HP Compaq CQ100PC: HP Desktop since Win 10 installed

Similar Questions

• Update of Compaq Presario CQ5110Y desktop PC

  I want to upgrade my Compaq Presario CQ5110Y desktop PC then I'll be able to watch TV Online (Football, shows, ect) with crisp clear picture and no gel (if possible, HD quality) I can do this? If so any suggestions on a decent type of video card and power supply upgrades that usually cost an arm and a leg. My video card is now integrated and the provision of my Poweer is 300W. Any help would greatly be appritiated!

  Hello:

  The Sapphire Radeon HD 6450 should work (even if the recommended power supply is 400W) fine.

  The card will draw only a maximum of less than 30 Watts.

  Sound cards... I don't know anything about them, unfortunately, since I have never installed one of my business offices.

• Upgrade a Compaq Presario SR5710F desktop computer

  Hello, I'm recovering because as far as I can get out my Compaq Presario SR5710F desktop... right now there windows vista service pack 2 32-bit. The processor is an AMD Athlon 64 dual core 4450e to 2.3 GHz with 3 GB of ram at 800 MHz. First of all, since the processor is 64-bit, I was wondering if a windows 7 64 upgrade is recommended... Secondly, I know that even though I have a 64-bit processor, the maximum capacity of ram I have is 4 GB due to the motherboard, but with this card mother, is possible to increase the speed of greater than 800 MHz ram (for the motherboard specifications are hard to find). I was also thinking to replace the graphics card, but what I am seeing that will probably require a different diet and I am on a limited budget. Any suggestion? Please take into consideration the fact that this upgrade is not for games etc, its a home computer that I'm trying to be as updated as possible for a minimal cost. I am realistic, however, and I know it's an old PC. More I am not worried about existing programs (32-bit), I certainly intend on a new installation

  RickCraw,

  Here are the specifications of your Compaq Presario SR5710F desktop computer and its card mother MCP61PM-HM (Iris8). According to the specification, this model has PCIe x 16 graphics card slot and a 250 watt power supply.

  (1) most retail graphics cards require a 300 watts or more big power supply system to work properly. Install a new graphics card to detail will require the replacement of power supply as well.

  (2) Yes, you can install Windows 7 64 bit on this computer. I recommend the upgrade of RAM at a minimum of 4 GB for use with a Windows 64-bit operating system.

  (3) NO, you cannot change the speed of the RAM. Your system is limited to the following specifications/configurations of memory;

  Dual channel memory architecture

  Two connectors DIMM DDR2 240-pin

  Supported DIMM types:

  PC2-4200 (533 MHz)

  PC2-5300 (667 MHz)

  PC2-6400 (800 MHz)

  Memory non - ECC, unbuffered

  Supports DIMM DDR2 2 GB modules

  Supports up to 4 GB (2 x 2 GB = 4 GB)

  Please send Bravo

• Satellite A300 PSAGCE: rate of window and perfomance has fallen since Win 7 64 bit site amenities

  Hello!

  I have a satellite A300 Model - PSAGCE and since I have instaled win7 64, my win rate dropped to 4.0!

  I used to have win vista 32 with a rate of 5.5, since I went on the site of toshiba and downloaded the latest drivers to the machine and since that I instaled the ATI driver, the rate declined to 3.9!

  How can I upgrade my laptop performance?
  Or what should I do?

  My rates are:

  Processor: 6.0
  RAM: 6.0
  Aero graphics: 3.9
  Games graphics: 5.5
  Hard disk 5.3

  Sorry my bad English...

  You have a serious problem with your laptop?

• I have a compaq presario sr19090uk desktop pc, and the motherboard was dead. :(

  I have a compaq presario sr19090uk desktop pc running windows 7 64-bit with a card mother micro-ATX (ASUS - A8M2N - LA / Nodus M-GL8E) Socket AM2, Anthlon 64 3500 + socket 939and the motherboard was dead. What is a good replacement that takes in charge a cd/dvd ide burner and sata hard drive for undeer £100. I have also 4 GB DDR2 SDRAM installed.

  Thank you

  Tony

  Here are the specifications of your Compaq Presario SR1909UK desktop and it is card mother A8M2N-(NodusM). There is a conflict in the two specifications for what CPU socket is actually used. The computer specifications claim a socket 939 CPU, while the motherboard plug State she has a socket AM2. You will need to examine your system to confirm what type of CPU and socket he did.

  It can be difficult to locate a market after motherboard that will meet your needs as AM2 socket 939 about 5 years to 8 years and are several obsolete generation. Check e - Bay or similar in your area for a replacement card which meets you the specifications. Please keep in mind is likely to replace the HP OEM Board on your computer Windows become a "non-genuine" and require the purchase of a new operating system. Note that the recovery discs you created will not be also usable on your computer.

• Compaq Presario SR1517CL Desktop processor upgrade

  I have a Compaq presario SR1517CL desktop with Asus K8S - motherboard and a Sempron 3000 + 1.8 GHz cpu. Can I switch to a faster processor. If so, that we recommend. I was watching an AMD Sempron 145 2.8 GHz.

  For the salmon in your desktop PC motherboard, go with an Athlon 64. There is a world of difference between Athlon 64 and Sempron processors.  Semprons are in lack of power as consideration for Intel, which is known as a Celeron of treatment.

  

• Can connect wireless Compaq Presario SR5214X desktop PC?

  Hello

  I have a Compaq Presario SR5214X desktop PC. Can I connect wirelessly to the network with it? Have you looked online and I refuse to pay support to meet a simple Y / question N can I connect wirelessly to my router?

  Concerning

  Hello

  Your PC does not come with a wireless adapter, but you can certainly install one in a free PCI slot: these are the white horizontal slots shown in the bottom left of your motherboard is an example of the type of card, you need to install on the link below.

  Wireless PCI card

  Kind regards

  DP - K

• Upgrade memory of PC Compaq Presario SR2177CL Desktop problem

  I have a Compaq Presario SR2177CL desktop PC.  I checked the specifications of the product on the HP site and this is what it says for the record:

  Memory

   

  Attributes Installed memory 1 GB Maximum allowed 4 GB * (4 x 1 GB)
  * Actual available memory may be less

  Speed supported PC2-4200 MB/sec Type 240 pin DDR2 SDRAM

  I went to newegg and purchased:

  CORSAIR ValueSelect 2 GB (2 x 1 GB) 240-pin DDR2 SDRAM DDR2 533 (PC2 4200) Dual Channel Kit Desktop Me...

  When I put the pair of DIMMs in the pc, it won't post more.  The screen is still asleep and I never see the bios screen, I can't go in the bios configuration, or whatever it is.  As soon as I remove the pair, it works again.  The PC came with 2 512 MB DIMM in the slot 1 and 2, so I tried to delete those and replacing them with the pair I bought and got the same results.  I buy the bad memory?  I see it should work.

  Thanks in advance for any help and ideas.

  Chuck

  Finally!  I decided to try the suggested crucial.com memory, I went to the city and found in the store of the local computer.  It is plugged in and it works like a charm.  NewEgg gave me a credit on the memory of others when I called them, so everything worked.

• Compaq Presario SR1214NX desktop PC: update BIOS for SATA HDD?

  Hi CV Experts.

  In 2004, I bought a HP Compaq Presario SR1214NX desktop PC. Now, leave the original hard drive and I bought a new Seagate 500 GB SATA hard drive. I thought that this would work because the PC MoBo has two SATA connectors. After installation, I noticed the drive is not detected. I checked the BIOS but not hard listed. The installed BIOS is "BIOS Award BIOS Core Version 6.0 revision 3.10 26/07/2004.» What can I do? Is there a BIOS update available?

  Help, please!

  

  Do more research on this issue, I think that this motherboard may not have native support SATA. You can use ports SATA via Windows after you have installed the necessary drivers. I suggest that you add a primary as hard drive IDE PATA drive and load Windows. Post windows installation, install the necessary SATA drivers and plug the secondary drive SATA for use as a hard disk.

  I'm sorry for all of the early confused communications.

• Compaq Presario SR5214x: Replacing the CMOS battery for Compaq Presario SR5214x desktop computer

  How to replace the CMOS battery on a Compaq Presario SR5214x desktop computer. What type of battery? Where is the battery? Thank you (deleted content)

  @ernier

  You will find how to do here.

  http://h10032.www1.HP.com/CTG/manual/c00840496

  REO

• No sound through your desktop since the upgrade to OSX10.11.2

  No sound through your desktop since the upgrade to OSX10.11.2

  There are several possible reasons for the release of its failure. Please take each of the following steps that you have not already tried it. Some may not apply to your model. Stop when the problem is resolved.

  Back up all data before making any changes.

  1. start by the steps recommended in this support article. Do not skip any step. It is the starting point for further efforts fix.

  2 make sure that you have an installation fully updated to Mac OS X.

  3. If you have installed an application called 'Own memory' or any other third party software that is supposed to 'clean' or 'purge' memory automatically, remove it according to the instructions of the developer and restart. You should do this even if the software is not causing the problem, because it is useless.

  4. other third party which has been reported to interfere with an audio software includes the "Boom" and "Samsung Kies". If necessary, uninstall instructions of the developer (not not by dragging something in the trash.)

  5. If a device AirPlay is selected for the audio release of iTunes (or other applications via third party software such as "Wing"), deselect it.

  6. launch the application 'Setting up Audio and MIDI' by entering the first letters of his name in a Spotlight search and by selecting it in the results (it should be at the top). Select output integrated in the list on the left. If the mute boxes are checked, then.

  7. If a red light is visible in the port of audio when its must play, the internal switch is stuck in the position of the digital display. You may be able to release it by inserting and removing of a mini stereo plug of adequate size. If this is not the case, the machine needs to be repaired. Insert any kind of tool in the port can cause damage that is not covered by the warranty.

  If there is no red light, the switch can always be locked in the position of the helmet. Try to clear the same way.

  8 disconnect all devices wired except the keyboard and mouse, as appropriate. If more than one display is connected, unplug all the extra zeros. Restart and test.

  9. If you have a MacBook Air, turn Bluetooth off and restart.

  10 start in safe mode. Do not open a session; Just restart as usual when the login screen appears. When you do, make sure that the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and the sound does not work.

  11. reset the NVRAM.

  12. Reset the SMC.

  13. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/Audio

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash. Re-create your settings in the sound preferences panel.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  14. reinstall OS X after you back up all data.

  15. an appointment of 'Genius' in an Apple store.

• AMD Athlon II X 95W 3 450 processor compatible with the Compaq Presario CQ5700Y desktop PC?

  I was wondering of the AMD Athlon II X 95W 3 450 processor (ADX450WFGMBOX) compatible with the Compaq Presario CQ5700Y desktop PC? Thank you very much!

  Dr., welcome to the forum.

  Here is the processor upgrades that are compatible with the motherboard:

  • Max TDP: 95W

• Compaq Presario SR1928IL desktop PC

  I have Compaq Presario SR1928IL desktop PC

  Any v1.0, v1.1 or v2.0 PCIe x 16 graphics card, with the exception of the cards of ATI Radeon HD 54xx, should work on your computer. Keep in mind that the power of your computer's power supply will limit your choice of cards. Depending on the card you get, you may need to replace the power supply.

  Please send Bravo

• Is connected to the Internet, but cannot use the Compaq Presario SR5123WM desktop PC

  Product name & #: Compaq Presario SR5123WM desktop PC (GC660AA-ABA)
  Operating system: Windows Vista Home Premium 32
  No only error message when Internet Explorer does not display the page or iTunes can't find any connection network (any application that requires an Internet connection).

  No changes were made to the system.

  I have the dial-up connection. The Bureau uses the Modem - PCI Soft Data Fax Modem with SmartCP (COM3).

  Once I start the computer, log in to my user and connect to the Internet, I click on Internet Explorer and type in Google to see if it would work. It is said that "Internet Explorer cannot display the webpage". For iTunes, he would say "iTunes has not to connect to the iTunes Store." Make sure your network connection is active and try again. »

  I tried all solutions online and by phone. I reset netsh int ip / winsock. I reset Internet Explorer options. Nothing works.

  What is strange, is that the Internet connection works well on my laptop (using Conexant D110 MDC V.92 Modem (COM3)).

  It would be GREAT if you could help me find a solution to this problem, because this has happened for months, and I'm tired of waiting. I put all my hopes on you.

  You may be able to do a system restore if the original HP partition is always on the computer.

  Here is a document detailing the steps:

  Perform a recovery of the system (Windows Vista) HP

• No sound in Compaq dc5100 with XP Pro after system install

  Hello

  I got hold of a Compaq DC5100 SFF desktop computer and install a new copy of XP Pro using the key provided.  I was able to get all the drivers except for the multimedia audio controller.  I searched and searched for hours without success.  Any suggestion on how to get the sound to work?  I don't have the original installation disc.  Loading XP Pro with service pack 3

  Thanks for any help

  Kevin

  Go to Device Manager and right mouse click on the audio device and see if it indicates an error code.  What level of bios is your PC?

  Lookherefor your audio driver. It lists the ADI driver.