location or the Internet without obvious reason.

    ☞ Software is attached to the email you na not ask, even if it is (or seems to come) by a person of trust.

    I do not leave the safe harbour that once will necessarily lead to disasters, but make a habit of it will weaken your defenses against malicious software attacks. None of the above scenarios must, at the very least, make you uncomfortable.

    6. Java on the Web (not to be confused with JavaScript, to which it is not related, despite the similarity of names) is a weak point in the security of any system. Java is, among other things, a platform to run complex applications in a web page. That was always a bad idea, and Java developers have proved unable to apply it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been a type virus Windows affecting OS X. simply load a page with Java malicious content could be harmful.

    Fortunately, client-side Java on the Web is outdated and largely disappeared. Only a few outdated sites still use it. Try to accelerate the process of extinction by avoiding these sites, if you have a choice. Forget to play games or other uses not Java essentials.

    Java is not included in OS X 10.7 and later versions. Discrete Java installers are distributed by Apple and Oracle (the developer of Java). Do not use one unless you need it. Most of the people don't. If Java is installed, turn it off- not the JavaScript in your browser.

    Whatever the version, experience has shown that Java on the Web is not reliable. If you must use a Java applet for a job on a specific site, Enable Java only for the site in Safari. Never activate Java for a public Web site that carries the third-party advertising. Use only on websites that are well known, protected by login and secure without ads. In Safari 6 or later, you will see a padlock icon in the address bar when you visit a secure site.

    7. another perennial weak point is Adobe Flash Player. Like Java, Flash is declining well deserved, but content Flash is still much more widespread than the contents of Java on the Web. If you choose to install the Flash plugin, you can reduce your exposure to Flash by checking the box marked

    Stop the plug-ins to save energy

    in the Advanced tab of the preferences of Safari window, if not already done. Consider also installing an extension Safari as "ClickToFlash" or "ClickToPlugin." They will prevent the Flash content automatically load and are initially not Flash video is substituted for Flash on YouTube and perhaps a few other sites. I tested the extensions and found them safe, but you should always do your own research before you decide whether to trust any third party software.

    8. remain within the sphere of security, and you will be as safe from malware you can be practically. The rest of this comment is what you must do to protect you.

    Never install any AV or products 'Internet security' for Mac if you have a choice, because they are all worse than useless. If you are required by a (wrong) institutional policy to install some kind of AV, choose one of the free apps in the Mac App Store, nothing else.

    Why you should not use products AV?

    ☞ To recognize malware, software depends on a database of known threats, which is always at least one day to day. This technique is a proven failure, as a major supplier of AV software has admitted. Most of the attacks are "zero-day" - that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry comes to realize that the traditional AV software is worthless.

    ☞ design is based generally on the nonexistent threat that malware can be injected at any time, anywhere in the file system. Malware is downloaded from the network; He is not of the blue leaves. To meet this threat does not exist, a commercial AV software changes or low level functions of the operating system, which is a waste of resources and a frequent cause of instability, bugs, poor performance, and duplicates.

    ☞ changing the operating system, the software can also create weaknessesthat could be exploited by malicious attackers.

    ☞ especially, a false sense of security is dangerous. This fact relates to all AV software it will never be any changes elsewhere.

    9. a free AV product from the Mac App Store is safe as long as you don't let it delete or move files. Ignore all the warnings that it can give you on "heuristic" or "phishing." These warnings, if they are not simply false positives, see the text of e-mail messages or updates cached web pages, not malware.

    An AV application is not necessary and may not be invoked for protection against malware for OS X. It is useful, or even not at all, only to detect malware Windows and even for this use it is not really effective, because the new Windows malware makes its appearance much faster than OS X malware.

    Windows malware cannot hurt you directly (unless, of course, you use Windows). Just do not pass to someone else. A malicious link in the e-mail is usually easy to recognize by the name alone. A concrete example:

         London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe

    You don't need software to tell you it's a horse Trojan for Windows. Software may be able to tell what trojan is, but who cares? In practice, there is no reason to use a recognition software, unless an organizational strategy requires. Malware Windows is so widespread that you must assume that it is in each attachment until proof to the contrary. Nevertheless, a free AV product on the App Store can serve a purpose if it fulfills a misinformed network administrator that says you must have some sort of application AV. An App Store product will not change the operating system; in fact, it does nothing, unless you run it.

    If you are just curious to know if a file is considered malware by the AV engines, you can download it from the "VirusTotal" site, where it will be tested against most of them without charge. A negative result is evidence of what whether, for the reasons given above. I do not recommend doing this with a file that may contain private information.

    10. There seems to be a common belief that the firewall Application acts as a barrier to infection, or prevents operation of malware. He does not. It blocks incoming connections to some network services you are using, such as file sharing. It is disabled by default, and you should leave it like that if you're behind a router on a private home or office network. Activate only when you are on an untrusted network, for example a public Wi - Fi hotspot, where you do not want to provide services. Disable services that you don't use in the sharing preferences window. All are disabled by default.

    11. as a Mac user, you don't have to live in fear that your computer may be infected whenever you install the software, read emails, or visit a web page. But nor can you assume that you will always be free from exploitation, no matter what you do. Internet browsing, it's like walking the streets of a big city. It can be as safe or as dangerous that you choose to do so. The greatest harm done by software AV is precisely its selling point: it makes people feel safe. They can then feel sufficiently safe to take risks, which the software does not protect them. Nothing can reduce the need for safe computing practices.

  • Features of Installation of Windows 7 software service stops responding when the system configuration

    I noticed that Windows 7 RTM (all versions, x 86 / x 64) has a bug on its features to Software Installation service which causes updates Windows hang during setup of the system (i.e. Windows is stuck on the message "preparing to configure Windows - do not turn off your computer"). M$ suggests to perform a repair with system restore or re - install the operating system from scratch, but is not an effective solution.

    Given that Microsoft has published 5 updates for setup of functionality of software on Vista, I wonder why they don't release a similar patch for Windows 7?

    I opened a support to report the problem incident, which probably occurs after installationreliability KB974431 update(Windows6 1 - KB974431 - x 64.msu).

    When Windows Update installing KB974431 update , the following error message appear when Windows configures updates after the system restarts and the installation of the update fails with error code ofC004F050 .
    Above the error due to the Windows operating system can not pass genuineWindows validation (WGA) . installation of KB974431 will fail if validation fails, or returns a status not valid or not genuine. Here is the procedure to fix it:

    1. click on Start .
    2. in the run box, type cmd and press ENTER.
    3. you will see the black command prompt window.
    4. enter sfc/scannow
    5. If this disable the grace period, it is reset using this code: slmgr /rearm
    6. restart your computer.
    7. try to update again.

    Hope this solution helps!

  • Microsoft Antivirus found the activity of critical processes on your PC, you need to clean your computer to avoid the breakdown of the system.

    Message from Web page

    Microsoft Antivirus found the activity of critical processes on your PC, you need to clean your computer to avoid the breakdown of the system.

    Hi Michael

    FWIW, I just see the same message a couple of days, but I remember reading somewhere that some of these messages was an attempt of sites to infestation by malicious software to cause the user to go into panic mode and accept the offer to clean their computer and when you do that, you're actually infect your system ,

    I tried to return to the site, near the site but nothing worked so I did a stop forced and rebooted with no ill effects.

    When restarting my system, I did a full scan and nothing was found.

    Found the article.

    http://www.Microsoft.com/security/PC-security/antivirus-rogue.aspx

    Good luck

  • 10 iOS came out today, but why isn't she displayed in my 'update software' in the settings. ?

    10 iOS update came out today, but it does not appear in my "update software" in the settings, what do I do? or how long will it take to show?

    That may depend on the country in which you reside.   As AFAIK, new OSs are generally released according to the marketing of policies in one country or another, not at the same time global. I can't detect what country you are.

  • Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

    Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

    N °

    (143905)

  • There was a problem downloading the software for the iPhone error - 39

    My iPhone 4S device is disabled, connect to iTunes, when I was connected to the laptop cannot restore and give this massage:

    There was a problem downloading the software for the iPhone "iPhone". An unknown error occurred (-39).

    Make sure that your network settings are correct and your network connection is active. or try again later.

    Hi mgdabko!

    I see that you get an error message when you try to connect your iPhone to iTunes.  I know it's important to have your iPhone works properly, and I'm happy to provide assistance.  39 error often indicates there is a problem with the internet connection you are using, so you should try another Internet if possible.  You can also try all the advice in the following article:

    If you see an error when you update or restore your iPhone, iPad, or iPod

    Thank you for using communities of Apple Support.

    See you soon!

  • DeskJet 3632: Installing the software with the IPad

    Hi all, I just bought a deskjet 3632, I do not have a PC or laptop, so I can't install the software on the disk.

    I have an iPad,

    Please could you guide me through the steps of the installation (if possible) I've done a major boo boo, I bought the HP1512, not even give it a second thought that it would not be wireless.

    Thanks in advance

    Kee

    Hi kee,.

    Download and use the HP AiO Printer application to set up your printer on your wireless network If you have router:

    http://support.HP.com/RS-en/document/c03561640

    Open the app and click Add a new printer, and then follow the instructions on the screen.

    Note: f you can't find the name of the printer with the "setup" from the list of WiFi from your iPad, reset the printer settings by pressing on and now the buttons cancel and wireless on your printer for 3 seconds, then turn on the printer and make sure the WiFi switch on the printer flashes, otherwise press the WiFi button, and it starts flashing.

    Then follow the steps in the article to print and scan, so you can use AirPrint to print from your iPad:

    http://support.HP.com/us-en/document/c02623193

    If you have a router, connect directly to the printer using WiFi Direct, as shown below:

    http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-4510-e-all-in-one-printer-series/5285997/model/5383027/document/c04090221/

    If you need to find the WiFi Direct password, press the Information (i) and the WiFi Direct () buttons to print a sheet with WiFi Direct name and the password, the same steps apply to print using AirPrint and scan using HP AIO remote.

    Kind regards

    Shlomi

  • Re-install the HP software on the new installation of Windows 8

    HI -.

    When I upgraded my computer to Windows 7 to Windows 8 Preview of consumer he kept all the settings and the HP programs. Last night I upgraded Windows 8 for the preview of exit and he forced a clean install.

    Where can I get the HP recovery program that allows me to re - install the HP programs? I can't find the software on the HP site. I did the media before doing the upgrade, and I still have the recovery partition on my computer. I can't find that consumables HP recovery program that links to the recovery partition...

    Hello

    I suggest that restore you your system using the recovery Partition (by pressing F11 at startup) or recovery media that you created.  Select the system recovery that will repair your system to orginal factory State.  From there, you can go to Win 8 Preview Release.  I think that upgrade to win 8 to another Win 8 version may require clean install and hoping that this is not the same case when you switch from Win 7 to 8 Win.  Good luck.

    help88 (an employee of long date HP)

    NOTE: If this helps you or your problem - please say thank you by clicking on the star of white laurels on the left.

    If you think that this would also help others, please check "accept as Solution" to help find it easier

  • Update drivers and software on the Satelite P750-10 q

    Hello
    I bought Satelite P750-10 q.
    Œuvres laptop slow in my opinion. I wanted to update all the drivers for your laptop, but I have not found a software that can automatically check the system drivers.
    And question: how to check updates?

    xadamus

    Hey,.

    > Laptop works slowly in my opinion. I wanted to update all the drivers for your laptop
    If the laptop is slow, new drivers will not help you. Updates driver don t increase performance, it s introduce just fixing, support of new products, etc., but not more.
    Besides, P750 is brand new model so I think that the latest drivers are already installed.

    > How to check updates?
    Either you do it yourself on the official website of Toshiba or use the preinstalled Toshiba TEMPRO.

    Another point about the slow speed:
    Of course, this can have different reasons and without going through your laptop in front of me I can only speculate on the reason for the possibility.
    But it s always advisable to check the start up programs. This can be done in msconfig > Startup tab. You can find a list of all the programs, they start with windows too. Some programs such as Support Button Toshiba cards Flash, etc. are necessary (in this case for the FN keys) but other programs such as Adobe Reader, Microsoft Office, Skype, ICQ, Java AutoUpdate, Toshiba zooming Utility, etc. can be disabled (unchecked). This will improve the performance of many. Windows starts and runs faster RAM of the freer and less HARD drive activity.

    Also defragment the HARD drive at any time and check the installed software. You can remove the evaluation version and other things that you no longer need.

    I hope that helps! :)

  • Satellite A660 - question of recovery of the system and Windows software

    Hi all

    I recently bought a new Toshiba laptop and created a set of disks for backup use Toshiba Recovery media creator.
    Now, this laptop is proved to be defective and was exchanged by another.
    There was a slight difference in the software, what the faulty version was preloaded Office 2010 starter and the new Office 2007 trial 60 busy days.

    As I have already created backup discs of the defective model (i.e. same spec/model number) can just recover the system using the device backup discs?

    The reason why I want to do is that I prefer the Office 2010 Starter version (as opposed to the trial version). Software recovery disks that you create on this computer in particular connected serial number is or can I use them on the new machine to replace the identical specifications?

    Thank you

    Generally you can use it if the two laptops have the same part number (model number PAxxxx).

    Before that, you create an original DVD for the machine, you now have. If something goes wrong, you can use the original disc.

Maybe you are looking for