HP color laser jet cm1312 mfp sharing does not work

Similar Questions

• HP Color LaserJet 2840 MFP Pr: I've upgraded to Windows 10 now the scanner on my HP Color LaserJet 2840 printer MFP printer does not work

  I upgraded to Windows 10, when I tried to use my scanner, I get the message - the printer does not see the PC.   Is there a way to get around this?

  Hello

  First of all, remember to install the communication driver USB LaserJet of HP (DOT4) below:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=445197&swLangOid=8&swEnvOid=4192

  Know that basic scanning capabilities only are offered through Windows Fax and Scan and only via a USB connection, not the network:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03501661

• Color Laser Jet CM1312 MFP: Is there a driver that allows me to use all the functions on this printer, including scanning

  I can only do this printer print base, I can't scan or adjusted for black and white only, etc., is there a driver that works for this?

  Dear blackmoreashley,

  There is unfortunately no HP software for this model:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03800910

  I hope you find it useful.
  
  Greetings.
  
  * I am not an employee of HP, my work is voluntary.
  
  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• HP COLOR LASER JET CM1312 MFP: Print cartridge problems

  I loaded two cartridges with success, but with the third (CB541A - Cyan) I get the 'delete the shipping in the Cyan cartridge latch '. It IS deleted. I put the old cartridge and no problems, I tried again with the new and the same message appears. I tried to turn off the machine with the new cartridge in but nothing works.

  What should do?

  But not sure since the old one works, sounds like a faulty new cartridge. Consider a replacement.

• Laser jet 1018 HP printer does not

  Original title: Laser jet 1018 HP printer does not

  I have a Laser jet HP 1018 and lost the disc printer if I can get any computer to be able to communicate with him. I downloaded the software that I thought I was able to run the printer, but nothing works. What else can I do to get the two to talk so I can print?

  Hello

  ·         You get the error message?

  ·         Did you install the printer without any problem drivers?

  ·         Were there recent changes made on the computer before the show?

  Step 1:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Step 2:

  Try to remove old drivers and reinstall the most recent drivers from the HP website and check if it helps.

   

  Add or remove a printer

   

  Find and install printer drivers

  HP LaserJet 1018 printer support site about the installation, see also:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1814094&LC=en&cc=us&DLC=en&lang=en&cc=us

• photo sharing does not work as it should in the Sierra of the BONE

  I took 11 pictures yesterday, and I want to share only 3 of them. I highlight the 3 photos, click on sharing of arrow, and pictures of 11 highlighted.

  Are your 11 photos recently imported into an album, and id you select in an albumen?

  There has been some reports, selection of photos to change the batch does not work well, when photos were selected anywhere, but in the tab 'Photos' smuggled to the full album can be selected, even if not all photos are highlighted.

  Try, if you can select the photos in a moment to share your photos select only.

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• VMWare Tools shared folder code does not compile on VMWare Fusion 7, Ubuntu asked 14.10, and Clipboard sharing does not work.

  Hello

  After the upgrade to a guest of 14.04 to 14.10 Ubuntu, I tried to reinstall the VMWare tools.  The problems I've come across so far:

  Shared folder code will not compile.  I get the following result:

  do: enter the directory "/ tmp/modconfig-ElOCTG/vmhgfs-only.

  Using the kernel build system.

  / usr/bin/make /lib/modules/3.16.0-23-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.16.0-23-generic'

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/message.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/dir.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/request.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsUtil.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/cpName.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/rpcout.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/stubs.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsEscape.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/link.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/transport.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/module.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/file.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/super.o

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioRead ':

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c:714:4: error: implicit declaration of function 'generic_file_aio_read' [-Werror-implicit-function-declaration =]

  result = generic_file_aio_read (iocb, iov, numSegs, offset);

  ^

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioWrite ':

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c:786:4: error: implicit declaration of function 'generic_file_aio_write' [-Werror-implicit-function-declaration =]

  result = generic_file_aio_write (iocb, iov, numSegs, offset);

  ^

  Cc1: some warnings are treated as errors

  scripts / Makefile.build:257: recipe for target ' / tmp/modconfig-ElOCTG/vmhgfs-only/file.o' failed

  make [2]: * [/ tmp/modconfig-ElOCTG/vmhgfs-only/file.o] error 1

  make [2]: * waiting unfinished...

  Makefile:1345: recipe for target ' _module_/tmp/modconfig ElOCTG/vmhgfs-only' failed

  make [1]: * [_module_/tmp/modconfig ElOCTG/vmhgfs-only] error 2

  make [1]: leaving directory ' / usr/src/linux-headers-3.16.0-23-generic'

  Makefile:120: doesn't have a recipe for target 'vmhgfs.ko '.

  make: * [vmhgfs.ko] error 2

  make: leaving directory ' / tmp/modconfig-ElOCTG/vmhgfs-only.

  The filesystem (vmhgfs module) driver is used only for the shared folder

  feature. The rest of the software provided by VMware Tools is designed to work

  regardless of this function.

  If you want the shared folders feature, you can install the driver of

  running vmware-config - tools.pl again after making sure that gcc, binutils, make

  and your kernel sources are installed on your computer.

  These packages are available on the installation of your distribution CD.

  [Press the Enter key to continue]

  In addition, the shared clipboard does not work.

  I'm under VMWare 7.0.0 on OS X 10.10.

  Any help or advice will be greatly appreciated.

  
  Thank you

  Jonathan Morgan

  The VMWare Tools included with fusion 7.0.1 solved this problem for me (and without any serious regressions I noticed so far, at least, which is nice but not something I intend on with vmware), so probably the next update of each VMware product should include the updated tools.  Don't know how long updates to other products are coming, however.  Wonder if there is a separate place to get just the tools to day?

• VMWare Fusion 6.0.2: Mavericks - Windows 7 Clipboard sharing does not work

  I'm running a MBP, OS X 10.9.2 (Mavericks), VMWare Fusion 6.0.2 with a Windows 7 VM. The elements copied to the Clipboard in one are not properly shared with the other. I went in every parameter I know to try to solve this problem, no dice.

  All known solutions?

  Brad

  Hi Brad,

  1. click on the menu Virtual Machine-> settings, then click on the button of isolation in the Panel settings, Pls, make sure that the two check box (enable D & D, caillet &) and checked.

  2. If the boxes are check, have you already tried to install VMware tools by clicking on the Virtual Machines menu-> reinstall VMware Tools? Can drag you a file from the Mavericks to the Windows 7 VM? No sharing of Clipboard does not work when Windows 7 has just started and no other application does?

• HP Color Laser Jet CM2320n MFP

  Y at - it an app for my iPad that would allow me to send printing to this printer from my iPad? I had an ePrint application but learned that it was only to wireless printers, and allows the CM2320 for network printing, but not wireless.

  Sorry this printer does not have wireless and e-print function. To send the job through your ipad requires service e-print and not necessarily wireless enabled printer.

  Click on the star of congratulations if it was useful. Thank you!

  (Although I am an employee of HP, I speak for myself and not for the HP)

• Lexmark X 5650 works very well with Windows 7 Home-64, now, color and size of the pages does not work. The ink is OK. Can't find the solution anywhere! I tried Mr. Fixit... Nothing helps

  Have Windows 7 home - 64. Been using Lexmark X 5650 printer successfully several times. Now only print black and white photos.  Also a part of any page I want to copy will be printed, only in B & W.  Sizes does not correctly... and a lot of ink color & black.  Tried all the suggestion of Mr. Fixit, nothing helps.  Help please!

  Did you upgrade or install something before this product?

  How Lexmark support/help/FAQ to say?

• Color Laser Jet M277dw MFP: Print quality

  Just got this new printer today.  Already, I'm sorry that I bought.  Too complicated to implement.  It replaced an Epson Office Jet which was VERY user friendly.  Support staff is fairly dismissive.

  I tried to print a greeting card with a colored background and white printing.  It print out okay, but the impression was black and unreadable.

  Any ideas?

  Just consider return it for a refund and buy something else.

• Laser Jet 4500N disconnection and does not print

  I got a cable (mini centronics USB) to connect the printer to my mac OS x 10.9.5 via USB. This is my first time the printer connected.  I recognized the printer and installed. He has not been able to print an entire page.  When I select printer and print it Say "Sending data to Printer".  The window will then say "the printer is not connected.  Then I can unplug the usb on the printer and plug it in again and it will print some of the page. (it seems that it prints better if its only text and no image or ink.)  Sometimes, I have to uninstall the printer and install again.

  The pilot is a 19.8 for the printer?

  It is printing only about 10% of a page.

  It says at the top. Any idea here?

  ERROR: UNDEFINED
  OFFENDING COMMAND: @7NLD
  BATTERY:
  -DICTIONARY-

  As I print multiple pages the Offending command: changes. Here's more

  OFFENDING COMMAND: 6WjhI, T
  OFFENDING COMMAND: =:? E
  OFFENDING COMMAND: QN! QQ.c #RS',

  Any ideas? Thank you very much!

  @Marketqr

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• When I open a program, I see flashing colors around the window. This does not work in safe mode.

  Hi, I have Windows 7 running on a new 4330 s HP's ProBook. I find when I open a window envelope program flashes of clear color. When the computer has started in safe mode the flashing stops. When we run the Task Manager and look under the processes tab, I see that the file named ReStart.exe is disappear and reappear when I try and stop the process, I get a message window titled terminate treatment impossible and the message in the window's "the operation could not be performed. Access is denied. Can anyone help that when the window is flashing the program will not respond to mouse clicks and keyboard entry. I ran virus with Trend Microsystems and AVG free version checks, but I still have this problem.

  original title: FLASHING WINDOWS

  Hi Guyz,

  I hv a system HP 4530 s, I installed fresh windows 7 Home Premium and after installing the drivers I had "Restart.exe"problem." IE blinking of windows. I uninstalled the "HP internet sharing ' program and the problem solved.» Try this. Thanx

• HP P2055dn Laser printer. Firmware update does not work.

  HP P2055dn Laser printer. Win 7-64. USB is connected. Download the appropriate firmware update, ljp2055dn_FW_Update_20120131.exe. Running the file. Select the printer in the dialog box. Printer has been powered up and ready. Bar showed progress update was sent to the printer and concluded successfully, with a smiling face in the dialog box. However, printer doesn't react at all, just keep to indicate loan. When the Self Test / Configuration page, it always shows firmware like 20111214.

  Printer works fine. The update is supposed to fix a security hole.

  Found the answer on the support page for businesses. Buried in the Menu of configuration, to the terms of Service, the last menu item is RFU. This determines if the firmware can be updated. The default value is OFF and LOCKED. It must be put on updating the firmware. After update, it will automatically return to CLOSED and LOCKED.

  It would have been nice if HP put it in the manual, rather than trying to pay $35 for the support of something that should have been documented. Must be a secret or maybe I'm the only person who didn't know what that meant the RFU.