HP Compaq and Dell Analog monitor compatible?

I wanted to add that I also tried to pass the power to the monitor, computer cords and also VGA cables and nothing has helped so far.  I always get the saving mode on my Dell e193fp analog monitor.  My Hp compaq 5750 is loading windows xp, and I hear music... just no activity of the screen except "power saving mode hit any key or move the mouse.  Two of these units have not been used in a while, the office and the monitor have been inactive for more than 6 months.  If I disconnect the vga monitor, the power button cable transforms whenm amber green verses he is hung up to the red, white, gree, box blue 'self test' floats on the monitor.  I am unable to get one of the buttons before you take me to a menu on the monitor or the other.

lalea878 wrote:

I have it connect to the VGA port on the back of the HP compaq dc5750 Small Form Factor desktop computer... 15-pin.  The dell monitor has only a port... No. vga other ports except for power on the dell monitor.  HP compaq SN # {removed privacy}.  I've never hung a monitor up to a video card and didn't know that I could plug the monitor directly into the card?  I know not where the map is I have opened the HP and do not see it, but am not familiar with it.  This unit has a video card?  If so, how can I connect Dell e193fp monitor without using the VGA port?  Maybe the VGA port is disabled because my acer does not work on this HP compaq but works on my other HP compaq dc5750 SN #{removed privacy} / windows 7.

THX

Laura

Connection cable vga card screen depends on whther or not your PC is configured with a video card. It is not necessary to open the PC. Just look at the back of the PC. If there is a card, it will be in one of the slots instead of the bottom basket I/O headers (as in the picture in my previous post).

Test the display on another PC or laptop to test the display and cable. This is the method of troubleshoting simpleest. If it doesn't, then the problem is with the display or vga cable.

Tags: HP Desktops

Similar Questions

  • Computer laptop HP/compaq and Dell computer

    I just found out that my Windows 7 did not come with a pre-installed media player. (I've been to places that I would not have been)  Infact, I don't have her no more. What can I do?  Is it possible to install a virtual or do I need to buy a new laptop? I also have a Dell (that big) that I bought at Wal-Mart and there is no noise either. No longer buy my computers and laptops at Wal-Mart!

    Thank you, Louise

    Hi Louise,.

    ·         Did you do changes on the computer before the show?

    ·         You receive an error message?

    Windows Media Player is a multimedia player preinstalled with Windows. You can follow the methods and check if it helps.

    Method 1: You can get Windows Media Player for Windows features turn on or off.

    If you go to Control Panel, uninstall a program, click Windows turn features on or off.  The title of multimedia features, you can uncheck the option for Windows Media Player.  I have this, restart, and then return to this screen and recheck the feature to reinstall.

     

    Turn on or off Windows features

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

    Method 2: Try the SFC (System File Checker) scan on the computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3: For any problem with Windows, you can read the following article and check if it works.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

     

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

     

    I hope this helps.

  • HP Compaq desktop and dell monitor analog compatibility

    Windows XP-I have a desktop hp compaq dc5750 small form and an analog e193fp dell monitor.  I save mode only on the monitor of power and we have tried resetting the bios, disable the monitor works as well as the computer.  The monitor worked on another computer and I also tried a work on the compaq, an ACER X23W monitor and it will not work on compaq desktop either.  Acer has both vga and dvi inputs, so I think it's the video card but not sure?  Help!

    HP desktop computer had not served for a long time.  I thought about it.  I connect the monitor Dell on the VGA of the computer port as the monitor dell had no DVI port.  There was a video card in the HP desktop computer this way too the VGA port, so I removed the video card and the VGA port has been enabled.

    Thank you

  • Samsung and Dell monitor questions

    Hello:
    I had a given PC new and works fine, but when I hooked up with monitor with Samsung, a floating message popping up in the middle of the screen... "Not optimum mode, recommended 1280 x 1024 60 Hz Mode" and the screen empties a few minutes later. When I tested with another monitor with Dell, there are no floating message and gets a good quality screen that shows the Dell monitor is compatible not compatible Samsung to PC refurbished.

    Monitor Samsung was hooked with two different PC KVM switch, and no problem with them.

    Is there a way for me to do the given PC replacement compatible with monitors, "Dell" and "Samsung"?

    Thanks for any help in advance.

    "" floating"message popping up in the middle of the screen"

    "Not optimum mode, recommended 1280 x 1024 60 Hz Mode '"

    Your Samsung monitor is a type of format of 4:3 image, that's why she asked '1280 x 1024 60 Hz '.

    Your video card is NOT defined for it. How to change the settings:

    http://www.SevenForums.com/tutorials/256-screen-refresh-rate-display-settings.html

    See above with the Dell connected monitor. Set it to 1280 x 1024 at 60 Hz, and then connect the Samsung monitor and see what happens...

    Type of form factor small PC are not the easiest machines to be upgraded, especially regarding video cards. I wouldn't go this way if I were you...

  • How to connect 2 Dell U2415 monitor on the docking station in combination with a Dell Latitude E7450 processor and controller

    Hi guys

    hope you can help me out here. I plan to buy some E7450 processor and controller of Dell's Latitude for our company with a docking station and some Dell Ultra Sharp 24 monitor - U2415. Aims to use the E7450 processor and controller with the dockinstation and connect 2 monitors U2415 of Dell. the issue here is. What type of cable do I need? should I buy 2 normal display port cables? It resolution things to work with this combination?

    Here the link of the monitor

    http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&CS=hkdhs1&l=en&s=DHS&SKU=391-BBUW&redirect=1

    here some specifications of the dell Notebook printer

    Fix. You can also ask users on the laptop Video board on the platforms they use.

  • Although it is the dell DELL SAS business class model, can I buy a 600 GB 15.7 k sas 3.5 Cheetah? I could put any 15.7 k sas model in a dell and it is not compatible.

    can I buy a 600 GB 15.7 k sas 3.5 Cheetah without having the business class dell model?  I could put any 15.7 k sas model in a dell and it is not compatible.

    any help would be greatly appreciated as im new too servers.

    You can, and it can work properly.  All certified disk includes the risk of bad contact with the controller.  So, the answer is 'yes', but at your own risk.  Dell will also help you solve the problems of storage without certified readers, so if you go credits/retail, get ready to make your own troubleshooting - or be able to make experts if necessary.

    You may NOT USE the SME players on the controllers of the company although.

  • Windows 7 does not recognize my Dell 2407WFP monitor - only as monitor not Plug-and-Play credits.

    This monitor is able to execute the resolution 1920 x 1200 and it worked well on the same laptop Dell Latitude D820 under XP Pro SP3. However, Windows 7 does not recognize the Dell Monitor (shows as non-Plug-and-Play monitor credits) and will go no higher than 1600 x 1200. The monitor on the laptop will run in 1920 x 1200 and also 1920 x 1200 poster XP running inside a virtual machine, so the problem is with Windows 7 not properly recognizing the Dell 2407WFP monitor in VGA mode. All other operating systems work very well to support the material properly.

    The laptop is running a NVidia Quadro NVS 120 M map. I tried several versions of Vista Dell drivers (do not have for Windows 7 - therefore Dell is not to follow). NVidia has no drivers for this card because it specially designed for Dell and all pilots must come from Dell (new Dell doesn't help here - I know that Windows 7 was just recently released but there are important suppliers for some time. Thought Dell was big by taking charge Microsoft with their business line of products but I think that even they cannot follow.

    It seems that the problem is also Windows 7 is not correctly identify the Dell monitor and many other monitors as well. Unfortunately, I doubt that this issue will never be resolved by Microsoft. I have yet to see that all the issues MS resolved long. I begin to see the truth in the last pub in Apple vs MS on television. Well the time to upgrade the new hardware.

    If anyone has a suggestion or a solution to solve this - I'm all ears!

    Don

    wait until that Dell publishes drivers for win 7 or you can contact them for the same thing.

  • connect AC511 SoundBar hollow hub USB of Dell U2414H Monitor

    Hello

    I m ussing U2414H monitor (over HDMI) and currently got the SoundBuffer for she.
    I understend that connectign the Soundbar in the monitor does no point but it is possible to
    link to the monitor to the PC USB hub and then connect media devisess (bar sound, usb, headphone, usb, mouse etc.) directly on the screen?

    And in case where possible which cable / slot I use to bridge the gap.

    Thank you

    Yes possible to connect the hub on the screen but you then attach a standard USB cable to the Hub on the monitor at the back of the PC.  Its the same B cable that is used for printer A/USB cable etc.  You must make sure that windows is set to sound on USB Audio not the analog channel output.

    Learn how to configure and connect your monitors, set the parameters of resolution, find drivers and updates and other useful resources.

    To learn more

    http://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_Display/

  • MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

    MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

    Doesn't look like 4K is a good option.

    /macbook-pro-retina-display-how-to-manually-switch-http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

    Graphics.html #extdisplays

    Built-in display: 15.4 "Widescreen Native resolution: 2880 x 1800
    Details: This model has a screen 15,4 "color widescreen LED backlit with IPS technology with a 2880 in native resolution from 1800 to 220 DPI (178 degrees viewing angle). It also supports of the resolutions on the scale of 1920 by 1200, 1680 by 1050, 1280 by 800 and 1024 by 640.

    See also: how can you 'strength' or 'hack' the Retina Display MacBook Pro models running at the native resolution or otherwise more on screen that adapt default?

    2 screen support: Double/mirror *. 2nd Max Resolution: 2560 x 1600 (x 2 *)
    Details: * This model supports a simultaneous maximum resolution up to 2560 x 1600 on two external displays via Thunderbolt. Alternatively, it can support a single screen up to 2560 x 1600 per Thunderbolt and one display up to 1920 x 1200 through HDMI. Although it can theoretically supply all the three external displays, such as confirmed by a useful player, it runs too hot with three connected screens.

    http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.7-15-early-2013-retina-display-specs.html

    Although I think I read some hacks to make 4 K @ 30 fps.

  • Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

    Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

    Hello stevesch

    first see : problem with Firefox going transparent troubleshoot and find a solution

    then with patience to see:

    questions/940393

    questions/940389

    questions/940374

    questions/940377

    questions/940384

    questions/940395

    Thank you

  • Measure the time difference between a digital output and an analog input that responded to the questionnaire

    Hallo,

    I use the following system:

    • OR PXI-1044 with controller NI PXI-8109

    • OR PXI-2564 switch module to turn on the monitor of my test device

    • Data acquisition multifunction NI PXI-6259 to measure the signal that responded to the questionnaire jump

    The two cards are the same - PXI trigger bus. For both, PXI-2564 and PXI-6259 I use DAQmx to set the reading and writing of the channels.

    Now, I want to measure the time between the digital output, my unit turns and the analog input, which measures the response of my system.

    I can't do work by myself, please help me!

    I thank Ludwig.

    Hi Ludwig,.

    If you can't give us any VI we have difficulties with to help you.

    Because I Donat knowledge how your program is mounted it is not easy to know where you should enter signals.

    Here's a question similar to yours:

    http://forums.NI.com/T5/LabVIEW/best-way-to-measure-time/TD-p/178704

    and 2 external links:

    http://www.ehow.com/how_8698983_measure-time-LabVIEW.html

    http://objectmix.com/LabVIEW/385152-how-can-i-use-LabVIEW-measure-time-between-analog-pulses.html

  • SR1000 controller multimedia Audio and video controller (VGA Compatible)

    Hello

    I have a Compaq SR1000 and look for drivers for:

    Video controller (VGA Compatible)

    Multimedia Audio Controller
    SM Bus controller

    I visited the site of Compaq and HP for the drivers but they all list the following computers:

    • Compaq Presario SR1000IL
    • PCCompaq desktop Presario SR1000T (P8657H)
    • Compaq Presario SR1000V (P8657F)
    • Compaq Presario SR1000Z (P8657J)
    • Compaq Presario SR1000Z (PU026AV)

    I tried to download drivers from the SR1000IL for my SR1000, but none worked.

    Any help would be greatly appreciated.

    Thank you.

    @Freddie09

    ADI SoundMax:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&prodNameId=316715&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=hd-17950-2

    Intel graphics card:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&prodNameId=316715&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=PSG_I23037-107909

  • Driver Windows XP for Dell E176FP monitor

    Can someone tell me please the generic Windows XP driver for a Dell E176FP monitor?

    Hello

    1. what exactly you face the issue with drivers?

    2. you receive an error message?

    I suggest you contact the computer for drivers making.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

    I also suggest you to see link and check.

    How to obtain the latest driver for your Dell printer updates.

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266495#driver-update-2

    Reference Dell E176FP Flat Panel Monitor

    http://support.Dell.com/support/eDOCS/monitors/E176FP/en/index.htm

  • Dell 2000FP monitor

    Hello

    Our laboratory has recently bought a Dell Precision 650 workstation with
    a LCD from Dell 2000FP monitor. We have installed our cards DAQ, a PCI-6733
    and a PCI-6120 and everything seemed happy. Is the PCI-6733
    connected to our support by the CA-1000 and the PCI-6120 is connected by
    a BNC-2110.

    We were testing the configuration and noticed that there was a DC offset of
    about 50 mV when monitoring of channel 0 of the PCI-6733 on a scope. The
    lag was present on all output channels. No LabVIEW program
    were running and no signals were sent. After trying a few
    things, we turned off the monitor and the offset disappeared.

    We then tried to connect the monitor to a different outlet. We tried
    using on-screen RGB connection. We tried to use the DVI
    c
    connection of the monitor. We tried to change the position of the
    monitor. Nothing worked and the offset remained. We have also
    to reproduce this offset using our old DAQ with different computers
    DAQ cards and different graphics cards as well as the LCD display.

    We then connected our old CRT monitor and the gap disappeared.

    Everyone has problems with LCD screens? Someone at - it
    experienced similar problems with this particular model, the Dell
    2000FP? It is hard to believe that the offset is caused by the monitor
    but all our tests so far have shown that it is indeed the case.

    Thanks in advance,

    Brian

    Brian,

    I've never experienced this problem, and I certainly used LCD monitors with DAQ systems. Are video cards you are using PCI or AGP? If you only tried PCI video cards, and your motherboard has an AGP slot, I suggest to see if an AGP video card resolved the issue. In addition, if you move the LCD more away from the PCI-6733, is assigned offset?

    Spencer S.

  • X 220 and an external monitor FHD?

    Hello

    I really like x 220, but also heard that the D - sub port can give a good display quality on large screens, say 1080 p. It is said that the sub - D cannot provide enough bandwidth or something like that.   1366 * 768 being the only option, I'll probably need an external monitor to deal with my work (not graphic-heavy tho, so integrated map is correct, and FHD is preferred for the films ).  Could someone here check it out?  If that's true, I might go for t420s with display port.

    Thank you

    The x 220 has a DisplayPort as well, then why don't you use that?

    Extract from the book of Thinkpad (http://www.lenovo.com/psref/pdf/tabook.pdf):

    Intel HD Graphics 3000 in processor,
    external analog monitor support via VGA DB-15 connector and
    digital monitor support via DisplayPort (supports single-link DVI-D via cable 45J7915);
    supports dual independent display;
    Maximum external resolution: 2560x1600 (DisplayPort)@60Hz;
    2048x1536 (VGA)@75Hz; 1920x1200@60Hz (single-link DVI-D via cable 45J7915)
    

Maybe you are looking for

  • Upgrade satellite 1900-102, hard drive

    Hello... My laptop is a toshiba satellite 1900-102 with a 20 GB hard drive. I would like to ask if I can upgrade the hard drive with another model and not the classic toshiba MK * 18GAP. Is it OK to use a hard drive from another provider? I want to u

  • upgrade to VISTA (x 32) Home Premium from Windows 7 Home Premium (x 32).

    I want to upgrade to Windows 7 Home Premium (x 32). I have a HP Pavilion a6450z, which has a SLIC 2.0 BIOS made by Phoenix Technologies. I'm running VISTA (x 32) Home Premium now, that came on the computer when I bought it in May 2008. From what I re

  • Z500 touchpad work not when you use the keyboard. Please help me please!

    Hello I recently bought a lenovo z500 and it's great, but I have a little problem. When I use the keyboard to play games (I use the WASD keys) the touchpad does not, which means I can't play. Help, please!

  • How to export more than 100 points of waveform to Excel

    Hello world. Novice here. I am sure other people have my problem, but I don't know how the word it... and impossible to find a solution for it. Maybe I don't understand Labview enough to know what is happening. Here's what I do: I have a waveform, an

  • I don't see my whole desktop screen.

    I tried to change the resolution and all that.  I even restored it but I still have the same problem. It seems that the office is bigger than my current screen, I can't see the bottom where are the taskbar.