HP Compaq 8100 Elite CMT: Need power supply 400w replacement.

I ordered a refurbished HP Compaq 8100 Elite CMT Quad Core i7-860 2.80 GHz 8 GB RAM 1 TB HARD drive

And I ordered a gtx geforce 650 need a 400w power supply. I don't know on what power I need command that will fit in this. Can someone help me?

Use an adapter for your 2nd diet, it's what has worked for me.

http://www.eBay.com/ITM/like/111284841995?lpid=82
5.00 after all my research I've found the answer, it's not pretty, but it works.

Plug one of your SATA power to branch (from your current diet) on the cable resulting, plug your new power supply ATX ATX plug adapter and you're good to go. When your old power supply switch on the adapter will turn on your new, it's great.

Add2PSU is an adapter popular http://www.add2psu.com/

You could buy a dedicated power supply if you can find one, but I recommend not, they are expensive, make a lot of noise and heat.

It was a nightmare for me and I don't want other people to have to go through what I did.

Tags: HP Desktops

Similar Questions

  • HP Compaq 8100 Elite CMT: Updated memory 8100 Elite CMT with 2x4gb TwinMos 512 x 8

    Hello. I'm new here.

    Of after the plug technical QuickSpecs, I recently bought 2 x 4 GB of "TwinMos PC3 10600 4 GB DDR3 1333 Mhz CL9 U-DIMM ' memory. The chip configuration is 512 x 8 single sided. When I put the memory inside, my PC will boot only until the Windows logo and keeps on rebooting. I tried the two modules together and separately, black fill slot DIMM1 still. But the problem persists.

    After much research on the internet, I found the idea that it could be due to the configuration of the chip 512 x 8.

    Is there such a question? How can I solve this problem. I plan to uprade max 16 GB, and it's the only 4 GB DDR3 1333 MHz available here.

    Thank you for your time.

    Hello:

    It's the memory that I used on my 8000 Elite that uses the same specification of memory...

    This memory has 8 small black chips on each side of the chessboard (16 in total).

    http://www.Newegg.com/product/product.aspx?item=N82E16820231422

    I would say that the memory you bought is too high a density for the PC to manage.

    The memory I bought works fine in my box.

  • PC HP Compaq 8200 Elite CMT: Replacement of the SSD HARD drive and Recovery Options

    I have a PC HP Compaq 8200 Elite CMT I went recently to drive HARD original for one SSD of 850 Evo from Samsung using Samsungs cloning/copying software. Everything went well and the PC is in use today. I do not see the partition D: Recovery on this machine more well, so I think this has not copied or was lost. I still have the disk that was replaced.

    I was wondering if there is a way to replace HARD drive like this with an SSD and everything by keeping the system recovery feature that was on the HARD disk, and if a set of system recovery disks of before installing SSD would continue to operate, or if I need to create new ones, and if I CAN create new ones.

    rgoodrich

    I did what you want to do (for example, to replace a disk with a DDI) and was able to retain the function of HP recovery - but it's because of two important facts.

    First of all, I used a DDI with the same capacity as the original HARD disk.  This is important because if you use a smaller SDS, the HP recovery feature will no more work as a reset begins with reformatting the drive and recreate the original scores - which will fail if the disc is too small.

    Second, I use Macrium Reflect product to 'clone' the HDD to the DDI, which means, he made an exact copy of the partitions on disk on the SDS.  So, when I swapped drives, the PC restarted without any problem.

    People have posted here on the use of the software from Samsung, and they seem to have problems restarting after use and (apparently) with successful copy from disk HARD original in the new SDS.

  • PC HP Compaq 8100 Elite: How can I add to my PC HP Compaq 8100 Elite HDMI output

    I would like to use my PIP (picture in picture) of HD television feature newly acquired as a monitor for my PC HP Compaq 8100 Elite, which has no HDMI output. The PIP function requires a HDMI input.

    Is there a map update I can add to the PC HP Compaq 8100 Elite to provide me with HDMI?

    At any time.

    I am pleased to have been of assistance.

    There should be a driver disc in the box.

  • Card wireless for Compaq 8000 Elite CMT PC

    I bought a PC given to nine Compaq 8000 Elite CMT. It has Ethernet connectivity, but not wireless I can say. It has 4 slots for pci (?) cards. (Sorry I am a newbie) Is this compatible tower with a wireless card and if so which one should I buy? Thank you very much!

    Hello:

    I would just get an external usb wireless adapter.  No muss. No fuss.

    If you are determined to buy into the internal card, one made for your model.

    http://www.Amazon.com/HP-FH971AA-wireless-PCIe-card/DP/B001GV2320

    HP features on the map...

    http://h30094.www3.HP.com/product.aspx?SKU=3884872

    I launches wireless adapters external USB to dual band on my HP dc7800 CMT, 8000 Elite CMT and 8200 Elite CMT.

  • Cannot install XP on PC minitour Convertible HP Compaq 8100 Elite

    I can't install XP from CD to PC minitour Convertible HP Compaq 8100 Elite.  How can load the updated drivers for chiipset on the XP installation program?

    Hi Emily Ho,

    ·         What happens when you try to install Windows XP on your computer?

    ·         You try to install Windows XP from a disk of resettlement or a recovery disc?

    To update the chipset drivers, I recommend you contact the manufacturer of your computer for assistance.

    Reference: Install, reinstall, or uninstall Windows

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer

  • HP Compaq 8100 Elite SFF DMI tools

    I'm after the program tools DMI for HP Compaq 8100 Elite SFF. Can someone help me please?

    Hello:

    Here is the support page for your system:

    http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&TaskID=&prodSeriesId=4098436&prodTypeId=12454

  • I need power supply for HP Z220 CMT workstation up to 500 watt

    HI everyone I want to improve my diet is 400 watt, this does not work with my new graphics card, it's Asus GTX 770 Nvidia GeForce DirectCU II OC 2 GB GDDR5 he needs a minimum of 500 watts...
    Thank you very much for everything give me it please link or model power supply for hp workstation z220 up to 400 watt.

    Hello:

    Power supply in the z220 belong to someone, which means that you can not install any other food but the 400W provided by HP.

    You can also ask your question on the HP Business Support Forum - z section of jobs to see if anyone knows if one different PSU from another series of z that Workstation will work for your model.

    http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U5nJ2f1OXGg

    For example the z600 has a 650W power supply, but I have no idea if this P/S will work in the z220.

    Perhaps someone on this forum will have some alternatives for you, but don't get your hopes up.

  • Compaq Mini 110: Polarity of power supply jack

    Hello

    I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

    Here is the Service Manual:

    Manual

    See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

    He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

    The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

    The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

    If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

  • HP pavilion elite hpe-035sc: power supply wattage

    Hello

    I have a hp pavilion elite hpe-035sc

    Product number: VS311AA

    I7 870 2.9/8 GB ram/500 GB

    power supply: 460w delta electronics dps-460 DB A (it has a connector 6 power pins)

    I recently added an asus gtx 550 ti and it worked

    I'm worried about the power supply, do you not think that it is enough

    checked the power supply and I found:

    max power: 460w

    power combined 12va + 12vb + 12vc equal to 385 W (it does average?)

    THX

    It should not be any problems with the installation at all. Just do yourself the favor of not not overclocking the card.

    Delta POWER supply has enough good specs for a mainstream card like the one you have installed.

  • HP Compaq 8100 Elite: Video unrecognized card in PCI-Express x 16 slot for security

    I disable the PCI Express connector in the computer - security - Slot Configuration on BIOS.

    I don't know that my card on Board did not work and now machine does not start, machine beeps 6 times (error video card).

    I can't access the bios.

    I try to reset the CMOS, remove the Green rider, remove CMOS battery, press the button within 10 seconds, press the power button (to remove rest of energy.

    But none of it works.

    Can someone help me?

    How can I reactivate PCI Express x 16?

    Hello:

    If your integrated graphics card does not work, and reset the CMOS does not work, you can try putting the PCI express x 16 video card, you now have in the location PCIe White x 4 slot (slot next to the slot PCIe x 16 black white video card) and see if you can get into the BIOS to change the PCI x 16 setting.  It might work in the x 4 slot.

    If it does not, you will need to install a video card PCI (the one that goes in one of the white PCI slots) and use it to get into the BIOS, so you can change the settings to enable the location of PCIe x 16.

    So see if you can find a cheap, used, video card PCI on eBay, and should allow you to have the video again.

    You should also make sure you have removed all the connections of the computer when you reset the CMOS (all cables, power supply, mouse, monitor, etc.).

  • HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card

    Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer.

    From what I see, the motherboard has a PCIe and two PCI card slots.

    Computer model is XL510AV

    Any help is appreciated.

    Hello

    The following can help:

    http://www.StarTech.com/au/networking-IO/adapter-cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-card~ST1000BT32

    It has 2 brackets for standard and one for the low profile, you can swap around.

    Kind regards.

  • ENVY 700-327c: need Power Supply amperage on + line 12V

    I want to install a discreet graphics card in my new DESIRE c 700-327, who has a power of 300 W.  I need to know the available amps on the + line of 12V of power supply of the stock so that I could either one) choose a power card that works with the original, or b) improve nutrition.  Anyone know if the upgrade of the power supply will void the warranty?

    When in doubt, try the simplest thing first - look!  On the side of the PSU contained the information I wanted, unlike the HP PSU on my units of office earlier.  + 12Va - 12A line and + 12Vb line - 16A.  Don't know what line feeds the PCI-E slot, but neither is sufficient for the card I want to add.  Even my old EVGA Nvidia-powered card requires 18A on the + 12V line when it is matched witn an i7-4770.

  • Compaq Presario 2034NX. N power supply video card update

    I have a Compaq Presario 2034NX and want to get an upgrade of the installed video card (for a HDMI output, etc.).  I know that I have to spend my diet as well, for new power requirements.

    I am interested in (after-sales) part 3 parts, not "genuine HP/Compaq", to save costs on this box of 7 year and longer.

    (A) what version of PCI-Express is the slot on the MBoard?

    (B) what form of power factor should be purchased for?  ATX?  12V?

    (C) is there a special condition of type MOE for video work in Compaq Presario PCI-Express slot card, or will more 3rd party (after-sales) cards work?

    Thank you!

    Hello

    Is the Compaq Presario PC?  If Yes, then put a standard size ATX power supply will work as well as several video cards PCI-E x 16.

    Most of NVIDIA video cards require a minimum of a 300 Watt power supply.  Most of ATI video cards require a power supply of + 400 watt mimium.

    1 HP didn't post the version of PCI-E slot, but I suspect 1.x. It should support most of the cards PCI-E 2.0 with a few exceptions.

    2. a stand size ATX power supply will fit (5.5x3.4x5.9).

    3. the video card chosen must be associated with a power supply to support its power requirements.

    How much budget do you see for the video card and the power suppy.  You have special requirements of video connection? (HDMI, DVI, VGA)  What applications are you planning to use with the new video card?

    Open your PC and a few measurement in parallel with the PCI-E x 16 slot to see how long of a video card will fit. The adjacent slot on the PCI-E x 16 slot must be vacant if a larger video card is being considered. Look at the motherboard, and ensures that the components on the motherboard will not interfere with the installation of the video card.

  • HP Compaq 8100 Elite SFF: Upgrade 8 GB to 16 GB

    Hello everyone

    I wanted to know if someone could send me a link where I could buy RAM (from amazon, Ebay,...) which would be compatible with my computer.

    I bought so much ram (4x4Go) with a different frequency and CL, and none of them work. My computer beeps (with a red led) or it starts but stucks in the logo of the window.

    I checked on the website of intel: http://ark.intel.com/fr/products/43550/Intel-Core-i5-660-Processor-4M-Cache-3_33-GHz

    And even if I buy the RAM at 1333 Mhz and 4x4Go I have always the same questions.

    I want to say that I do not see where I made a mistake. Is it because my power supply is not powerful enough? I got this pb

    Thanks in advance for any advice or links (and sorry for my bad English, I'm from France)

    @SirPlease, welcome to the forum.

    This is the memory that is advised by Crucial memory.  If their programme recommends the memory, it is guaranteed to work or they will replace it free of charge for you.  They make good memory.  If you have any other questions, you can contact their Technical Support.  They have always been very helpful.

    In addition, if you want to speed up your computer even more, you should look at the SSD they recommend.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

Maybe you are looking for

  • G6-1b53ca Pavilion: pavilion g6-1b53ca network driver

    Hello! This is my first post and I have no doubt that one of you has informed the guys will be able to help me!  I reinstalled win7 Home premium & was surprised that some drivers were missing. I am unable to get online without network driver.  HP Pav

  • Using the E2000 as a wireless bridge

    After informed that I can not use the AP I bought yesterday as a bridge, I decided to get an another linksys E2000, as the guy in the shop told me that I can throw in for sure bridge mode. Now, like I do for the first time, and my English isn't the b

  • Shell HWDetection glitch

    I am currently having a problem with my Shell HWDection service, it's a minor, but a problem of winder. Is what is happening, when I start my PC first and open 'My computer', the address bar, and my cursor blinks once every 2 seconds. I found, thanks

  • Error of reconstruction recovery environment

    I completely formatted and installed Windows 8.1 and upgraded to Windows 10. And today, I have installed Dell backup and restore. After I clicked on the system backup in the backup menu it says that "We have detected that your recovery environment is

  • 964 all-in-one work on windows 8.1?

    It will be possible to use my all-in-one printer 964 with my new computer with windows 8.1?  What I can set it up for that it works? Thanks in advance for any response.