HP Color LaserJet 4550: HP Color LaserJet 4550 PCL XL error

Similar Questions

• LaserJet 5000: PCL XL Error subsystem: error JPEG: InternalError 0xc8

  From one day to the other, computers Hp Envy Phoenix stopped communicationg with Laserjet 5000.    Both are running Windows 8.1 and using the latest Univeral Driver PCLv6.0 when you print a test page, I get the message listed in the topic above. It seems that something has updated to causse this incomparibility.  All of the suggestions.  BTW, an old HP Pavilion computer running Windows 7 print beautifully.

  I want to thank you very much.  I have following AVG internet security and not only the antivirus must be turned off, but the entire suite.  There is a button for this in the advanced AVG settings.  Once I did, I was able to print.  FINALLY!

  Called AVG and they will soon send a solution!  Thanks again

• HP Laserjet 1320 PCL 5: Error Message with my HP Laserjet Printer

  My HP printer keeps showing an error state and I can't print.

  I got the problem fixed.  It was my counter top that was the problem and had to use the feature of sharing with the laptop.  I don't know how it changed to not share, but he did.  Thank you for your help...

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• Color Laserjet MFP M476dw Pro: Color Laserjet MFP printing PCL XL Error M476dw Pro

  Only, we installed our printer HP Color Laserjet Pro MFP M476dw yesterday and I noticed once it is published a PCL XL Error report instead of what I was printing.  I don't think that anything from him, but today, it happens almost all the time.  I tried to find possible solutions and stumbled upon everyone says to disable AVG...  We do not use AVG, we use MSE.  Is it a driver problem or else?  Any help would be appreciated.  Nothing more annoying than to try to use a new printer and it is not working properly.

  Could be a failure of the trainer.

  If you are using a test pilot a PCL5 PCL6 driver.

• Multifunction color HP LaserJet Pro 200: problem error 79

  HP LaserJet Pro 200 color MFP M276nw that has error 79 when the woman made an impression. I downloaded the firmwear date, but is not complete installation eventhough the poster 100% progress. Print has only 400 pages printed since new. Need help

  You must click on the link below and download the firmware update file and then run it and follow the instructions.  It is usually sufficient to tell the app what printer to update and it does from there.  Takes only a few minutes.

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-200-color-MFP-M276/5097648/model/5097653#Z7_3054ICK0K8UDA0AQC11TA930O2

• HP Laser Jet 100 color MFP PCL XL Error m175nw

  I have a HP Laser Jet 100 color MFP m175nw and spin Windows 8.

  I am suddenly receiving the following when I go to print:

  PCL XL Error - subsystem: TEXT - Error: InternalError 0 x 50 - name of the file: cheettext.c - line number: 710

  I made no changes to my system

  Hi @SFID,

  I understand that you have found a PCL XL Error when you try to print. I can help you with this.

  We will change a setting in the print driver that should take care of that.

  • Go to start, devices and printers, click with the right button on the icon of the printer and Printer preferences, click to the left
  • Click the Advanced tab.
  • Click on the + sign next to the document options.
  • Click on the + sign next to the characteristics of the printer.
  • Click printer data optimization, make optimized for text & vector instead of auto.

  

  If the problem persists, please update the firmware of the printer. Drivers HP LaserJet Pro 100 color MFP M175nw.

  Select your operating system, click Next and click on the software to download and install.

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet 3030: HP 3030 PCL XL Error IllegalAttributeValue

  I get the following error when you try to print a PDF file:

  PCL XL Error

  Subsystem: IMAGE

  Error: IllegalAttributeValue

  Operator: consulterles

  Position: 122

  I studied him this and tried to update the drivers (PCL 6) later and tried to switch to a PS driver, neither solution worked. I can't find a PCL5 driver available to try... someone has suggestions on how to fix this? Thank you. HP Laserjet 3030 on 64-bit Windows 10...

  If you didn't try the driver on the link below to try it:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=378057 & swItemId = ds_99376_16 & swEnvOid = 4192

  Also since it is a very old printer, firmware may not be able to manage the latest files. Go to the link below and make sure you have this version of the loaded firmware. If this is not the case you may need an older operating system to the firmware level but you can try to run the program as it can work. Also check the setting of the document you want to print. Make sure the paper size is correct and all other elements look OK. I have seen problems when a pdf by email has settings that did not match the default properties for the driver and caused pcl xl errors.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=378057 & swItemId = ma_45939_2 & swEnvOid = 228 #.

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• HP Laserjet 200ColorMFP M276nw: PCL XL Error, HP LaserJet 200 ColorMFP M276nw, Windows 8.1

  Printer: HP Laserjet ColorMFP M276nw 200

  Installation: cable network using the complete package PCL6 (last available online)

  OS: 8.1 64-bit Windows

  Problem:

  When you print to some programs (for example the Page of Test, Microsoft Word), the printer prints a page with the following text:

  PCL XL Error

  Subsystem: kernel

  Error: IllegalTag

  File name: kernel.c

  Line number: 1921

  Printing from Notepad works very well. Printing on other computers on the wired network is working properly.

  Troubleshooting steps:

  1. Updated firmware update
  2. Uninstall, and then reinstall using the latest version of the software available online
  3. Changing to optimize for the text on the Advanced tab.

  Thank you for your help.

  As explained above, it could be a fault of the driver, or intermittent corruption by the hardware, or (as http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 says) the result of a recent update of AVG anti-virus.

• HP LaserJet Professional CP152: update driver HP for HP LaserJet Professional CP1520 Series PCL 6 - error 0 x 80240017

  I get this error message when I check the updates on my 3 Surface:

  Driver HP update for HP LaserJet Professional CP1520 Series PCL 6 - error 0 x 80240017

  However, I have no installed printer HP software. I don't own an HP printer. I tried a lot of solutions of the forums looking online.

  How can I get rid of this error message?

  David

  Thanks for letting me know @DavidMG.

  The link you provided did not open, but I was able to find it, here is the link for anyone else who may need it in the future, How to disable temporarily a Windows Update or driver reinstall Windows 10

• Access is denied, cannot delete the hp LaserJet 1320 PCL 5 device

  HP LaserJet 1320 PCL 5 can not delete from my PC (Windows 7). Get the message "access is denied, cannot delete the hp LaserJet 1320 PCL 5 device".
  Any help will be greatly appreciated.

  Hello

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If the problem persists, I will be asked to contact the hardware manufacturer for assistance:

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?cc=us&lang=en&prodSeriesId=410622&prodTypeId=18972

  Hope the above information is helpful.

• When I try to change the color I get a "program error" pop up message. I tried to restart my machine, but it makes no difference. Any ideas?

  When I try to change the color I get a "program error" pop up message. I tried to restart my machine, but it makes no difference. Any ideas?

  To reset the preferences:

  1. quit Photoshop

  2. open Finder

  3. click go in the menu bar and choose go to folder

  4. type in ~/library and click Go

  5. open the Preferences folder and rename the folder Adobe Photoshop CC2015 Settings settings Adobe Photoshop CC2015 old

  6. Restart Photoshop and try to change the color to see if the problem still occurs.

• LaserJet 500 color M551 PCL6 - Toner level error

  I love my LaserJet 500 color M551 but I'm having a problem with the black toner level.  I went to spend the night to have a level of about 50-60% to 10%.  Literally from one day to the next.  I had just checked the levels during the night and the next day the black toner was low.  My use is very light.  According to the page using the number for the monochrome is 1 668.  Total is listed at 3 487.  According to the supplies Status Page 3 543 pages were printed with black and 2 154 ink with the 3, various tonic color.  The only chance 3 543 a to be healthy is if black was included in all color prints so total use of black toner without color would be in the area of 1,400 pages.   There is no way we printed 3 543 black pages and more 2 154 color pages.  We had this printer at 14 months.  We get a new pack of 500 pages about every 2 to 3 months.  At the absolute most, we printed 3 500 pages total.  Most of our impression is heavier on the color.  In fact, we have done a large number of color prints full page.  But given the way we print color is about where we might expect.  And when the black toner showed the 50-60% it was where we expected.

  So what happened? Why our drop of toner level to 10 percent from one day to the next?  I tried the cat with the support, but they did lose one hour of my time and absolutely nothing accomplished.  The service was terribly slow that it was as if a person has worked 3 or 4 cats at the same time.  So I tried it and vain.  The support representative suggested that I swap cartridges.  I don't have a spare those for Exchange.  It made absolutely no sense to me to buy a cartridge of 160-$180 if he could sit on a shelf for a year while waiting to get used.  I certainly don't want to buy and open a new toner cartridge just to know, nothing was wrong with the other.   So the line of background here is... someone has suggestions?  How will I know what is the real level of toner?  Is there a way to reset the levels?

  Better yet. Someone has this model of printer and a black toner empty known cardtridge?  If yes do you know the exact weight of a cartridge empty in ounces? I also want to compare this to the full weight of this model cartridge at 100%.  If I had these two weight I would be able to calculate the exact amount of toner remaining.

  Here, any help would be greatly appreciated.

  I have a simple solution to your problem: just keep printing.  There was problems with the guarantee of toner system where there are sudden jumps in reported toner level, like what comes to live.  Unfortunately, we do not have a foolproof system for reporting levels of toner, and there is no method for re - calculate and declare a correct level in your cartridge.  Toner templates does not rise, they count only down.  When you eventually replace the cartridge, it will start again at 100%.

  The good news is that you have not suddenly lost all life of the cartridge, it looks just like that.  Your printer will continue printing normally, and the toner level be at 10% for a long time.  When the black cartridge is in fact less than 10%, the pledge starts counting down again.  I'm sorry to see this problem coming up for visitors, but it does.  There is nothing wrong, except the black toner level reported.  I know this isn't a great answer, but it is the best I have.   I'm glad you like your printer - try to ignore the level of toner for awhile.

  Best regards

  Alan_R

• Color laserjet mfp 277dw pro: error message when installing

  I tried several times to install the printer, but once get 80% comes a message "error a problem occurred when preparing to install the software in your system." Restart your computer...

  Please help me

  Hey @valero1313,

  Welcome to the Forums of HP Support!

  I see that you have a problem with the installation of the software for your MFP Color Laserjet Pro m277dw on your Windows 7 PC. I can help you with that.

  Here are some things that should help you with the installation.

  1. If the USB cable is connected to your PC, delete.
  2. Click Start.
  3. In the search bar type "cmd" (without the quotes) and press ENTER.
  4. In this window type "msiexec /Unregister" (without the quotes) and press ENTER.
  5. Type "msiexec/regserver" (without the quotes).
  6. Click Start.
  7. In the search bar type "msconfig" (without the quotes) and press ENTER.
  8. Click the Services tab.
  9. Click Hide all by Microsoft.
  10. Click Disable all.
  11. Click the Startup tab.
  12. Click Disable all.
  13. Click OK and reboot your PC.

  Please let me know what happens after you run the Setup program after you follow these instructions. If this allows you to install, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.