HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177

Similar Questions

• LaserJet pro 177: bought used hp color laserjet pro mfp m177

  Installation disk arived broken. How can I do to replace it.

  Just upload what you want the site web theHP.

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• HP Color LaserJet MFP M177 Pro: No software to install

  Hi all

  I have a laptop of society and the installation of software is not allowed due to insufficient privileges.  For printing I added the driver " HP Color LaserJet Pro MFP M177 series Cffp Driver only (no installer) " I found on

  http://support.HP.com/SK-en/product/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443/DRIV...

  and driver is not "istaller" and printing works very well.

  I need also some "not istaller" driver/software that allows me to use a scanner. Is this possible?

  Thank you

  Peter

  Hi Peter,.

  Contrary to the impression, digitizing require imaging software and the scanner cannot be used without installing any software.

  Must have these permissions to install the software for scanning on the computer.

  To work around the problem, try scanning without using the computer.

  Follow the introduction section printable HP below, then search the HP site connected, if there is any what pads there are instead of digital archiving for your printer as "Scan to E-mail", "Dropbox" or a driver of Google that allow the scan to the cloud on the front of the printer.

  Platelets availability depands of the model of the printer, I have consist some of the above options may be available for your printer.

  Shlomi

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177 cannot find information network

  I just got my new printer today. I followed the instructions to the letter. Now I try to connect to my network to the "Wireless Setup Wizard" that my router does not support WPS. I sat waiting for the printer view all networks in the range so I could choose mine and continue on. However, after 15 minutes of waiting, I decided to go shopping while he did his thing. I came back 1 hour later and it's still displaying "Retrieve information from wireless network" with the symbol of HP and a blue bar encircling it. It is not locked up as I can hit the Cancel button and it returnes to the network configuration menu. What I'm doing wrong here? My network uses a router NETGEAR WNDR4500 with security WPA2-PSK [AES] is enabled. It transmits the band b/g 2.4 Ghz and 5 Ghz n band. Please any help would be appreciated.

  Hi @Rieu,

  Welcome to the HP Forums!

  I see that your HP Color LaserJet MFP M177 Pro cannot find the network on Windows 7. I'm happy to help you with this problem of connection!

  Please, take a look through the steps in this guide, "Printer is off-line" Message appears on the computer and the HP printer does not print. Thus, this guide, the printer is not maintaining the wireless connection.

  Tips for troubleshooting wireless problems

   

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• HP Color LaserJet MFP M177 Pro: MFP177 frozen screen energy saver logo

  My new Color LaserJet Pro MFP M177fw still works, but the front is frozen with the logos of saver hp and energy, which means that there are no features in the control panel. I can therefore use it to manually, make copies, or do something that I would normally with the front panel. I tried everything the hp support asked me to do it (plug it directly into the wall, restart it, hold down the power button for a minute, plug, reconnect everything, etc.) and nothing has solved the problem. It is clearly a hardware problem?

  Hi @eng-ihab,.

  Welcome to the Forums of HP Support! I see that the printer is locked during initialization. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  The update of the firmware usually fixes this problem, but I don't see one available for Windows 10. If the printer is installed on an older operating system also, I would say to run the update of the firmware with it.

  Here is the link: HP Color LaserJet Pro MFP M177fw, select the operating system.

  I would say to remove all toners, turn on the printer and wait for the printer to the State to reinstall toners manually. Just to rule out a toner not sitting correctly, the origin of this problem.

  You can move manually the carousel is not blocked.

  Open the scanner cover and cover less than one so you should see the toners.

  On the left side of the black frame, you will see an oval hole with a piece of white plastic on the inside.

  You will need to use something to press the white plastic piece, at the same time, push the carousel backwards, do not touch the toner however. It must be in good position to get out the toner.

  I've included a picture with the region, where to use the manual function of the printer.

  

  Make sure that the print queue is also allowed to leave, I saw this also cause the printer go in initialization.

  I can send a private message with some one more step to try.
  In the forum next to your handle name simply click on the envelope to see.

  If there is anything else I can help you, let me know. Thank you.

• IPad Wi - Fi for Color Laserjet MFP M177 pro

  Evil on the tray upward. The printer seems to require a network to connect wirelessly to my IPAD. But my IPAD works on 3G and is not part of any network in my office. I already have the IPAD to connect to an HP printer at home where there is a network, but not to my office. ive already got the HP eprint App running, but it cannot identify the printer, which is turned on (but requires for me to select a network). If someone can direct me as to how I connect my IPAD to my new printer MFP Pro Laserjetc wireless (no other way with an IPAD)? Mny tks

  Hello

  You must either connect the printer to your network via an Ethernet cable or wireless by running the installation on a PC, and then connect the iPad to the same network as the printer wireless.

  If you do not have a wireless network at the office you can also use Direct from the printer wireless capability by following these steps:

  http://support.HP.com/us-en/document/c03920612

  Shlomi

• LaserJet pro color mfp m177 do not print in color on a machine Windows 8.1

  I can print, but not in color.  Dell XPS 27, Windows 8.1.   Have re-installed and uninstalled the printer.  No change.  I can take the document to a computer of W7 and it prints beautifully in color.  Husband PC, also XPS 27 with W8.1, print in color.   Printer is connected wireless to the network.   The computers are connected to the same network.

  Results are the same when you print the word or directly from a web page using the print icon on the page.  I checked the settings, etc.

  Hi there, please go to start-Control Panel configuration-programs and features, make sure that the previous driver is completely uninstalled before installing the latest driver.

• HP Color LaserJet MFP M177 Pro: STATE of COOLING

  Help, please! Very urgent.

  My printer keeps going into the State of cooling.

  I did:

  (1) a good ventilation

  (2) plugged directly into a power supply.

  (3) downloaded the updated firmware:

  Hello

  I sent you a private message, please check the instruction

  I hope this helps you!
  
  Make it easier for others to find solutions, If my post has solved your problem, Please mark it as "accepted solution"
  
  +++ Say thank you by clicking on the star of congratulations in the post.
  
  Although I am an employee of HP, I speak for myself and not for HP.

• HP Color LaserJet MFP M177 Pro: Cannot download the software for HP Color LaserJet Pro M177fw MFP

  Hello!

  I can't download the software.  I tried several times and breaks download about a quarter of the way through (attached image).  I tried to restart my computer, updating my OS to the newest.  I read through other suggestions for blog without result.

  I also tried to download Easy Scan on the App store, but it will not find the printer / scanner.  In the meantime, I am able to print to the printer / scanner without the software.

  Help, please!

  Alex

  

  Hello.

  Try to install the following package:

  https://support.Apple.com/kb/DL907?locale=en_US

  Then add you printer in Printers & Scanners, be sure to select your printer model from the menu drop-down use.

  Then try to print and try to use HP Easy Scan once more.

  You can see any difference?

• HP Color LaserJet MFP M177 Pro: Out of the box: MFP 177fw do not print

  New printer will not print or copy.

  Print demo page produces a blank page with toner deposits very light on the paper down.

  Thought I would ask for help before I have ship back for another printer.

  Frankly I want to reship it.

  Chances are you can try this than the other and it still doesn't work and all that you are doing is wasting time.

  We could call the HP support and they will have you try all kinds of things and eventually they'll try to send you a refurbished printer to replace.

• HP Color LaserJet Pro M177: HP Color LaserJet M177 Pro not work small screen

  Dear Sir.

  using this printer can be 1-2 months.

  In the last time I see this little screen does not work, I mean the printer does print, scan but small screen does not.

  But if I reboot printer it works and show me the HP logo, and then when turn on it does not display all...

  Help, please

  Hi @Chumayu,

  Thanks for getting back to me.

  It would seem that something was wrong with the hyperlink.

  Please try either of these links:

  • http://ftp.HP.com/pub/softlib/software13/COL54052/kJ-141652-2/M177_Series_FW_Update-20150228.exe
  • http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Please reply to this message with the results. Good luck!

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.