HP Color LaserJet Pro M177fw: HP Color LaserJet Pro M177fw

Similar Questions

• Color LaserJet MFP M177fw Pro: installation of web services blocked to 'connection '.

  I'm trying to enable Web Services on this new LaserJet.  I am in the built-in Web Server page and the configuration of Web Services tab.  I clicked on 'Turn on' and it just keeps spinning in connection...

  DNS is 8888 and 8844

  All the other tabs work; It is connected to the computer and the Internet.  Help please?

  Thank you!

  Hi @crowndude,

  I see that you have problems with Web Services. I want to help you.

  I have provided a few steps to try to see if we can solve this problem.

  Turn off IPv6 on the printer.

  Go to configuration, network configuration, network, IPv6 Services and turn it off.

  This DNS works better for Laserjet printers. Please change the settings to see if this will help the printer built-in Web server.

  Preferred DNS address: 209.244.0.3
  Auxiliary DNS address: 209.244.0.4

  Power cycle the printer.

  If you still have questions, please continue with the following steps:

  Update the firmware of the printer by a USB connection. HP Color LaserJet Pro MFP Firmware update M177fw.

  Configure a static IP address for the printer. Proceed to Solution 3: printer of the assign a static IP address.

  Printer HP Color LaserJet Pro MFP M177fw and HP LaserJet Pro MFP M127fw and M128fw printers - printer does not keep the Wi - Fi connection.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• COLOR LASERJET MFP M177FW PRO: nto all 4 colors printing

  greetings to you all, I have bein using my laserjet color mfp printers pro m177fw very do well no problem, but all of a sudden it does not print colors, including black and I check all the settings and hey there all ok so guys please help me solve this problem

  Hi @B_J1,

  I read your post and see that you are not able to print one of the 4 colors. I want to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  HP Color LaserJet Pro M177fw MFP and printer HP LaserJet Pro MFP M127fw and M128fw printers - print a Configuration report.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  The problems of print quality for the HP Color LaserJet Pro MFP M176n and M177fw series printer.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  You use Genuine HP Toner?
  What are the levels of toner?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Color LaserJet Pro M177fw MFP: HP Color LaserJet Pro M177fw MFP is not not color copy

  Hello, I have a HP Color LaserJet Pro MFP M177fw, when I try to copy in color mode, the printer gives me the newspaper (on the LCD screen), color copy is limited. I did not have a password for the printer. and this error is seen when you use both scanner feeder and flat bed.

  I appreciate your comments and thank you in advance for your help

  Best,

  The gesture would be to try to restore the default settings of the control panel of the printer.  Conflicting configurations on disabling color copies would be destroyed and normal again.  Resets are normally under the admin menu or the control panel service.

• Color Laserjet MFP M177fw Pro: Cold Reset the printer

  What is the procedure for a cold reset / factory default for the HP Color Laserjet PRO M177fw MFP printer

  Hi @SkySoldier ,

  I see by your post you want than the reset of the printer. I'd love to help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the button below the thumbs up. If there is anything else I can help you, let me know.

  Have a nice weekend!
  Thank you.

• LaserJet MFP M177fw Pro: Problem of scanning color multifunction M177fw

  Hello

  I'm using a MFP HP LaserJet Pro M177fw in my office for awhile. I have no problem with printing and faxing. But I can't do color scans good I can do scans in grayscale at 200 DPI. I get the following error when I try to make a color scan.

  

  I use Windows 10.

  Any suggestions?

  Best regards

  YK

  @Silahtaraga,

  Thanks for the information. I would like you to go ahead and follow the steps below:

  Try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  Additionally, make sure that the Firmware is up to date, see here: get printer updates

  If you still run into installation errors, continue here: after Windows 10 Upgrade, printer problems

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• HP Color LaserJet Multifuncti: HP Color LaserJet all-in-one Pro M177fw

  Hello

  I bought a HP Color LaserJet Multifunction Printer Pro M177fw, I'm fine, but I discovered that I'm not in the automatic two-sided documents. You can purchase the optional kit? Let me know. Thank you. Benedetto Colangelo - Trento

  Hello @Benedetto0

  The M177fw does not support automatic duplex printing, but only two sides print manually via the pilot...

  Any automatic duplex unit is not available for the printer, not as standard or as an optional accessory.

  You can find the specifications for your pritner below, refer to the section "Duplex printing" such as:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/HP-Color-LaserJet-Pro-MFP-m177fw?JumpID=oc_r1002_usen_c-001_r0002#! & TabName = specifications

  Kind regards

  Shlomi

• scan to email on Color LaserJet MFP M177fw Pro

  I'm trying to download the printable 'Scan to Email' on my Color LaserJet MFP M177fw Pro, but he continues to throw an error?

  When I bought the printer (yesterday), I was told that I could put up to Scan in a document and have it automatically send as an e-mail message to a recipient.  How to achieve this?

  Thank you!

  Hi grahammccarthy,

  Welcome to the HP Support forums.  I understand that you want to know how to scan to email using your printer Laserjet Pro MFP M177fw.

  You don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to analyze.  There is a section called "How to scan with HP software" and there you can find a subsection entitled "How to scan to email.  It is in the subsection, you will find the instructions you need to follow to be able to scan to email.

  How to perform a scan: Windows XP

  How to perform a scan: Windows Vista

  How to perform a scan: Windows 7

  How to perform a scan: Windows 8

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.9

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Color LaserJet MFP M177fw Pro: Color LaserJet MFP M177fw Pro

  I have Color LaserJet MFP M177fw Pro and it is stuck on print fax. I restart the printer and print the fax even. I found a post and supposed to go ware closes so I did. Printer is returned to normal. Got another fax and the printer to print fax. I tried firmware ubgrade once again without help. Toolbox program HP device says 'Printing Fax Page 1'

  Also I can't receive any new faxes and print to the device.

  Hi @DDTKS.

  Welcome to the FOrums of HP's Support. I understand that your Laserjet M177fw is stuck to print a fax. I would like to help.

  I sent you the steps to perform initialization of the NVRAM via private message.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.

• HP Color LaserJet M177fw MFP Pro - support PostScript?

  Hello

  I am looking to buy a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I am deciding between the following models:

  HP LaserJet Pro 100 color MFP M175nw

  HP Color LaserJet M177fw MFP Pro

  PostScript support is important to me, and I know that the 175 has it.  However, I'm not sure I know the 177, even after digging through several web pages and documents.  Here's what I found:

  -The page of the main form for the 177 says that he accepts "Cffp.  I'm not familiar with this variant PCL, so I don't know how it compares to PCL5 or PCL6, etc..  I have been unable to find more information about "Cffp.

  -The 'Software' section of Page 2 of the PDF Datasheet for the 177 mentions the driver "HP PostScript".  This is the only place where I saw no potential indication that the 177 supports PostScript.  This article also mentions a driver "PCLmS".  I couldn't find more information about "PCLmS".

  -The user 's Guide the 177 refers only to PostScript in an article that refers to ePrint.  However, it does not imply that the 177 itself supports PostScript.

  -Page product specification (in the Support section of the HP site) for the 177 has a "Print Specifications" section which lists only "PCL3 GUI" next to "languages of device.

  I'm guessing that the 177 is not compatible PostScript, but someone has the more definitive information?  Also, is there a description of the Cffp / PCLmS somewhere?

  Thank you!

  Hi Clent

  Here is some information on both printers.

  Here's a url for the printer for Color LaserJet MFP M177fw Pro specifications

  http://support.HP.com/us-en/document/c03901180

  Data sheet also.

  http://www.shopping.HP.com/shopping/PDF/cz165a.PDF

  Fonts and fonts depends on fonts and fonts in OS.

  Print language

• Color LaserJet MFP M177FW Pro: 126 a Toner can be used with Color LaserJet Pro MFP M177FW?

  I recently bought a Color LaserJet MFP M177FW Pro and still have 126 a toner cartridges (magenta, cyan and yellow) for my LaserJet MFP M175 precedent. I can use them rather than the cartridges of 130a recommended?

  Hello

  Only 3 printers can use HP 126 has:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=4148379#! tab = compatible_hosts

  Kind regards.

• M177fw MFP: Color Laserjet MFP M177fw Pro do not leave the page logo star HP & energy and go to the home page

  I have a HP Color Laserjet Pro M177fw MFP multifunction printer.  When I power on, I get the HP & Energy Star logos on the touch screen of the printer, but then it crashes and the screen lights up.  My MacBook Pro will see the printer (I'm wired to it via a USB cable) and it will start to print, but crashes at halfway trhrough sending data from the computer to the printer.  Is there a way to reset the printer to its default settings (first anniversary)?

  Hi Audiomic,

  I can provide some measures that could help solve the problem.

  1. try to reset the printer. Powered on, unplug the power cord from the back of the printer, then wait 60 seconds. Reconnect the power cord to the printer and turn it back on the power. Wait for the printer to initialize.

  2. If the problem persists, try to download and install the latest version of the software package. The most recent update is 20160525.  You can find the update here. Click Download and follow the instructions to install the update via the USB port.

  3. If the update does not work, I recommend this HP forum thread going and asking that the support agent send you instructions to perform a NVRAM reset.

  This last step is the only way I know to do a factory reset if the screen is frozen.

• Color Laserjet Pro M177fw MFP: HP Color Laserjet M177fw MFP Pro cool mood after printing all pages.

  I bought Color Laserjet MFP M177fw Pro for only 3 days. From the beginning he said impression... mood of cooldown and take a long paus. This issue takes place after printing each page. I use HP Toners. And my related directly to the wall socket (Electric).

  Please help me. It is urgent for me.

  Thanks in advance.

  Hi Ryans,

  Please check private Message

  I hope this helps you!

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.