HP Compaq 6005 Pro SFF PC, a student protected Bios password

Similar Questions

• HP Compaq 6005 Pro SFF PC: use reference dell 531 parts s in my PC HP Compaq 6005 Pro SFF

  I try and speed up my computer, I have a computer dell 531 s this works (vista). Hard drive crashed. I was hopeing I could use something out of it. This is for my HP Compaq 6005 Pro SFF PC, SG972UC #ABA... Thank you... Mike

  Hello:

  Compare the specifications of the two models, it seems that the only thing you can use the hard drive, what said you was not good, so it does not work.

  The 6005 Pro uses different memory (DDR3) and 531's DDR2, which does not in a DDR3 slot.

  The 6005 uses another set of AMD processors and that of your 531 s will not work in the 6005 Pro.

• HP Compaq 6005 Pro SFF PC: RAM-I let crucial scan my system

  Crucial scan says I can use DDR3 PC3-14900 • CL = 13 • unbuffered NON - ECC DDR3-1866 • 1.35v • 512Meg x 64... My computer has DDR3 PC3-10600 (1333 MHz)... I thought I had to say with my ram support due to the mobo and cpu speed... SG972UC #ABA, HP Compaq 6005 Pro SFF PC...  I have the chance to buy faster ram if it will work. Thanks if you can help!

  The B97 is not listed on pg 2 illustrated parts Guide.

• HP Compaq 6005 Pro SFF PC: Transfer motherboard... EXPERT NEEDED I GUESS!

  I'm building a new computer and I would put my motherboard in the case again until I get my new hardware... Will it work? Also can I use any cpu am3 with the stock mobo that attracts only 95w or less?

  Hello wanasemlike,

  It is the last processor of your computer information is supported.

  AMD Athlon II X 4 605th processor (2.3 GHz, 2 MB cache L2, HT bus 3.0).

  Concerning the transfer of motherboard, this mobo comes in a compact PC so be careful in selecting the cases that you will use.

  Concerning

• Caddy needed hard drive for HP 6005 Pro SFF

  I have a HP 6005 Pro small form Factor (SFF) PC that has no hard drive or caddy presents. Where can I get the caddy? I also have a 2nd hard drive can be added, what I have to add an additional HARD drive?

  Hello @bocajoe,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have any questions about adding an extra HARD drive to your PC HP Compaq 6005 Pro Small Form Factor. I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do to the company - Compaq, Elite, Pro PC.

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Compaq 6005 pro: Manual of the motherboard for a compaq 6005 pro.

  I need a manual for the motherboard for a compaq 6005 pro. No luck in my search.

  Hello

  http://static.highspeedbackbone.NET/PDF/HP%20Compaq%206005%20PRO%20Business%20pc%20Computer%20Maintenance%20&%20Service%20Guide.PDF

  Maintenance & amp; Guide service: HP Compaq 6005 Pro Business PC - removal and replacement procedures format microtour (MT) chassis
  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01869904

  Maintenance & amp; Guide service: HP Compaq 6005 Pro Business PC - removal & replacement of Small Form Factor (SFF) chassis procedures
  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01869966

  Maintenance & amp; Guide service: HP Compaq 6005 Pro Business PC - POST Error Messages
  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01869903

  Concerning

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• HP compaq 6200 pro sff: drivers missing

  good day to all,

  help with the following missing drivers.

  controller Ethernet (hardware id);

  PCI\VEN_8086 & Dev_1502 & SUBSYS_1497 / 03C & REV_04

  Pci\Ven_8086 & Dev_1502 & SUBSYS_1497103C

  Pci\Ven_8086 & Dev_1502 & CC_020000

  Pci\Ven_8086 & Dev_1502 & CC_0200

  In addition,

  PCI simple communication controller

  SM bus controller

  PCI serial port.

  The PC is HP compaq 6200 pro sff

  Windows 7 pro 64-bit.

  Thank you.

  Hello:

  You need these drivers...

  SMBus:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_88640_1 & swEnvOid = 4059

  Simple PCI and PCI Serial Port:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_138955_1 & swEnvOid = 4059

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_108131_1 & swEnvOid = 4059 #tab1

• Memory RAM replacement hp compaq 6200 pro sff

  I have hp compaq 6200 pro SFF, now has only 2 GB of RAM memory and I want to add more to it. where can I find what I need? I have a couple of old computers here, but need to know if I can use these memoirs RAM for this computer. I can't find it.

  Hello:

  Here is the link to the quickspecs for your model...

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04123261

  Info upgrade memory are on page 7.

  Note that you can install 4 x 8 GB PC3-10600 memory, even if the configuration table only 4 x 4 GB.

• Invalid electronic serial number after swapping out motherboard, HP Compaq 6200 Pro SFF

  Hello

  I have just replaced a motherboard under warranty and I try to find the utility to change S/N in the BIOS, have obtained a location for the equivalent laptop but can't find the PC version using a USB.

  I have CSN access, but cannot find the utility appropriate to effect the change.

  PC is:

  HP Compaq 6200 Pro SFF

  Any help would be appreciated.

  Thank you

  Darren

  [Personal information]

  Hello:

  Here's what you need to do... This model has no need to inventory number or serial number change utility...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• HP 6005 Pro SFF: Replace video card ATI Radeon HD 4200 graphics upgrade for HP 6005 Pro SFF

  I have a HP 6005 Pro SFF with a 240W PS, and I want to upgrade the video card.  It has an ATI Radeon HD 4200.    An HP Forum person (Paul Tikkanen) recommended an upgrade for a 6005 using a video card optional for the HP 6200 Pro SFF:

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439&cm_re=hd_6450-_-14-121-439-_-product

  Please confirm it also works for the 6005.  If I replace it, can I actually remove the Radeon 4200 and replace it directly at the space of the same card mother slot to save space of PCI Expansion slot, or do I use the expansion PCI Express 16 x slot?   If so, is the procedure for the direct replacement documented anywhere?

  Hello:

  The ATI Radeon HD 4200 Video on your PC is the graphics chip integrated according to page 14 of the quickspecs at the link below. In other words, the graphics card is a chip that is soldered to the motherboard.  It is not in an expansion slot.

  http://static.highspeedbackbone.NET/PDF/HP%20Compaq%206005%20PRO%20Business%20pc%20Quick%20Specs.PDF

  The dedicated PCI express x 16 slot should be empty now, and this is where you install the card I have recommended.

  I don't see why the HD 6450 work.  It works in the dc7800, dc7900, Pro 6000, 6200 pro, 8000 Elite, Elite 8100 and 8200 Elite business desktop PC.

  You just need to make sure that uninstall you the HD 4200 graphics card and the driver in Device Manager.  Also check the uninstalling the driver box.

  Also uninstall catalyst control center software in the Add/Remove programs in the control panel section, stop and disconnect the PC, install your new video card and the driver for the 6450.

  Here is the link to the service manual. See Chapter 2 pp 20-25 for the installation procedures card expansion, paying special attention to the info of PCIe x 16 slot.

  http://h10032.www1.HP.com/CTG/manual/c01870938

• GP Compaq 6005 Pro format microtour: Reinstall a computer format microtour HP Compaq 6005 Pro

  Hello

  I want to install Windows 7 on several Compaq 6005 Pro format microtour (VN797ET).

  I have product keys Windows 7 Pro to the labels on the PC, it also says OS: Win 7 to XP Pro.

  But the keys to Windows 7 should work for Windows 7 Pro?

  How can I get a W7.iso that runs on the PC. I tried the Microsoft Download page:

  http://www.Microsoft.com/en-us/software-recovery

  When I enter they key I get the following error;

  "The product key you have entered seems to be for the software that came preinstalled on a device. Contact the manufacturer of the software device for recovery options. »

  Can I download a HP image somewhere? These keys function with a generic W7 iso (sp1)?

  Hello:

  You will need to order a set of HP for your PC recovery media.

  If you live in the USA/Canada, call this number... 1-800-334-5144

  If you do not, I have this old list of numbers of support by country.  I don't know if all the phone numbers are more valid.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/business_desktops/6005us_332630_007.PDF

  Have the serial number of one of them handy to give to the customer service rep.

• HP Compaq 6000 PRO SFF: Need some drivers for this desktop computer

  Hello, I have a model # HP Compaq Desktop 6000 PRO SFF and I need drivers for it the following:

  PCI serial port

  PCI Simple Communications controller

  Trusted Platform Module 1.2

  Someone please help... Thank you

  You are the very welcome.

  You need this driver.  Install manually if auto installation does not work.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45367 .exe

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301