HP Compaq 6005: Windows Installation disc

Similar Questions

• HP15: Hard drive HP 15 '' have got damage. Can I have the HP windows installation disc?

  Hello

  Drive hard HP laptop 15 my son received damage after a small fall. I tried to reset the player, but that did not work. Can I have the HP windows installation disc?

  OK, great.

  As I posted yesterday, it is important to get the right of # model because the recovery media works on the model so that it is designed.

  To order the recovery media, click on the link below.  Select W8.1 operating system from the menu drop down.

  The link to the order recovery media is the last element of the page.

  http://support.HP.com/us-en/drivers/selfservice/HP-15-F000-notebook-PC-series/7137590/model/7311084

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.

• I tried to repair the boot from the windows installation disc, but it displays error bcd

  Initially, my pc has windows 7 Home Basic, but it comes with, intended education I installed ubuntu in there, now when I reinstall windows 7 on it, it shows error of bcd. then I tried to install it through the recovery of the dvd, but it won't help. now when I put the drive to install windows 7, it is not started, but shows me the error bcd. so I can't fix my computer with the installation disc .please help me. I'm really helpless here

  Hello

  It's not clear from your post: you have installed Ubuntu? If you do this, then start Ubuntu, and once he is insert your Windows Installation of DVD in your drive and double-click Setup.exe. From there, try and fix your Windows installation process. If Ubuntu is no longer installed, you can reload Ubuntu you can do the above process?

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Pro Windows installation disc 7

  Hi people.  Just got my Thinkpad Edge and I'm already tired of uninstalling all the bloatware.  Now in addition to this, the Windows updates fail to re-boot configuration part and I have to try again and again.  Is it possible to buy installing Windows Pro disc for my license?  I would like to do a clean install of Windows 7 Pro.

  clutchc wrote:
  So basically, without knowing the product key physical... no there is no way to install Win7 from Digital River download and activate it.
  Bad luck.
  (unless the pgm of installation would be ID it in the BIOS?)

  Not the case.  Read the info in the links (I think it's there...).  You are installing from a download of Digital River.  Use a random key of Win 7 borrowed from another installation that corresponds to the version you are installing.  He fails, but offers telephone activation.  You call and MS gives you a key to activate with.

  At least that's how they say it works.  Mighty strange.  And - it does that for machines to gain 8-> 7 downgrade rights.  You can downgrade to Win Pro 8 but not standard Win 8.

  Z.

• Vista \Windows\system32\winload.exe is missing, how can I get the Windows installation disc?

  I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »

  The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk.  I tried to identify if a recvery kit was available and it seems that maybe not.  What must I do to fix this?

  Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.

  You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836

• If I insert a Windows Installation disc in my existing PC, run a new configuration?

  I intend to install XP by converting the contents of the disc to an ISO and then mount it in VirtualBox. But my main goal here is when I insert the disc in my drive, it let me access my regular PC, and show the installation process?

  Thank you

  You can insert the disc and it will have no effect on your installation running. You will not be able to start the installation of Windows XP in Windows 7. If you install on a virtual machine, the program you ask mount you an ISO or select the installation source such as disconnection of your physical disk, then connect it to the virtual machine.

• Can I use a premium windows installation disc 7 that is for PC reconditioned refurbished Windows xp computer that has the same 32-bit?

  I have a Windows XP Professional and windows7 home premium which are the two renovated 32-bit PCs with installation disks... I want to install Windows 7 on Windows XP computer then tell me:

  Is this possible and if that is the case, what is acquired to make it work properly?

  Unfortunately no, you can't.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Windows installation disc

  Hello

  I have a hp g61, but by accident I deleyed my files so rang the help line and bought the hp recovery dics but when I put in my laptop, nothing happens I can get this work help

  Thank you paul I got my laptop thanks a lot for your work instructions

• How to get a windows Vista Home Premium 32-bit installation disc?

  My computer is an emachine T5086.  It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.

  Then, the computer restarts and asks me to install my windows installation disc for repairs.  F8 on reboot is not available as an option.  I don't have a repair option I turn on the computer and hold down the F8 key manually.  I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.

  How to make a windows Vista Home Premium 32-bit installation disk?  I have my product key. Or where can I get one?

  Hello

  There are different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://www.eMachines.com/EC/en/us/content/home

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• The clean install of Windows 7 Home Premium x 64 without installation disc.

  Hello

  I recently bought a Toshiba laptop with a Home Premium Windows 7 x 64 preload version.  It has not come with a Windows installation disc.  I want to reformat the hard drive and put on a clean version of the same operating system.   Right now my only solution is to find someone with a disk or an iso.  Which turns out to be harder than I thought.   Is it possible to make an image of Win 7 Win 7 without having to make a picture?

  I also own a copy of Windows 7 pro x 64.  Can I use this disc to install, with the key of Win 7 Home Premium?

  Thank you

  FatherFinch

  If you perform a "clean" of Windows 7 Home Premium installation, you will need to buy Microsoft Windows 7 Home Premium 64-bit.  Someone else using Windows 7 disk is not allowed under the terms of the license Microsoft Softrware.

  Q: I also have a copy of Windows 7 pro x 64. Can I use this disc to install with Win 7 Home Premium key? 

  A.   No

  Carey Frisch

• looking for windows 8 installation disc or ISO

  Hello friends,

  I'm trying to fix my sister in the desktop of the Act. This computer came with windows installation disc 8 and can not find the recovery partition, says that is no more. This computer seem to come with windows 8 already installed and more later put far to 8,1, because the product key failed with the CD that I have (which are windows 8.1).

  I am looking for the ISO of windows files 8 download and burn to a DVD and then install it on his computer.

  I was able to find a product key for this computer but impossible to verify what type of license is it? retail, oem, pro or home etc.

  Happy thanks giving.

  Hello

  Thanks for posting in the Microsoft community.

  Thanks glad you support team give by Microsoft.

  You can see the help article Microsoft upgrade to Windows 8.1 Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  For the type of product key, you contact the support team and check.

  https://support.Microsoft.com/en-us/contactus

  Hope this information is useful. Just reply to us with the State of the question.

• The installation disc could not be found

  I get the same message continuously when I am bootcamp Windows 7 on my iMac mid 2010.

  I have read through the other threads here and searched online and nothing that I don't seem to make any difference.

  I have a iso, tried to burn on an external drive and a FAT format USB key.

  Downloaded the package of appropriate support bootcamp for my system.

  Followed all the instructions on the help page of training camp, but still can't make it work.

  I am gradually abandoned so any help would be greatly appreciated.

  Chrischarge g ' Day,.

  Thank you for using communities of Apple Support.

  I understand from your post, that you have a problem installing Windows 7 on iMac (21.5 inch, mid 2010). I use Boot Camp dual-boot my system as well, so I know that it is important we have this installation problem solved. I have several things for you to try.

  First of all, it's a good idea to make sure you have a recent backup of important data from your iMac. The article below will help ensure that you have a recent backup:

  Use Time Machine to back up or restore your Mac

  Then, I see you are using Mac OS 10.6.6. Let us make sure that you have the latest version of the software installed for this OS (10.6.8). Please try to update by following this path: Apple menu > software update.

  Finally, it is important to respect the requirements and installation steps to install Windows 7 and older versions on your Mac with Boot Camp. The installation steps are unique depending on whether it is a new installation of Windows 7 or an upgrade installation of Windows 7.

  Perform a new installation of Windows 7

  Follow these steps if you install Windows 7 on your Mac for the first time.

  1. Start your Mac in OS X.
  2. Use the tables at the end of this article to make sure that you have a Mac that takes in charge the version of Windows that you are installing.
  3. If your copy of Windows 7 has come on a DVD, create a disk image of the installation disc for use with Boot Camp.
  4. Connect a 16 GB or more large USB flash drive you want to erase. Leave this connected to your Mac, flash player until the Windows installation completed.
  5. Open Boot Camp Assistant in the Utilities folder (or use Spotlight to find it) and click on continue.
  6. Select only the options to create a Windows Setup disk and download the latest version of Windows software Apple support. Then click on continue.
     
  7. Insert your Windows installation disc, or choose your ISO Windows installation, then click on continue. Boot Camp erases your USB and he prepares for the installation of Windows. Once the flash player is prepared, close the Boot Camp Assistant window to exit the application.
  8. Use the tables at the end of this article to find that Windows supports the software (drivers) you need for the version of Windows and the Mac you're using.
  9. Click on the link in the table to download related software.
  10. Once the file is downloaded, double-click it in the Finder to decompress (unzip) it.
  11. Open the folder that results. Look for the following files in this folder and drag them to your USB Flash drive. When you are prompted if you want to replace the existing items on the flash drive, click Yes.

      $WinPEDriver$ (file)
      AutoUnattend.xml
      BootCamp (folder)

  12. Open the Boot Camp Assistant again, and then click on continue.
  13. Only select the option "Install Windows... or later."

  
  
• Click on install, and then follow the prompts on the screen to re-partition your hard drive and install Windows.
• When you have completed the wizard, your Mac restarts with Windows Setup. When you are asked where you want to install Windows, select the BOOTCAMP partition, then click on drive Options and format your Boot Camp partition.
• Follow the prompts on the screen to complete the installation of Windows.

Perform an upgrade of Windows 7 installation or an earlier version

You can upgrade to the existing installations of Windows XP or Vista to Windows 7. You need at least 10 GB of free space on your Windows partition.

1. Start your Mac in OS X.
2. Use the tables at the end of this article to make sure that you have a Mac that takes in charge the version of Windows that you are installing.
3. Download software support for Windows (drivers) bound to the table, or locate the OS X Install or the restore disc supplied with your Mac so rated.
4. Decompress (unzip) download it and place it on a USB drive formatted in FAT (MS-DOS). Let this flash drive connected to your Mac during installation.
5. Start your Mac from the version of Windows that you currently have installed.
6. Use the Windows Installer to upgrade to Windows.
7. After Windows Setup is complete, your Mac starts in Windows. In Windows, open the file "BootCamp.exe" on your USB stick or the installation disc supplied with your Mac. Follow the prompts on the screen to install the related drivers for your Mac.

After the driver installation is complete, connect to Windows to start using it on your Mac.

Have a great day!