HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

Similar Questions

• Officeject Pro 8610: Wireless connection between IMAC and Officejet Pro 8610

  I've had this printer for about 6 months now and was hoping a firmware update would happen to solve the problem but didn't.

  I use the printer wireless for all my devices in the House. My Windows devices connect you to the printer very well and print correctly. But for my main computer, which is a 27 inch iMac running El Capitan 10.11.5, I have to "trick" the printer to print from the iMac. It will not keep a session open between the two wireless.

  To use the printer, I keep a blank sheet of paper on the scanner and then reach over and hit "Copy", which then copies the blank paper. During the copy process, I then print everything that I need to print my iMac and it works fine, but 20 seconds after that work is done, the connection is lost between the printer and the iMac.

  I see a lot of questions about it on the HP Support forums, but no one come up with a Solution from HP. Hard to believe knowing that the company that I work uses HP to support the business and buy huge amounts of material of can solve this problem bit between a printer at home and an iMac.

  Would love to hear that a solution is near, or perhaps you must meet your hardware sales that this printer is not compatible with Mac OS. Would have saved me some money and frustration by buying do not.

  Hello

  The printer is fully compatible with Mac OS X, it is more probably relies yoru router or configuration.

  Uses of the devices Apple Hello to communicate with the printer, these require your router to support such a.

  Some routers do not support such an and some may need to be configured properly for such.

  I order to underestand better capabilities of your router, which is model and yoru router barnd?

  In the meantime go to System Preferences > printers & scanners and click the sign more.

  Click the IP tab, and then select the HP Jetdirect Socket Protocol.

  Type the IP address of the printer in the address bar and click Add.

  Note: you can find the IP address by typing on the Ethernet icon or wireless on the front panel of the printer.

  You can print using the newly created queue?

• Problems using rpc between Flex and CF

  Hello
  I have a problem to send objects between Flex and Coldfusion using the gateway of the AUTHORITY of the new Version of Coldfusion.
  The transfer of CFCS to Flex works, but I can't send a complex object to a CFC.
  
  The Error Message is:
  faultCode:Client.Message.Encoding faultString:' cannot create class of type 'flex. HotlineSystem.bin.cf.Category'. ' faultDetail: 'Type' flex. HotlineSystem.bin.cf.Category' not found. »
  
  Im going totally nuts... the transfer of CF to Flex works very well, the mapping between category.cfc and category.as work of ist. But if I try to send a Flex object category to my CFC is not.
  
  I hope someone can help.
  
  Thank you!
  
  CFC function:
  < cffunction "insertCategory" access = "public" returntype = name = "Sub" output = "false" >
  < cfargument = "category" type name = 'flex. HotlineSystem.bin.cf.Category"required ="true">
  
  < cfquery name = "insertCategory" datasource = "hotline_system" >
  INSERT INTO category (category_idCategory, name)
  VALUES (#category.getCategory_IdCategory () #, ' #trim (category.getName ()) #')
  < / cfquery >
  
  
  Category.CFC:
  
  < cfproperty displayname = 'Category' alias = 'flex. Index HotlineSystem.bin.cf.Category"=" I model a single category ">
  < name cfcomponent = "idCategory" type = "numeric" default = "0" >
  < name cfcomponent = "category_idCategory" type = "numeric" default = "0" >
  < name cfcomponent = "name" type = "string" default = "" >
  
  < cfscript >
  Initialize the SWC with the default property values.
  variables.idCategory = 0;
  variables.category_idCategory = 0;
  variables. Name = "";
  < / cfscript >
  
  < name cffunction = "init" output = "false" returntype = "flex. HotlineSystem.bin.cf.Category">
  < cfreturn this >
  < / cffunction >
  
  < name cffunction output = "getIdCategory" = "false" access = "public" returntype = "any" >
  < variable cfreturn. IdCategory >
  < / cffunction >
  
  < name cffunction output = "setIdCategory" = "false" access = "public" returntype = "Cancel" >
  < name cfargument = "val" required = "true" >
  < cfif (IsNumeric (arguments.val)) or (arguments.val EQ "") >
  < cfset variables. IdCategory = arguments.val >
  < cfelse >
  < cfthrow message = "' #arguments.val #' is not a valid numeric" / >
  < / cfif >
  < / cffunction >
  
  < name cffunction output = "getCategory_idCategory" = "false" access = "public" returntype = "any" >
  < variable cfreturn. Category_idCategory >
  < / cffunction >
  
  < name cffunction output = "setCategory_idCategory" = "false" access = "public" returntype = "Cancel" >
  < name cfargument = "val" required = "true" >
  < cfif (IsNumeric (arguments.val)) or (arguments.val EQ "") >
  < cfset variables. Category_idCategory = arguments.val >
  < cfelse >
  < cfthrow message = "' #arguments.val #' is not a valid numeric" / >
  < / cfif >
  < / cffunction >
  
  < name cffunction = output "getName" = "false" access = "public" returntype = "any" >
  < variable cfreturn. Name >
  < / cffunction >
  
  < name cffunction = output "setName" = "false" access = "public" returntype = "Cancel" >
  < name cfargument = "val" required = "true" >
  < cfset variables. Name = arguments.val >
  < / cffunction >
  < / cfproperty >
  
  Category.As:
  
  package classes
  {
  [Bindable]
  [RemoteClass (alias = "flex. HotlineSystem.bin.cf.Category")]
  dynamic public class
  {
  public var idCategory:int;
  public var category_idCategory:int;
  public var name: String;
  
  public void category() {}
  
  }
  
  public void fill(idCategory:int,_category_idCategory:int,_name:String):void {}
  this.idCategory = idCategory;
  This.category_idCategory = category_idCategory;
  myIdName = name;
  }
  
  
  public function getIdCategory (): int {}
  Return this.idCategory;
  }
  
  public function setIdCategory (): void {}
  this.idCategory = idCategory;
  }
  
  public function getCategory_IdCategory (): int {}
  Return this.category_idCategory;
  }
  
  public void setCategory_IdCategory(category_idCategory:int):void {}
  This.category_idCategory = category_idCategory;
  }
  
  public void setName(name:String):void {}
  myIdName = name;
  }
  
  public function getName (): String {}
  Return myIdName;
  }
  }
  }
  

  Problem solved:
  Apparently, it is not possible to transfer an object from a class action script for coldfusion.

  The solution is to encapsulate the object (in my example category) in a table.

  Strange... but it works.

  Best regards

• synchronization of the problems of media between iOS and Adobe Premiere

  I have tried sync, a test of Adobe video Adobe Premiere today iOS app project. Just added a few clips and sent to the first. How ever in trying to open the XML file in the creative files folder I just get the:

  "The project could not be loaded, it may be damaged or contain obsolete items.

  tried several times. I also put my Adobe project at 30 frames per second as the source media

  no luck

  Anyone who can guide me?

  TNX

  Hi Max,.

  This problem has been resolved, no need to return to 8.1.

  Best,

  Bronwyn

  Community Manager for Adobe Premiere Clip

• problem syncing notes between mac and iphone

  Suddenly 6 months ago my notes stopped sync between my mac and my iphone. Synchronization between the iphone and the ipad still works. I have 'unchecked' syncing notes in icloud on all units, even disconnected my mac completely and back on to see if it would work, but no. When I check my iclouds units on my ipad, it lists only the ipad and iphone. And when I login to icloud in safari, showing notes on my phone and pad, not from my mac. So it seems that my mac is out of the loop. How can I me in?

  BTW, everything is fine, it's just my notes.

  If you have upgraded to a mobile device from Apple iOS 9 or a later version and then synchronize the Notes database to iCloud, then you won't be able to synchronize the Notes on a Mac with the same iCloud account until it is upgraded to OS X 10.11 or later version.

  Only the notes in the iCloud category will synchronize with iCloud. If you have any comments on my Mac, or synchronized with another network service, that they don't synchronize.

  If note that synchronization are not, please open the iCloud pane in system preferences. Make sure that you are connected to iCloud with the good Apple ID and the Notes selected. Uncheck and check again.

• problems of compatibility between mac and windows live

  Hi-

  I created a photo album and shared a link with some of my friends using windows live, but my friends who use a mac can not seem to view the photo albums.  How can I get the two systems to be compatible - pc to mac?

  Thank you

  Ask Windows Live Photo Gallery of the questions here: http://windowslivehelp.com/product.aspx?productid=20

• Problems with etherchannel between 2970 and 3500xl

  3500xl:

  WC10 version 12.0 (5)

  2970:

  Version 12.1 (11) AX

  I have four ports physical configuration in Group 1.

  2970 CONFIG:

  interface GigabitEthernet0/21-24

  switchport mode access

  no ip address

  full duplex

  Speed 100

  channel-group mode 1 on

  3500XL CONFIG:

  interface FastEthernet0/45-48

  full duplex

  Speed 100

  Port 1 group

  SUMMARY ETHERCHANNEL 2970

  SH etherchannel summary

  Flags: D - low P - port-channel

  I have - autonomous s - suspended

  R - Layer 3 S - Layer2

  u - unfit to tied selling

  U - channel port in use

  Ports of Port-Channel Group

  -----+------------+-----------------------------------------------------------

  1 Po1 (SU) Gi0/21 (P) Gi0/22 (P) Gi0/23 (P) Gi0/24 (P)

  ETHERCHANNEL SUMMARY FOR 3500XL

  Flags: d - D - down failure

  I - in use

  Port group

  ----- -----

  1 Fa0/46 (D) Fa0/45 (Dd) Fa0/48 (D) Fa0/47 (D)

  Everything seems to work with 2970 and data are certainly going through. I'm Telnet via connection and servers are connected.

  3500xl watch interfaces are in decline and spanning tree protocols in State of block. I know the etherchannel works but the 3500 says that everything is down. Any help would be appreciated.

  Thank you

  Brett

  Hello

  That you have connected only 1 port so have u deleted the config port-port group on 3500xl 48. If you have so and yet shpwing down, then I tell stop you doen the port manually and do not close.

  also try to change the 350xl ports.

  Thank you

  Michael C

• Problem of privacy between personal and professional pages

  I discovered that if I 'as' someone Facebook professional page of my professional page, they can click on my icon and access all my information from Facebook, even if I put it to "friends only". Microsoft is aware of this privacy issue? The only solution that I can determine is to make my information personal page visible by anyone else that me and then individually reset the settings for each post I do.

  www.Facebook.com/help are the only ones who could help you with this.

• Problem with the help of Adobe Premiere Pro *.prproj files between PC and MAC?

  Hi, I have finally got myself a MAC with a grunt to replace my PC and installed first Pro CC of the cloud on the Mac.

  I copied the files on my PC, but when I try to open the first Pro CC (*.prproj files) I get the following error:

  "This project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version"

  I don't understand, like the MAC and PC versions of first Pro CC have been downloaded from the cloud to Adobe.

  Can anyone offer advice please?

  Hi, Ashton,.

  There is no problem of incompatibility between Mac and PC files (files .prproj) project

  In your case, it is not updated to the version of Premiere Pro that is installed on your Mac. If the creative application cloud shows first as update, try updates to help Premiere Pro > updates... Menu.

  FYI: You should have first installed 2014.2 Pro BUILD 8.2.0 (65)

  Thank you

  Regalo

• HP Color LaserJet Multifuncti: HP Color LaserJet all-in-one Pro M177fw

  Hello

  I bought a HP Color LaserJet Multifunction Printer Pro M177fw, I'm fine, but I discovered that I'm not in the automatic two-sided documents. You can purchase the optional kit? Let me know. Thank you. Benedetto Colangelo - Trento

  Hello @Benedetto0

  The M177fw does not support automatic duplex printing, but only two sides print manually via the pilot...

  Any automatic duplex unit is not available for the printer, not as standard or as an optional accessory.

  You can find the specifications for your pritner below, refer to the section "Duplex printing" such as:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/HP-Color-LaserJet-Pro-MFP-m177fw?JumpID=oc_r1002_usen_c-001_r0002#! & TabName = specifications

  Kind regards

  Shlomi

• HP Color LaserJet Pro M177fw: HP Color LaserJet Pro M177fw

  I have a question, my HP Color LaserJet Pro M177fw, a few days ago my printer after pulling the used toner has ceased to function and to be put off. I am attaching it once again, but at this point display information on the 'introduction' display and the printer no longer nothing prints, copies, it does not scan, still running with toner bemben, inquire about what could have happened?
  This printer is dead as a result, is it the resuscitation anyway?

  I would be grateful for any response and assistance

  Hello
  Unfortunately I'm not able to cope with the printer, checked her computer friend and is always the same problem, I've updated the printer drivers on your computer, then is the same inscription initiation, I can't even move in any way over the top toner to swap, I noticed today that the printer feel as if something is burning - burning smell.
  Unfortunately, my English is not too good to talk to a hotline telephone hp, so I wonder it is possible to communicate electronically or by the Polish translator?
  Your faithfully
  Majki891

• Pro M177fw MFP stuck on initializing

  Brand new, right out of the box. Here's what I saw: the initialization is not complete, but I can tap on the Home icon. Noticed a symbol above the button of toner. Please I need your help fast. Thank you

  Hi @SangPham,

  Welcome to the Forums of HP Support!

  I understand that you are having problems getting your new HP Color LaserJet M177fw MFP Printer Pro installation. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that has not finished initializing and toner light is to inform you of a problem. It seems that some packing material has not been removed. Please take a second look.

  Use this guide to get instructions on how to properly load the toner cartridge in the printer: setting printer to printers HP Color LaserJet Pro M177fw multifunctional material upward.

  If the problem persists, please contact HP or put the printer in the point of sale.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Color LaserJet ProMFP M177fw

  I bought the printer, put in place and it works very well with respect to printing, scanning and copying - except that he falls asleep or turns off completely... Also, the touchscreen doesn't seem to work... It beeps from time to time, but it's almost as if entered orders are not processed until much later...

  Hi @tjsch162,.

  I see by your post that the printer goes to sleep or turns off completely and using the touch screen is delayed.
  I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Update the firmware of the printer. HP Color LaserJet Pro M177fw MFP drivers.

  Select your operating system, click Next, click the link for the firmware.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  You may need to set the time to sleep and define the sequence of events on the printer.

  Touch control panel:
  1. from the home screen on the product control panel, press the Setup button.
  2. open the following menus:
  The system configuration
  Energy settings
  Sleep/Auto Off after
  3. Select the time for the delay of sleep/Auto Off.
  NOTE: The default value is 15 Minutes.
  4. the product automatically wakes up when he receives jobs or when you touch the screen on the product
  Control Panel. You can change events make the product to wake up. Open the following menus:
  The system configuration
  Energy settings
  Alarm/Auto on events
  To disable a factor of reactivation, select the event, and then select the option no.

  This information was given by the manual on page 59. Multifunction COLOR LASERJET PRO.

  If the printer is on a network, we can configure a static IP address for the printer.

  Good day!
  Thank you.

• LaserJet Pro CM1415fn: Upgraded IMac and Laserjet now only print in black

  Just upgraded my iMac, and the printer now not working is not in color. I see that the software is not available for Sierra implies that this may be the cause of the problem is it? Wish now that I had just updated! Software will be available soon?

  Thanks for letting me know @Fosse.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on printers and scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet Pro CM1415fn)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems, and that the printer is on a network, just for fun, try connecting the printer with a USB connection to see if you can print in color.

  You could have one do a manual uninstall of drivers and install the HP v5.0 for OS X printer drivers.

  Here are the steps: Uninstall HP Printer (Mac) software.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.

  Restart the Mac.

  Empty the trash.

  Once connected, repair disk permissions.

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Click on the hard drive.
  Click first aid button, and then click Run.

  Try them HP v5.0 for OS X printer drivers.

  Thank you!

• Before you synchronize my iMac and Macbook Pro, in my menu bookmarks, all my favorites were colored icons - now they have disappeared - how to bring them back?

  Before you synchronize my iMac and MacBook Pro, in my Bookmarks Menu dΘroulant, all my favorites were colored icons - now they have disappeared - how to bring them back?

  It seemed to work on my FF 9.0.1 and Lion Mac. When I tried to set this parameter on FF 8.0.1 was ALREADY set to "FALSE". Must be something else?