HP Color Laserjet 3800 Apple Airport Extreme problem.

Similar Questions

• HP Photosmart C4795 with Apple Airport Extreme Wireless router - cable PC problem

  Hello

  I searched, but I can't quite find an exact match for my problem.

  I have a new HP desktop computer running Windows 7, and I attach it to my wireless router which is an Apple Airport Extreme.  I have attached my HP C4795 printer to the USB port on the * router *.  In theory, the USB key should pass through, so that the office will think it's a printer "connected", while also allowing us to print remotely from our laptops (via the router).

  Unfortunately, while portable computers can print wireless very well, the * office * Guard 'lose' the printer, thinking that it is in offline mode.  Even when it shows 'online' (after my relocation via "Add a printer"), still error-out print jobs.

  Can someone help me understand how this works?  The printer works fine, btw, if I disconnect the USB cable between the router and plug directly to the PC, if it isn't something directly with the printer or the desktop, but rather the * combination * of running through the Apple Airport Extreme router.

  Thank you

  Terry

  Thank you, once again, Jim.

  I think I have stumbled on the solution.  I did a reading online on Apple application 'Hello', and how he felt necessary for Apple devices, like the airport, knit with device sharing.  I forgot that the installation of the airport disk had said something Hello installation, but I discovered on my Wired HP Win 7 PC menu programs, called 'Hello Printer Utility' or something, and I launched it, selected the C4795 in the dialog box, and all seems to be put in place (i.e. the printer suddenly showed as 'online' and I could print from my desktop wired as well as wireless laptop).

  Success!

  Thanks for all your help on this.  Now, all I need is to get my WD My Book external/sharing the hard drive to work as well!  Unfortunately, I do not see here a "Hello Hard Disk Utility", but I feel somehow that morning will be the answer.  I just understand it.

  Thank you

  Terry

• Apple Airport Extreme and new FIOS router - problem

  Hello, I have an Apple Airport Extreme 802.11n base station, which worked well with a Comcast router.  When you set up with Comcast router, I set the router to comcast to bridge and the Airport Extreme has done all the work as the main router. When I switched to Verizon FIOS today, I get the typical mistake of NAT double (that I did with the Comcast before configuring the router to Comcast to bridge).  However, the tech support guy FIOS said that was not an option, so he set up my Airport Extreme in bridge - router off mode mode.  This really live to the top incoming access using SSH, Timbuktu or the Apple screen sharing, given that I can't assign fixed IP addresses to the computers on my network and can not use the Airport Utility Network Port settings to open "pipes" for a particular computer.  In addition, I'm more comfortable using Airport Extreme, rather than things FIOS. Someone at - it other than enter Comcast suggestions?

  I did a search and didn't see a post on this in the discussion forum.  Thank you

  What is the brand and model of your router Verizon? Verizon provides you with administrator access to it to allow you to make changes?

• Purchase of 3rd Apple Airport Extreme Base Station

  My current 2 Apple Airport Extreme Base Stations (the two 5th generation) are implemented as shown in the screenshot below.

  My fiber service (80 MB/s) is hard directly on an Apple Airport Extreme Base Station plugged into my home office (via an Ethernet cable that connects from the box of fiber on the outside wall of my house to this AE).

  While AE is hard wired to a 2nd AE in a separate building in my back yard (via an underground conduit of PVC).

  Wired connection that's not a separate Ethernet cable.

  Instead, my provider of fiber spliced in an existing telephone cable that already existed.

  Currently hard connected directly to that 2nd AE in the building separated (via Ethernet cable) are the following:

  My Dell Precision Tower 5810

  My Canon imageCLASS MF6160dw (all-in-one)

  Printer color of my Epson Stylus Pro WF-5190

  (Suite after screenshot)

  

  I am replacing a very old 30 "TV Sony with a 60" LED Smart TV & want to run an Ethernet cable from the AE 1st in my home office to the living room where will be the TV.

  My intention is to add a Roku at the same place than television.

  In addition, I want to increase my wifi signal in the room.

  I know that the Express is 1/2 the cost of the extreme, but will most likely go to the extreme. - If the extreme will give me faster speeds for my Roku and TV.  In addition, I like to have the additional ports available if I ever sign anything else.

  My fiber Service is 80 MB/s Up & Down, but I regularly receive about 96 +.

  80 MB/s is no longer offered by my supplier of fiber, but I'm grandfathered in.

  The available speeds are now 45 (?) with the speed of 100 Mbps.

  I think I'm really on 100 Mbps service.

  QUESTIONS :

  The 2nd AE has been "extended" EI from 1.

  Just as "extend" the 3rd AE?

  For speed best / highest in the living room, the most recent AE should be in the living room next to the TV & the Roku, or he would replace the 1st AE who is in my home office since it is one that is connected directly to the box of fiber on the outside wall of my house?

  Other recommendations will be greatly appreciated.

  The 2nd AE has been "extended" EI from 1.

  Just as "extend" the 3rd AE?

  Yes, either by connecting to the extreme 1... recommended, if possible... .or extreme 2nd... If it is not convenient to connect to the 1st.

  For speed best / highest in the living room, the most recent AE should be in the living room next to the TV & the Roku, or he would replace the 1st AE who is in my home office since it is one that is connected directly to the box of fiber on the outside wall of my house?

  Locate the extreme new... which has a much better arrangement... wireless antenna where it provide the most benefits to nearby wireless devices.

  Otherwise, you might want to consider renaming your airports, because the current device names far exceed the recommended length name a 26 characters max, including spaces. Keep the name short and simple wireless network as well... and to avoid special characters in the name... as an apostrophe, a sign dollar, asterisk, etc..

• ARE remote with Apple Airport Extreme router wireless

  Hi all! I'm controlling my DA5800 STR using the Remote ES app but neither my iOS device sees the receiver OR my Sony Android Tablet S. So I figure it must be the network set up. I use a cable modem Motorola connected to an Apple Airport Extreme via an ethernet cable. The receiver is connected to the router, as shown in the manual.

  I'm doing something wrong here?

  Thanks in advance for any help!

  Hello Sandiegodom,

  Please check the network settings on the receiver ARE and confirm that the 'external control' is active, as well as the "relief network" that will allow the application ARE the 'waking up' the unit from standby mode.

  Also check that your phone is connected to the same wireless network, and IP addresses of the phone and the receiver are in the same subnet / IP Range. UpNp must also be enabled in the settings of the router.

  If you have verifed that these settings are correct, then the question is perhaps with the router where it does not send data to the local discovery of uPnP network devices. A simple power reset or resetting the router will sometimes force the router to send back data and should fix the problem if that is the case.

• SG300 combination with Apple AirPort Extreme

  Hello

  I recently bought a SG300 series switch. I want to connect my internet connection in a port of the switch and connect my Apple AirPort Extreme in the switch. So I want that all my other ports on the switch to be put to rout by the airport. Connection Internet and airport to the switch gives you access to the Internet for all wireless clients connected to it. But no switch ports can ping from the airport.

  How can I configure this as simple as possible?

  What I've done so far is to switch the L3 and nothing else. With nothing has changed from the default settings, I was expecting unrestricted access between ports, but appears not to be the case.

  It's my first time, so I expect that it's probably a simple problem.

  I hope someone can point me in the right direction.

  Thank you in advance.

  FR. Lars

  Lars salvation,

  I don't know what is the idea behind connection WAN and LAN to SG300. Is it because you have a single switch, but would need two?

  Also I am not aware how the airport works. Not NAT?

  To add a static route you must navigate Configuration IP--> IP--> Routes IPv4 interfaces and management

  Destination must be 0.0.0.0 IP prefix also 0.0.0.0 if this static route so to access internet.

  Kind regards

  Aleksandra

• Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

  Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

  Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

• WAG160N and an Apple Airport extreme

  I recently bought an Apple Airport extreme, and in order to use the guest account, I need to disable DHCP and NAT on my WAG160N settings and allow extreme settings. Otherwise the extreme is in bridge mode and therefore doesn't let me create a guest account.

  Could someone tell me please what settings I need to change in the WAG160N so that it acts as a modem only and not a router.

  Thank you

  You can't disable NAT on the WAG unless you go to fashion of the bridges, which means that it becomes a simple modem. You cannot use the wireless on the WAG, nor anything else. In bridged mode, you configure Airport Extreme as main router connecting to PPPoE (or whether you need from your ISP).

  Switch mode bridge on the main configuration page.

• Photosmart more B209a-m does not connect with apple airport extreme base station

  I use the B209a-m wireless with a netgear router OS6.  I just changed the Netgear to an apple Airport Extreme router.  All my other hardware connected successfully with the new router but the B209a-m says "no connection found."  I know the printer is well within the router.  I have reset the factory settings on the printer.  I've disabled the system and restarted.  None of this has worked.  Suggestions?

  Hello

  You should not connect it to the airport.

  You must connect the printer with a USB port on your Mac, then run the HP installation wizard.

  From there, you will be guided to provifde the details needed to establish the connection between the printer and Airport Extreme wireless.

  Once the process will be completed and set up the wifi connection you will be guided to unplug the USB.

  You must use a USB cable high speed standard, not longer than 2 m in length.

  The square end must be connected to the USB port located at the back of the printer:

  

• Cannot print with HP6840 since I added the password to the Apple AirPort Extreme network

  I recently added to my Mac Airport Extreme network WPA password protection. While I can access the network from my computer, I can't print a HP6840, one of my two wireless printers, even if there is no problems prior to the addition of password.

  I can always print to my old HP LaserJet 6MP using an AppleTalk-Ethernet bridge and managed to reconfigure my second wireless printer to work with the new password.

  I already tried the following:

  Uninstalled/reinstalled the original CD and more recent software/drivers HP printer

  Tried to printer configuration using the Ethernet - half thanks looking for printer, received an error message "Communication error with a printer" and the installation process has failed.

  Checked: Safari bookmarks / Hello: printer does not appear

  Computer and the printer turned off and restarted the computer

  None of these attempts succeeded.

  Any suggestions on how to restore my wireless printing?

  Thank you.

  MichaelT

  Mac OS 10.5.7 iMac with Intel processor

  I spent 3 hours on the phone this morning with the HP Technical Support. While the call cost me $35, it's probably money well spent. After trying all kinds of approaches to installation, we finally concluded that the villain was probably the combination of personal WPA2 to authenticate password on my network and the inability of the HP6840 printer (now almost 5 years) to support WPA2. Tech said that WPA2 wasn't around 5 years.

  So I have two options: delete the password completely and let my unprotected network, use a WEP password (which can create an Apple AirPort and the printer can recognize) or try a WPA password. However, it seems that the airport offer only WPA-Personal and WPA Enterprise, while the printer does not seem to accept the WPA.

  Even if I don't really relish change passwords again, it seems that WEP is the way to go.

  Hope this helps those trying to install old printers on the new networks.

  MichaelT

• Configuration of the Airport Extreme problem and Vigor 120

  Hi all

  This is the case, I have vigor installation 120 in Bridge mode with my airport extreme with settings pppoe settings of my ISP of vpi/vci: 8/35 pppoe/llc adsl2 + login and password, when the force as a router configuration, there worked perfectly, but in Bridge mode has managed to establish a PPPoE to pc but when the connection with the airport no luck I got an invalid ip address and orange light flashing.

  I have the latest in airport and vigor firmware and I'm doing a powecycle reboot after each change.

  Here are the settings in effect 120

  

  

  Any help would be more than welcome

  It's sad to say THAT PPPOE on the Apple is not reliable.

  I have the same problem... I can't use routers Apple with PPPOE on my modem in bridge... regardless of the brand.

  PPPOE is a bunch of variations... PAP or CHAP for example... and the number of... repeated attempts time between repetitions.

  Apple offers zero... whether it's no control... they are all available right now to find out what newspapers or.

  I had to simply replace the Apple router with another router... any other router seems to work fine... It's just the Apple that failed on me...

  I tried with several different Apple routers using all the old firmware, at latest... all fail. So I guess it's less coherent.

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• On my apple AirPort Extreme

  Hello

  I have DSL connection device, and I was trying to blog my AirPort Extreme devicees to him, but its giving me blogging on. When I connect the first device it works perfectly, but I'm trying to blog in my house 5.  When I try with the rest devices that all off them stop working I don't know what is the problem. So please if you guys can help me with this I would be grateful...

  Thank you

  Mr. Sagar

  I'd like to help, but I'm not sure of the syntax.

  You say you use DSL to connect? You're talking about this blog? (I don't know what "blogging on" means.)

• HP OfficeJet L7780 802.11 g - why it cannot find my Apple Airport Extreme?

  I bought a HP officeJet L77380 all-in-one printer/fax, etc. It is designated in 802.11 g I turned the radio network / wireless 'on '. When I choose Network/Wireless Wizard I get a rotating cursor and the message «Search» router wireless... "and he never finds anything. "I chose my Airport Extreme Radio Mode Setup: 802.11n (802. 11 b / g compatible). It still does not work. Help! And a Happy New Year in this Discussion Forum.

  I downloaded and reinstalled the current driver.  It works fine when it is connected to the Airport Extreme, even via an ethernet cable.  I posted this to the talk of HP and they told me to contact the Apple Support! (this shows how useless this company may be!).  I also spent an hour on the phone with HP support and it turns out that they put me thro' for their expert XP and there weren't available Mac technicians.  Well - it's Saturday night!

  Just to be clear, you're saying your L7780 is unable to discover your network wireless printer Wireless Setup Assistant?

  BTW - I run a 802.11n Airport Extreme wireless router at home and my HP wireless printers work fine.

  I would like to see the report of internal connectivity of the printer.  Press the < configuration > and <># keys simultaneously.   Analyze the report on a memory card, copy it to your PC and post the image here.

  The connectivity report will give me details about your wireless network and the networks in the region.

  Also, what other wireless devices you have connected to your network?

  Best regards / Jim B

• Network with Airport Extreme problems connected to the Linksys switch

  I have a wired network in my house.  It has the following configuration: Modem base station Airport Extreme for Linksys switch and then all wired connections.  It is in a wiring closet in a room upstairs.  I have 2 other extremes from the airport, to spread out of the range, but they are currently disabled and disconnected from the network until I have found why I get auto ip address on several of my wired connections.  I have reset the modem, EI and switch.  More wired connections seem to be working very well, but there are 4 or 5 who say that the ethernet cable is connected, but it can not connect to the internet because of a self assigned ip address.  I thought maybe it was a problem with the port of the switch, but when I plugged a cable work in, everything worked again.  Thus, for example, on my iMac, in a study downstairs, I had plugged on the ethernet port in the wall.  He let me only to connect to wireless internet.  He says the ethernet connection had a self assigned ip.  I went upstairs and took the cable from the switch and directly connected to the Airport Extreme, and then connect to this iMac worked fine via ethernet.  So I'm really confused as to why it does not work when it is connected to the switch.  Why are only a few connections ethernet works and others not?

  Any help would be greatly appreciated.

  Why are only a few connections ethernet works and others not?

  Because either you have a bad port on the switch (unlikely, but possible) or a wired Ethernet connection bad, or maybe both ends of several of the Ethernet cables (99% of the time, the problem is in the wiring or connectors Ethernet... not the switch).

  But, we must test the switch first and then work from there.  It might be much easier to call a guy from wire or the custom installation specialist to do all this for you, but if you want to give it a try... Here's how.  It is not difficult at this stage, just take some time.

  Unplug the switch except the Ethernet cable that connects the AirPort Extreme to each cable Ethernet switch.  Label each Ethernet cable with a number or a letter you can install the wires in their original position on the switch.

  Use of a laptop computer with an Ethernet port and a short, spare Ethernet cable... virtually no matter what length will make... and turn off the WiFi on the laptop so it should use Ethernet to connect to Internet.

  Test an Ethernet port on the switch with the laptop and the Ethernet cable to make sure that you have get a good Internet connection. If you do so, test the next port of the switch. Continue until all ports of the switch has been tested.  With luck, they will all work.

  If this is the case... which is likely... then you know that the Ethernet switch is working properly.

  Now things get a little more complicated. Ideally, you have documentation that tells you what Ethernet cable goes to what area of the House. If you don't, just connect the Ethernet cable to the switch... then go to the other end of the Ethernet cable to the wall outlet and connect the computer laptop and short Ethernet cable to the wall socket.

  If you have no documentation to indicate where each cable goes, so go ahead and connect all the Ethernet cables to the switch.

  Still, make sure that the wireless is disabled on the laptop so that it can only connect to the Internet via an Ethernet connection. Check if you can get a good connection Internet in this way. If you can, then you know that the individual Ethernet cable and the Ethernet port on the wall are working properly...

  Test other areas one at a time the same way.  You are very likely going to find Ethernet cables or a wall of ports that do not work properly. The hardest part here is that you... or a wire guy... will have to check the Ethernet cable at both ends to ensure that the Ethernet Sockets have been installed correctly.  It is not easy. The wires are tiny and its easy to get involved.  Installation of new Ethernet cards, it's really a job for an experienced guy who will provide hopefully a cable Tester well when it comes.

  Some Ethernet will certainly be replaced.  In rare cases, the cable itself has a break somewhere... and it's not easy to fix something like this, without pulling new cable... that would not be possible according to the House provision.

  When you know that all ports on the switch are working and all ports Ethernet wall around the House work... so... we can get the network set in place and working properly.