HP color laserjet 2605dn printer

Similar Questions

• Color LaserJet 2605dn printing black and white only

  I have a Color Laserjet 2605dn, and all of the color ink cartridges have run dry. However the black cartridge has more than 2,000 pages of ink in the printer and it won't let me prink only black and white. It seems that the color cartridges must also have ink in them so that the printer to print. Does anyone know a work around so that I can print with the black cartridge and not buy color cartridges?

  Hello

  Thanks for the post.  I have attached a link below that can help.  Good luck!

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 110 & prodSeriesId = 1140727 & prodTypeId = 18972 & prodSeriesId = 1140727 & objectid = c00660239

• HP Color Laserjet 2605dn: Print is washed out/completely wilted on printer 2605dn

  We have a Laserjet 2605dn HP color printer has intermittent printing problems. Most of the time, the quality of the printed output is very well, but from time to time, the print quality deteriorates completely. After a while, printing then returned back its normal quality.

  The printer is on a network and serves as WIndows XP/7/8/10 and Linux machines as it has throughout his life. He has never had a genuine HP toner cartridges installed. It is not heavily used, we print usually less than 100 pages per week, often less.

  The problem is that out of all the colors and black, gets so bad as to be unreadable. The printed output is so washed out it's (almost) impossible to read anything through the entire page. This can happen for all the pages of an entire document, but often it will print the first part of a multipage fine print job and then the quality deteriorates gradually to illegibility. Subsequent print jobs will also sometimes unreadable, but are also likely to print correctly. There seems to be trigger (that we can determine) this behavior or when it will happen well.

  While the printer was used for a few years, he printed out a little more than 20 000 pages in total. This leads me to think that age should not be a problem. We replaced all the cartridges, tried recalibration, print cleaning pages, all without success. I found a solution for a problem of fading Magenta also requires cleaning the mirrors, but our problem is not that same as - everything fades to nothing in our printer, it is not a case of a single color fade a little, is much more radical than that.

  Suggestions as to how we could solve this problem? Is there additional information that might help diagnose the cause and suggest a fix?

  Thanks in advance for your suggestions.

  It looks like I won't get my hands dirty inside this printer after all. The boss decided it would probably be too annoying overall for me (US) to try to fix it. So he decided to buy a new color printer and remove it.

  Thanks for the answers to my questions.

  Now I just need to find how to mark it as "resolved", or otherwise close it, as appropriate in this forum.

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP Color LaserJet 2605dn

  I have a HP Color LaserJet 2605dn. It worked very well with the Microsoft Vista operating system. I just bought a computer with operating system Windows 8 home and now my printer won't do the double sided printed (not the manual double-sided, but printing double-sided on its own). Is there a driver out there who can help with this? Your Web site was an option for Windows 8 when looking for drivers.

  The default value is the duplexer is set to "not installed".  Go to the devices folder and printers, right click on the 2605, select printer properties, the device settings and set theduplex "installed" unit, apply.

  

• Unable to select output color on Color LaserJet 2605dn

  Original title: Color LaserJet 2605dn - color output

  I unplugged and moved the printer and color went gray scale - have tried to printer properties and clicked on all the tabs - there is no selection output color.  I have XP.   Thank you.

  I could download the universal print driver that solves the problem.  Apparently, I had a postscript driver causing the problem.   Thank you

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

  I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

  1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

  I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

  My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

  Please help, even the HP sales technician unable to answer me to this questation.

  Hello

  The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

  Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

  http://h10032.www1.HP.com/CTG/manual/c04475955

  You can download the HP Universal Print Driver below:

  http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

  As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

  It is a customized operating system version includes only the components of the operating system selected for specific needs.

  Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

  Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

  Kind regards

  Shlomi

• HP Color Laserjet 4700n printer series

  Hi, I am trying to install printing wireless on my HP Color Laserjet 4700n printer in my office with three different computers. However, I have trouble finding how to do this on every computer in the office. I would be grateful if someone could help me with this or even tell me if wireless printing is possible with this series. Thank you.

  According to the data sheet for the Laserjet 4700n printer range, this printer has only these methods of connectivity. Unfortunately, wireless printing is not mentioned.

  LaserJet 4700n connection methods:

  • Improved the card slots of input/output (EIO) for connectivity option. (Network connection using an embedded HP Jetdirect print server is standard on HP Color LaserJet 4700n, HP Color LaserJet 4700dn, HP Color LaserJet 4700dtn and HP Color LaserJet 4700ph + printer.)

• HP color laserjet 2840 printing and copy blank page

  Hi all

  I have hp color laserjet 2840, printing and copy empty, I change the toner and drum but nothing! any idea?

  Sorry for my bed English

  Thank you

  Try this test.

  Printed page in after you get the blank page open the access door and see if you can move the carrousel by hand.

  If the carousel will rotate the carousel latch is stuck.

  The lock can be fixed by disassembly of the valve and clean some foam sticky residue deteriorated and its replacement by a thin piece of material. I use stickers very thin markers of a dollar store.

• Color Laserjet 4600 printing Cyan (blue) on the face back papers

  We have a Color Laserjet 4600 printer. For a long time, it has been printing cyan on the back of the documents that are printed.

  Recently, I cleaned the front "roller", which is long and looks like a long piece of rubber/plastic black thick.

  It printed fine for a few leaves, then again blue printing on the back of the paper. The front of the book seems perfect, however.

  I also noticed more cyan toner, which is "stuck" on the front "roller" of the printer.

  I went back to take a picture of him, but I couldn't find on the "roller" to show you.

  Here are some photos to show you what I mean:
  http://imgur.com/a/wBYxx

  What can I do to fix this?

  The part number of the kit is Q3668-67925. Very easy to replace. You just remove the screw at the top of both sides and just slide the old one out and put the new. You must first remove the top of the foot. If you have a crazy glue container, the people were able just to glue the broken pieces and put back once the glue has hardened.

• HP Color LaserJet CP1515n printer

  I have a dv6 Hp Pavilion Entertainment PC with Windows 7 Home Premium. System type: 64-bit operating system.

  But I have a problem in istalling the software for HP Color laserjet CP1515n, the bed of the cd that came with the HP Color Laserjet CP 1510 Series printer.
  Please what do I do?

  Hello

  I would say that you can download and install the driver from the driver following HP support link and check if that helps.

  Software downloads & driver - HP Color LaserJet CP1515n printer:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3422468

  Hope the information is useful.

• Color LaserJet 1600: print error for Color LaserJet 1600 not solved with troubleshooting or relocation attempt

  I get an 'impression' error when trying to print any document. Have used the convenience store, who said that a print job has been blocked and that the authorized troubleshooter. Second attempt, same result. Attempt to uninstall printer but had received "implemented encountered abnormal program execution. Implementation will stop. "The next window: your printer may have been incorrectly installed, try to reinstall with the recommended settings. Got it but no change. Try "add/repair" printer with no solution. INFO: Color LaserJet 1600, PN # CB373A, Windows 7 Home Premium

  Hi Brenda6,

  When you reinstall the printer helps reinstall you by plugging the USB of the computer? Or are you downloading from the HP site? I recommend that you disconnect the printer from your computer by unplugging the USB or disconnect the connection without wire and then go to the HP support for HP Color LaserJet 1600 printer. Find your printer driver and reinstall.

  I hope this helps!

• my hp color laserjet 3500 printer can work with cloud services

  my hp color laserjet 3500 printer can work with cloud services

  The printer listed does not support cloud services.

  Printers supported by cloud Services

• Color LaserJet 2605dn: changing the toner cartridge guaranteed?

  Can someone help me to replace what seems to be a faulty cartridge? I could find absolutely no information on how to do it on HP's Support website to the regular address.

  Q6003A magenta toner cartridge prints very light. Looks pink instead of magenta. This is true even on the 'Page State supplies", which shows the level of toner to 74%: Pages printed with this power supply: 418; Rest of approximate Pages: 1189. I have 'shaken gently"the magenta cartridge without result, and I see no flaws on the drum. 'Cleaning' running mode did not help; He only printed black. The other three cartridges all show them a solid color, so I deduce that there is a problem with the magenta cartridge itself.

  See below. The title and the area around it are supposed to be "Purple"; There should be a (not complete magenta) rose "2605dn" to the right of the printer "HP Color LaserJet.

  Any suggestions as to how to get this replaced would be greatly appreciated.

  

  You do not have a faulty cartridge, you have a dusty mirror in scanner Assembly laser.

  You will find the instructions on how to disassemble the printer and clean the mirror through various sources online and probably even in the forums.

  The index that identifies your problem is melted magenta from left to right.

  If you decide to take the machine apart and clean the flat mirror handle cables very gently then reconnect the very carefully.