HP cddvdw ts-h653r ata device driver error
I can access is no longer my DVD player. Looking at the Device Manager, it says there is a problem, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). Where can I find the device driver for this drive?
Hello
Please use this:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Kind regards.
Tags: Notebooks
Similar Questions
-
HP Pavilion dv4
TSST Corp CDDVDW TS-L633L ATA DeviceControl Panel / problem report and solutions
Problem: Could not load software driver status: sent reportDescription
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.Signature of the problem
Problem event name: PnPDeviceProblemCode
Architecture: x 64
Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
The PnP problem code: 00000013
Driver name: cdrom.sys
Driver version: 6.0.6002.18005
Driver date: 11/04/2009
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033Additional information about the problem
Bucket ID: 619663520Control Panel / Device Manager
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.I tried:
Update driver software
Uninstall / find the hardware changes
Uninstall / reboot / new hardware found
Properties / verification solutionsHow can I fix it?
Hello
Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.
http://support.Microsoft.com/kb/982116
You have to restart the laptop after that.
Kind regards
DP - K
-
HP G60-535DX Notebook PC CDDVDW TS-L633M ATA Device
I have a HP G60-535DX laptop and Norton has found a corrupt driver: CDDVDW TS - L633M ATA Device. I uninstalled and tried to find an answer here on HP.COM, but fails. How can I get a new driver?
Hello:
Please read the info at the link below.
One of the steps in resolution 2-5 should work for you.
-
Reinstall for TSST corp CDDVDW TS - L633B ATA device
I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.
I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.
Here is the solution to update your device with the latest driver of Toshiba/Samsung.
Introductory material.
1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.
2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.
3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.
4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.
Instructions.
IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.
1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html
2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html
The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.
3 download the Flash Samsung Standalone utility:
http://www.samsungodd.com/KorLib/file/tsdnwin.exe
4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE
Download source: http://ala42.cdfreaks.com/MCSE/
5 create a folder and name it FLASH and place the following 3 items in the folder.
SN - S083B_SB02.bin that you have checked out
Flashing Samsung Standalone utility
MCSE of Ala42 you have downloaded and extracted the zip file
6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.
7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.
8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.
9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.
10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.
11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.
12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.
13 after hitting the button enter, the command prompt should read FLASH.
14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.
15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.
16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.
Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.
When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.
When it finishes installing your drivers, restart the computer once more, and then you're done.
NOW ENJOY your CD/DVD-RW drive updated.
-
The fatal limit TSSTcorp CDDVDW TS - H653Z ATA Device
I just hit the limit of CHANGE of REGION in the TSSTcorp CDDVDW TS-H653Z ATA Device. Impossible to change the limit over 4 times and the DVD DRIVE BECOMES USELESS? Integers HP Slimline is worthless to me. I can save the day somehow? Thank you.
Try to reload the firmware.
All PC DVD/CD drives have a max of 5 region code change. You may be able to find a piece of software that will bypass this restriction.
-
HL-DT-ST DVDRAM GSA - T40N ATA Device Driver is not recognized
Hi, I have an Acer Aspire 5920 and the HL-DT-ST DVDRAM GSA-T40N ATA device driver is not recognized. I've uninstalled and restarted, without success. I don't want to pay for a product fix cela, but can't find anything that I have confidence on the net - can anyone help please?
Hello
Try this:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
See also: http://support.microsoft.com/kb/929461
-
PILOT DELIMMA! I have a TSST corp CCA/DVD TS-L462D ATA device driver & get code 19
Original title: DRIVER DELIMMA! I have a TSST corp CCA/DVD TS-L462D ATA device driver & receive code 19, I tried all HELP!
Please see above, how can I fix code 19? Thank you!
Hello
I suggest you run the fixit from this link and if it helps:
http://support.Microsoft.com/kb/314060
Check if that helps.
-
CDDVD TSST CORP TS-L633M ATA DEVICE DRIVER DOES NOT
OK so I went on the website of windows (http://support.microsoft.com/gp/cd_dvd_drive_problems) and downloaded and ran the program that makes it surprisingly found the problem and tried to fix it but in doing so, I got a message from PILOT of FACILITIES of SOFTWARE developed in the taskbar that says that it not to repair the failing TSST CORP CDDVD TS - L633M ATA DEVICE driver. So now that it is said "Please consult the manufacturer of your device for help to get this installed device." who should I contact?
-J' have a HP PAVILION DV6 121 6SA
Hi Woody94,
TSST CORP stands for Toshiba Samsung Storage Technology Corporation. This pagehttp://www.tsst.co.kr/korea/en/techinfo/svccenter.php gives a map of service centers around the world. You will probably find an email from support by placing the center of service to you.
If not, have you contacted HP support to see if they can help? http://WWW8.HP.com/UK/en/contact-HP/contact.html This link is to HP support to the United Kingdom. If you are in another country, just visithttp://www.hp.com and check the support pages or contact pages. You can also consult the user's guide for your PC to see if support details are included here.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org; Web: http://www.silversurfer-guide.com
-
portable device driver error - code 31
Gidday everyone,.
Rig = AMD Athlon II x 4 620 clocked at 2.6 ghz, 2 GB Ram, Win 7 Ultimate 32 bit SP 1 on Asus M4A78
bios mod-
config sys: ide to ahci (to improve the rate of the ISF, NCQ; using sata, ide, no raid)
reset for win 7
blue screen
back to ide
reset
www for solution - registry mod help:
KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci
CHG of DWORD from 3 to 0
reboot ok for Win 7
improve the exchange of data
started victory day
installed optional AMD - other materials, Storage Controller - AMD SATA controller,
published March 2013
Update said "with success."
Reboot as required by the update
Device driver error 31 on portable devices
(Two) WPD filesystem Volume driver
:-(
Active BIOS, no change
reset
BIOS - return to the ide
Restart
no change, still error 31
Restored AMD update
error 31 remains
hands up in the air
NB. earlier this year the experience even device driver error 31 on portable devices on portable devices for WPD filesystem Volume driver. Investigations at the time found no solution. However, think has an update of the applied victory since then "arranged" the error. The error was not apparent immediately before the update to AMD.
Grateful for the help please.
Have '
Hello
Thanks for posting your query in Microsoft Community.
I understand your concern and will help you solve this problem.
I suggest you try using the steps described in these Microsoft help articles and check if it helps.
What to do when a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctlyRestore a driver with its previous version
http://Windows.Microsoft.com/en-us/Windows/restore-driver-previous-version#1TC=Windows-7I hope this helps. If the issue is not resolved, please get back to us and we would be happy to help you.
-
Digital Studio & Crafts - Video adapter device driver error
Hello
can someone help me solve a problem with my laptop - I'm trying to load software for Fisher Price toy for my 5 year old and get the error message
"the video card device driver is not properly installed or is not compatible. Installation will end today. Please try another computer or relations with the Fisher Price customer".
I tried this and they just returned the cd to new but get the same message.
I tried to update the Toshiba web site files, but nothing works... :-(
Hmm This application is not known to me and I don t know what it does, but the message mentions something on the video card device driver.
Maybe you need to update the graphics driver? :|
I met a few similar problems, while the installation of some games and the newest game is necessary a new graphics driver.In most cases, contributed to the update!
-
Acer HL-DT-ST DVDRAM GSA-T40N ATA Device Driver installation failed
OK, so my CD and DVD player has not worked for about 9 months (I'm a student, so I had a hard time trying to find the time to fix it.) I tried the Microsoft Fix - It application for CD/DVD issues, and he said that my driver has not been installed correctly. Vista could cause this, or is it the fault of the company of my computer? Is it possible to fix it without taking a store on my computer? Thank you for taking the time to look at my questions.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
WSD Print device driver error prevents the standby machine
Hi all. I've been struggling with this problem for a few months, without success. On my system: Dell PC, Vista 32, SP2, using a Brother MFC 490 all-in-one that is connected to my wireless network.
My problem is the following: a few months ago I noticed that the Bureau has refused to go to sleep, instead showing a popup that says, "the device driver for the WSD print device prevents the standby machine." It's embarrassing at the very least, a waste of money and the system of life at worst.
I tried the following without success: restored the system to a point before the show, updated the wsd, uninstalled/reinstalled the wsd driver driver & peripheral, uninstalled the Brother software (the printer has remained on the system, thanks to the auto detection) and banged my head with great enthusiasm on the keyboard.
If all goes well, there is a relatively easy fix! Thanks for your suggestions...
Hello DFontanella,
The error message indicates that there is a problem with the driver and preventing the computer to go to sleep.
I suggest you uninstall the drivers for the device. Disconnect the connected device and try to load the generic drivers of the printer in the back.
Also try to restore the driver from Device Manager:
To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.
1. open Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.
2 right-click the device for which the previous version of the driver is desired and then click Properties.
3. click on the tab drivers.
4. click on Roll Back Driver.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
Satellite A200 - TSST corp CDDVDW TS - L632H ATA Device no work
I'm not the most computer savvy person so I need a little help.
The device status says:
+ This device cannot start. (Code 10) +.It also tells me click + "search for solutions ' +. When I do a pop up appears and says that Windows does not load driver software.
Any help is appreciated.
In addition, under Vista.Thank you
LucasThis can occur when you install the CD/DVD software not designed for Vista. For example if you install iTunes v6 for XP, it can load a filter incompatible Vista driver and cause problems.
Try to remove the UpperFilters and Lowerfilters. Sollow this guide: http://support.microsoft.com/default.aspx?id=314060
-
TSST Corp CDDVDW TS-L633M ATA Device
My cd/dvd-rom does not work! I did all the patches... uninstall it from the Device Manager and restart the computer; delete upper/lower case filters in the registry. Update device drivers; computer brought to the factory settings; Restore at a better time; Reinstall the software; etc, etc, etc! So, in properties, it says my file system is unknown, but in the State of the device it says that my device working properly in my HP Advisor it says my drive (E :) is empty bay... it wont read/write/open/discovery/or do something... Please help will stir crazy!)
Oh yes, I have Windows Vista and you have not updated my operating system or whatever it is, the last time it worked was two months ago. THANKS :)
Hello
· You are using a desktop computer or a laptop?
The issue that you are facing may occur due to the static energy storage in the computer. I suggest a system power cycle and check if it helps:
1. disconnect any external devices to the laptop.
2 remove the battery from the laptop.
3. press the power button of the laptop for 10-15 seconds.
4. Insert the battery in the laptop and restart the computer.
5. check if the DVD player works fine.
-
I have a number of questions at the moment and wonder if they are related between them and how to fix each one.
1. I have sometimes received error: 0xC004D401 "an unauthorized change was made to windows" that force restart the laptop, then the same error comes up and force reboots and this loop until I force shutdown.2. I constantly get the message "host process for Services Windows has stopped working and was closed... ».3 - My Device Manager displays many symbols yellow exclamation point of 'error' of the brand that are appearing next to "Network adapters", Microsoft 6to4 adapt #13; Map Microsoft 6to4 #14; Map Microsoft 6to4 #3; Map Microsoft ISATAP #13; Microsoft ISATAP # 17 and card Microsoft ISATAP #18. I tried to "Update" of these device managers and looking for changes, but he keeps saying that everything is up to date...It's really frustrating because it affects my internet connection (wireless usb modem) and also the proper functioning of my laptop. At this point I could not even access my photo albums and document records they were no where!. My laptop is an Hp and everything just 2 years now and runs on Windows Vista.This type of error is often related to incompatible software. If this happened recently, you could try a system restore to an earlier time. Vista is up-to-date service pack?
System Restore:
Start > type 'restore' > search for system restore and choose a date. You can also check the programmes concerned.
Maybe you are looking for
-
I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze. It is said about '2 hours and 7 minutes' since last night. What can I do?
-
Pavilion 500-214: IDT audio 92HD73E
I recently updated my audio drivers and now I see a red x next to the "speaker" icon. As if she was silent. I can still hear sounds in my helmet which is plugged into the sockets of the façade. The helmet of communication is defined as default playba
-
New video card, power supply upgrade
Currently I have the Hp Pavilion p6754yand I recently GeForce GTX 560 it to upgrade my current video settings, so I can play my games in more graphically the parameters. Sometimes, however, computers would be turned off randomly, and I came to the co
-
Bike G - what version should I
Hi all Am a new user of the G and I was wondering how do I know if I have a 2nd generation or? Thank you EDIT - title edited for clarity - Alphadog
-
What is the largest hd I can add to a dv7 3007tx?
I have a HP Pavilion DV7 - 3007TX 17 "laptop and it has 2 x 500 GB HD. When I bought the laptop, that was a lot, but now I wouldn't mind a little more place... or a lot more room. I'd love to upgrade the non-system with a larger drive.I just install