HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

Similar Questions

• HP Deskjet Adv 2060: Driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Hello

  I have a desktop PC remotely with Windows Server 2008 x 64.

  I tried and still can't get a driver for my HP Deskjet Adv 2060, so I can't print in my house.
  
  May I ask if there is a compatible driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Thank you very much.

  Ryan

  Hey Ryan,

  This kind of low printers end support client operating systems only, it supports all print server OS or Citrix or RDP.

  You can find the printer specifications below, only the operating system on the system Rquiredments are supported:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-3183-all-in-one-printer-series---K1/4157434/model/4157334/document/c02063036/

  Kind regards

  Shlomi

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• LAN driver for Satellite L505 - 10Z PSLS3E on Windows Server 2008

  Hello world

  We hope to find a solution for my case.

  I have Toshiba Notebook (PSLS3E-L505-10Z) and installed Windows server 2008 on it, but I can't find the driver Lan for this OS. Could guide you please solve me this problem, because I lost a lot of time to research on the toshiba Web site and with no valid result realtek Web site.

  Thank you

  Hello

  Windows Server 2008 is based on a Vista/Win 7 OS.
  It s like the same situation 5 years ago. Win 2003 server was based on Win XP and all the drivers Win XP are compatible with Win 2003 server.

  If you are using Windows Server 2008, then you should try the Vista/Win 7 drivers!

  Good bye

• I changed my hard drive one that CPU to another in windows server 2003 64-bit enterprise version has been installed.now its prompting me to activate.what measures can be taken to activate with the old key

  Hello world

  I use windows server 2003, enterprise edition 64-bit. I changed the hard drive of one single processor to others. and now I face problem of activation. I'm not able to enter my old key to activate it. and its asking me to connect on internet.i must sign my user name and password to use internet.

  If anyone can suggest me how to get activated with over to connect to the internet and using the same old key for the hardware has changed...

  Hello

  1A, that the version of Windows is OEM copy?

  Check out this link to validate windows.

  I suggest you to validate windows and it would automatically activate the copy of Windows.

  What is the validation, and how does it work?

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/what-is-validation

  I hope this helps.

• I can't do the web pages of my drive to display in Internet Explorer in Windows Server 2008 32-bit

  I saved web pages on my local drive, but I can't seem to display in Internet Explorer in Windows Server 2008 32-bit by entering the URL in the address bar, even if they appear when I click on the file in Windows Explorer. The IIS7 start page, even if the document by default, I made the file you want.

  Hello

  The issue you have posted is related to Windows Server 2008, I recommend you post this question in the Windows Server forum.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• PowerEdge T610 Driver built-in Windows Server R2 2012 - Matrox graphics card?

  Hi, so I just upgraded our t610 server to windows server 2012 r2, but unfortunately I ran into a problem where the default driver for the graphics card is "Microsoft Basic Display Adapter."  I did some research and discovered that the graphic chipset embedded is a Matrox card, I tried several different adapter manual but with no. avail.  The reason why I'm trying to find the right driver is b/c the current detects properly the resolutions for all monitors that I connect to the server, so all the images on the screen are a little distorted.  Please can someone locate me a compatible driver for a manual installation?

  -Jay

  Slybrood7,

  The video driver is native support for R2 of 2012. Follow this link and try this update, if you have not already.

  Drivers Matrox - http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=08MVF&fileId=3337867393&osCode=MWS80&productCode=poweredge-t610&languageCode=EN&categoryId=VI

  Let me know how it goes.

• Files Windows Server Essentials 2012 R2 Hard Drive Full move

  My hard drive was full.

  The indications he gave me was to move files to another drive WD 3 to. I did I saw the files.

  Then he said to back up my computer. I did it. but when I did that now I don't see my folders and files that were in the folders on the WD 3 to.

  How do I get back my files?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Driver for missing MS Publisher Imagesetter on Windows Server 2003

  I've got 8 servers running Windows Server 2003, 4 of them can not install the MS Publisher Imagesetter in the Add Wizard of printing imagesetter, the only options available are:

  PS 35PPM

  35PPM PCL

  PCL6 35PPM

  Also it a generic 'printers' group, but it only contains Laser printer drivers.

  The servers that run Windows 2003 using Office 2003 or Office 2010, but all have the same problem.

  Why is the MS Publisher Imagesetter imagesetter installation option is not available?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Stuck on "Checking system" during the installation of the driver. J4580 all-in - One Printer, Windows 8 64-bit

  Hi all

  I have no idea why it doesn't work. For always remains in stage "verification system. There is no bar of progression, just an of these in loop task bars, so I can't say if something is really installation. Does anyone have a solution for this?

  Thank you!

  Janek

  Hello again,

  I followed the steps and even once, it did not work. However, I found a solution

  I tried to install the software after I cleaned the temp folder and did a clean boot, but the same questions redoubled. I opened the Task Manager and I force closed "HP Installer re-install Plug In (32 bit). This caused an error that caused the installer to uninstall/delete anything on my computer. When I tried to install the software after that, it worked. Clearly there is something already on the system at the origin of a problem.

  Thanks again for your help!

  Janek

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP LaserJet 4050: Error printing on HP Laserjet 4050 and 4100 Windows R2 2012

  We have recently migrated our Windows Server 2003 environment to Windows Server R2 2012.  Some of our printers, specifically HP Laserjet 4050 and 4100 no longer work with Server R2 2012, even if we downloaded the drivers for Windows R2 2012 from the Internet HP site and made sure the printer was using the new driver from HP.  When you try to print from the server or terminal connection, we get a "printing error" in the status field in the queue.  We do not know what to do to get these printers to print.  We have several of them and redirect users to print to another printer which is further so they can print.

  Do you have any suggestions?

  Best regards

  Paul

  If you cannot print from the server, then on the server, the parameters must be incorrect.  You can even ping the printers on the server?  Since you have more than 1 printer with this problem I doubt that all the printers hp all wrong.  Something else in the way that you configure these printers must be the issue.  If you can ping and also access the web server, then I think you have problems with active directory.  If you can not ping so perhaps have changed the ip addresses or the road you take these ip address has changed.

• Windows Server 2003 on the HARD IDE in Mode ATAPI drive?

  Hello!
  My problem is that I want to know if a HDD IDE will run in Mode ATAPI.

  More details >

  There is a motherboard of INTEL S5000 VSA server in the office. He already had Win 2003 and everything was fine until the HARD drive crashed and the people replaced by an a SCSI maintenance (I don't know if he had a SATA, SCSI or an IDE HDD previously). After installing new HARD drive, they were not able to install Win server 2003 and went for 2008. Windows Server 2008 creates problems for us and the maintenance people are also confused and unresponsive to the situation.

  We have Windows Server 2003 R2. The motherboard has only one IDE port but scored the "working mode" as ATAPI. I was wondering if I could just attach an IDE HDD and install Win Server 2003 R2 (since win 2003 supports SATA out-of-the-box)

  (Displayed in the section of WIN XP as Win 2003 sharing the same base with XP, XP users can comment too)

  http://www.Intel.com/CD/channel/reseller/APAC/Eng/products/server/boards/DP/S5000VSA/feature/index.htm#specifications

  If a geek myself, I'm not very educated when it comes to servers. a Google search also did not help. I would be grateful if someone can help out me.

  Thank you
  Chirag.

  Yes it will install and work fine on an IDE hard drive, ATAPI devices are all IDE drives.  The downside is that the reader will be much slower than the SCSI on a busy server, which can be a big disadvantage.

  For all its value that they probably could not install Server 2003 on the SCSI disk because they weren't using the method of F6 to provide drivers SCSI on a diskette or that they could not understand or how their wake worth installation CD.  There is no need of such a monumental lapse, notwithstanding the limitation INT-13 NT4 Server installed on SCSI and Server 2003 installs on SCSI providing that you give appropriate when installing drivers.

  John

• HP Laserjet - R2 Windows Server 2012

  Hello

  If someone can tell me, what HP laserjet product can compatible with windows server R2 2012?

  * Sorry for my bad English *.

  I don't have a list of hand-dandy, but I would start looking at the machines were the first digit of the model number was at4 as the M400 series.

• Installation of Windows Server 2011 on drives mirrored in N40L

  First POST:

   

  Happy (and successful) New Year to you!

   

  I just got my N40L Proliant, and I intend to mirror the boot drive before you start the installation of the OS. Will it take the RAID driver on "floppy" in order to install Windows Server 2011?

  Literature talks about the creation of a floppy disk, but before that I have to create a floppy drive!

  I'm working my way through the documentation, but it was not written for people with symptoms of dementia of old age... so I decided to ask here, in the hope that someone else has tried this recently and can give me a straightforward answer.

  I think that just, I freaked out when I saw the word "floppy". Probably if I need to install RAID drivers during the operating system installation phase, then they would have to come from a USB key, as seems natural replacement of disks (I have a bunch of those covered in 20 years with a value of dust...)

  Hello:

  And a very happy new year to you too!

  Welcome to the HP consumer support forum.

  I recommend that you also post your question in the HP business - Netservers section support forum where you can get more help.

  http://h30499.www3.HP.com/T5/ProLiant-servers-Netservers/BD-p/BSC-431

  Best regards

  Paul