HP Color LaserJet Pro M252n: HP Color LaserJet Pro M252n duplex automatic does not

Similar Questions

• Oficejet Pro L7680 duplex printing does not work anymore

  I used duplex printing on my Oficejet Pro L7680 all-in-One because it was new, but for the last month it does not work.

  When you choose to print or copy double-sided, it then prints the first side of the sheet, rather than take this piece of paper in the duplex unit, it it spits and then displays a message that it is paper.

  I tried reseting the printer by pulling on the power cord and leave unplugged for more than an hour, but he still feels the same question. Yet once, this happens if I print from my computer or if I'm trying to copy copy double-sided, so I don't think it's a problem with the PC. But just to cover the basics, this printer is network installed a windows PC running Vista Home 32 bit, Vista 64-bit Edition and Windows 7 64-bit edition.

  Well, it's strange, it worked for 3 weeks and now it just started working again without doing me something for her. Very strange...

  But I guess anything that get the problem solved is a good thing...

• the color of the sites I visit does not change in firefox but changes in bing

  The color of the sites I visit does not change in the list of sites.

  I'm not able to find this feature Firefix 4, even though it existed in earlier versions.

  Pl help

  Make sure that you are not running Firefox mode of private - browsing using Firefox without saving history permanent.

  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck: [] "Permanent private browsing Mode.

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• macBook Pro 10.5.8 does not update Safari Firefox Google. Why? What should do?

  macBook Pro 10.5.8 does not update Safari Firefox Google. Why? What should do?

  You need to grade 12 to OS x 10.6.8 via DVD you can get here:

  http://store.Apple.com/us/product/MC573/Mac-OS-x-106-Snow-Leopard

  Full DVD 10.6.3 to 10.6.8 update via software update. Then either update to El Capitan if your hardware allows

  http://www.Apple.com/OSX/how-to-upgrade/?CID=WWA-us-KWG-Mac

  or if your hardware allows go Lion lion

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• Manual duplex printing does not work for LaserJet 100 color MFP M175a

  Hello!

  Windows OS 8.1. Printer LaserJet 100 Color MFP M175a. 61.108.8.10073 driver version date 2011 Apr 13

  1. after the passage on the checkbox "Print on both sides (manually)" on the tab "Final" of the print properties dialog box and
  print, dialogue with the instruction how to turn paper appears. Then the printer should print the odd pages, stop for
  turn the paper, and then continue printing even pages on the back of sheets of paper. But my machine print
  all pages sequentually sequentially 1,2,3,... without breaks. What is TI - my bug error or possible in driver?

  2 functions of the DeviceCapabilities API of Windows with fwCapability = DC_DUPLEX for this printer returns 0 (duplexing
  impossible). This value for any other HP printers, even without duplex automatic, always equal to 1 unit.

  Hi @Up205,

  I see by your post that you are having problems manually double-sided printing. I can help you with this.

  The software for this model on the 8.1 for Windows is the Basic Solution software and the driver. This solution of basic software provides printing and scan feature only. You download and install the latest drivers?

  HP LaserJet Pro 100 color MFP M175nw drivers.

  Ensure that the bidirectional Support is enabled.

  Go to the type (menu tiles) in "devices and printers" screen, select settings, click on devices and printers, click with the right button on the printer, start left click on properties of the printer, on the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  If you need help, let me know.

  Good day!
  Thank you.

• HP Color LaserJet 2840 MFP Pr: I've upgraded to Windows 10 now the scanner on my HP Color LaserJet 2840 printer MFP printer does not work

  I upgraded to Windows 10, when I tried to use my scanner, I get the message - the printer does not see the PC.   Is there a way to get around this?

  Hello

  First of all, remember to install the communication driver USB LaserJet of HP (DOT4) below:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=445197&swLangOid=8&swEnvOid=4192

  Know that basic scanning capabilities only are offered through Windows Fax and Scan and only via a USB connection, not the network:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03501661

• Download driver driver page for HP LaserJet Pro M201n hp support does not

  Met the error after downloading printer driver for HP LaserJet Pro M201n for Windows 7 on the official support of the HP page: the requested URL /pub/softlib/software12/COL55789/bi-134296-2/LJ_Pro_M201-M202_Full_Solution_14101-a.exe was not found on this server.

  What is c?

  Hi @ghforoiu,

  I see by your post that does not have the driver downloaded. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I met the same problem using Firefox. I tried to use Google Chrome and was able to download the drivers successfully. Please give it a try.

  If there is anything else I can help you, let me know. Thank you.

• Board color settings (global, shadows, etc.) does not?

  Can I use the color Board and change the different settings very well, but for some reason, it does not show me the degree and the percent at which each setting is set to.  For example, I can move the global setting, but it shows me the number that corresponds with how I've moved.  I feel there is an easy solution to this, but someone can help me?  Thank you.

  PPull down the separator between the Inspector and the timeline.

• HP color laser jet cm1312 mfp sharing does not work

  Hello, I have a problem.
  The this printer to connect to the server (windows 7 32 bit, latest driver).
  Other users (network) may not print, but after restart server, everything works...
  What is my problem? Help, please.

  Hello

  To understand the issue correctly, try the following:

  1. If all the shared PC are not able to print, check if you are able to print from the server PC.

  If print server as PC still work, there will be some communication issue betn the server and the other computer on the network.

  2. If printing from computer Sever also does not work unless you restart the server PC, it might be a problem with the spooler on the server or the printer driver. You can try to reinstall the printer driver and the reshare to PC network and check.

  3. this question could also arise from the printer itself. Tray to update the Firmware of the printer to the latest version and check.

  4. If the driver on the server is offline, try now to turn off the SNMP state:

  From the Windows desktop, select Start, settings, and then click Printers. The icon of the pilot series HP LaserJet XXX, right-click and select the Ports tab, check if the correct network (IP address of the printer) port is enabled in the list of ports, click on the button Configure the Port, in the Port Settings window, uncheck the box next to the option "SNMP status enabled" (disable), click OK to save the settings , click on apply and then click OK to exit the properties of the driver.

  See you soon,.

  Manjit

• HP LaserJet 6 p printer range does not print with windows 7

  I installed the drivers that came with Windows 7, but the printer does not print. I run the diagnostic tool; It removes the work and says it's fixed.  It is not the case. HP says they cannot help.   I love my 6 p and would rather not have to buy a new printer.  Can anyone help? Thank you.

  Windows 7 does NOT support printer HP laserjet 6 p.  It is a HP note:models 6L and 6 p in the LaserJet 6 series are NOT supported in Windows 7  I got and downloaded the driver on the Internet somewhere by typing: driver of HP laserjet 6 p.  You can check the box to add printers over the Internet.  I'm not looking for the process.  Try and I hope it helps.  In the meantime, I'm troubleshooting why my 6 p prints (parallel to 6 p and USB for laptop HP cable).  Don't forget the impression of 'biodirectional' is not checked in Ports (USB001, 2 or 3) place (lower-left) in Device Manager. Right-click on your printer, you will see 'printer properties '.  I say that linear, but you will get it.  Let us know.