HP Compaq d530 SFF DIMMs do not recognize. Windows Vista Home Premium 32 bit - BIOS version 02.44
Hello HP community!
I recently got a HP Compaq d530 SFF of the company, where I had my work experience.
Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.
I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.
I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).
Maybe someone has a suggestion how to fix this?
I've already updated the version of the BIOS at 02.44 (later I could find).
Thanks in advance!
Yours sincerely Simon Cahill
Not all memory is the same, even when picking PC2700. Did you buy non ECC?
Here is a guide on the configuration of the memory for the D530SSF
Tags: HP Desktops
Why can not download and install updates from Windows Vista Home Premium 32 bit?
Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:
WinVer the OS details appear. If no SP1, download & install it
Use this link for download.
This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'
I am not able to download and install Windows Vista Home Premium 32 bit windows update. This Gateway laptop has always been able to quickly and easily install the update by clicking windows update. However, since the introduction of Windows 10 it has been a lot of your time trying to install updates. I had this same problem with Windows 7 too. Never before there was no problem for the two operating systems. Installation of Windows updates has always been easy and fast without any problem. Running the troubleshooting isn't good and hunting error codes has been unproductive. What the hell is happening?
Hi Joe Cool1:
'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems. The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.
There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista. The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.
You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/. Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.
32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v18.104.22.168 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS
I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?
1. what happens when you try to install Windows Update and the fix, you get any error message or error code?
2 have you made changes on the computer before this problem?
3 is the limited issue during the installation of specific updates?
Problem when installing windows update, see the following Microsoft article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602
The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Keep us informed on the status of the issue.
I'm unable to start the BITS service on my computer.
I use Windows Vista Home preimum 32 bit OS.
I tried the following solutions that I found here.
Start scanning system. This process will take time.
Start of the phase of verification of the scanning system.
Full check of 100%.
Windows resource protection found corrupt files but was unable to repair some of th
Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
(2) delete the files qmgr0.dat and qmgr1.dat download/ProgramData/Microsoft/network directories.
I also tried using BITS Repair tool downloaded from the microsoft web site, but no luck.
When I start the BITS service, I receive the following error message.
Please suggest me how to solve the problem.
The service Background Intelligent Transfer Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
I tried to run the Norton removal tool.
Finally, I reinstalled my OS. When I tried to restore using Windows restore, some applications do not work. Therefore, I have reinstalled my OS.
Thanks for your great support.
I read some information about windows vista. Is Somethins I read several times: "while all editions of Windows Vista can support processors multi-hearts, only Windows Vista Business, Ultimate, and Enterprise can support dual processors."
So my processor AMD dual-core or a quad-core is not used or recognized by Vista home Premium 64-bit? What 32-bit?
As for Intel?
Think catch. The chip in the socket is called a physical processor.
Vista Home Basic and Premium can use a. Any number of cores is OK. Carrots
are called logical processors.
Vista Business, Enterprise and Ultimate can use two jacks. Number any of
cores of each is OK.
Only the editions of Windows Server can use 4 processors and up to.
See you soon.
Mick Murphy - Microsoft partner
I'm trying to update windows vista family premium machine SP1 so I can access our company RDWeb access, but both windows update and standalone installer fail. Tried each option support, including Mircrosoft correction tools does not. Help, please! In microsoft update, it crashes just to 'download' scene at 0%.
You can try the troubleshooting provided in the following steps to solve the problem.
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
Let us know if that helps.
I tried some of the ideas in the forums and Vista still won't let me load the drivers. It recognizes the printer and I'll install the drivers, no luck getting error 0x000003eb. At IT, share the printer UAC is on, tried with offshore, does the same thing.
Try to install Xerox Phaser 6250DP Laser Color. If anyone has an answer, you wish.
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
Have a read of the link above re Vista file and printer sharing.
Permissions/Share info is there as well.
See you soon.
Mick Murphy - Microsoft partner
This just started about 2 weeks ago and it starts as soon as I opened my browser and it does matter not what browser I use. I have also a lot of page up latch and do ctrl alt del out of there because it crashes my cursor and we can do it all. I ran Microsoft Security Essentials to search for viruses and it came back clear, I did a disk cleanup and I cleaned my computer with a program I have and none of it helped. So if someone has something they know who can help, I would be very grateful.
No security program finds all so do a thorough check of the malware.
You say you "cleaned up my computer with a program I have.
We recommend that you use that you use a registry or a program of cleaning/TuneUP/utilities, because they can do more harm to your any good operating system that they claim to be able to do.
Search for malware, if necessary using the safe mode with networking.
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
And also scan with the free version of SUPERAntiSpyware
SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.
SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.
THS is a very good program to scan your system to remove adware, etc.:
AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer. Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.
And just to be sure, nothing is lurking in the background:
'TDSSKiller Rootkit Removal Utility download for free'
See you soon.
Windows Vista home Premium 32 bit SP2: iTunes 10.1: there is a problem with this Windows Installer package. A program required for this install to complete could not be run.
I worked on it for about 3 days now. It's driving me crazy. I tried everything I could find to try to solve this problem.
When installing iTunes it stops and a box will then appear to me said "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support provider or package. "No error message or anything, that's all I get. When I hit the only button I can hit the OK button, it continues to install QuickTime. Sometimes, it will install the iTunes file and the shortcut, but the shortcut does never work and the iTunes file is always empty. I have download the installer directly from Apple.com and save to the desktop, a new copy after each test (just in case).
Here is a list of what I've tried:
- Apple Support page: difficulties to install iTunes or QuickTime for Windows
- Apple Support page: removing and reinstalling iTunes, QuickTime, and other components of software for Windows Vista or Windows 7
- Apple Support page: iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)
- 1,5 hour long session with Apple Support Tech, where we repeat the two steps albums created a new admin account and then tried to install on this account of troubleshooting. After it is has not told me while they could not fix the problem it was a questions and contact Microsoft Windows.
- Microsoft Answers page: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/thread/2aa2c368-2fa2-4fc8-bb2a-5d74ce34a856 (could not complete the download of the file has been removed)
- Microsoft Answers page: http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/c45cfbd2-23f2-4097-8259-44e8f9e85c93
Yes, I am the administrator of the computer with admin abilities, yes I checked run this program as an administrator. I also made sure to stop all this as possible could interfere with the instillation, including my anti virus and what not even before I tried a clean boot.
Is there anything else I can try?
~ Thank you
I don't know whether or not the original poster solved their problem.
See if it works for you.
Error 1719 Windows Installer Service inaccessible during the installation of the applications.
I tried to install my scanner software that works with my XP operating system and does not work with Vista. Using the Epson Smart Panel software, I was able to scan slides and negatives as well as regular photos. Is there some way I can load Epson Smart Panel and Epson Scan with Easy Photo Fix to my software disc software scanner Epson XP and then get Vista patches to make it work?
This is the site I used
You can download it for free to try and then buy if it works. He was also well answer the questions I sent an e-mail to him.
I hope this is a help!
Error 1053 and error 1068, I have no sound, No Security, Windows Update does not work, Windows Media Player doesn't work, restore the system no. said Volume Shadow Copy 0 x 81000202, please someone help me, Windows Vista Home Premium 32-bit
My system does not work properly. Something has closed most of my Windows programs. How it happened and why I don't know. I can not do that more with Microsoft. First it was XP, Vista now. It's like as soon as Windows 7 is out Microsoft has launched programs to destroy Windows Vista. I have to deal with that now. Please if anyone sees this and can help, please help me!
1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.
2. click on continue or provide credentials admin if prompted.
3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete.
Hope this helps you. Let us know anyway. Make it a great day!
"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
I bought this product in 2005. I'm just out of the box yesterday. The printer works fine. The software CD was made before Windows Vista Home Basic Edition. He acknowledges only 98, Me, 2000 and XP. He calls a Unknown600 to Vista. Is there a driver or other update I can use? Thank you.
Welcome to the HP Forums!
I noticed that you are looking for a basic Windows Vista Home Edition driver for your HP PSC 2355. I'm happy to help you!
You can download the driver directly using this link, HP full feature software and drivers.
Hope this is what you are looking for and have a great day!
"Please click the Thumbs up icon below to thank me for having responded."
My computer did not an automatic update in over 6 months. I discovered this when I could not install my tax preparation software. the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»
Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
sfc/scannowFor the results of the SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "
The system update tool
Ensures the consistency of the folder WinSxS (Side by Side).
For 32-bit Windows
For 64-bit Windows
To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Reregister Windows install
Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.
Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type
That you re-register Windows Installer.
A few days ago I pressed the space bar to wake up my (HP pavilion m8100n) office, and I met several things at once:1. the icon of the internet was just two monitors blinks back2. a box pops up saying "an audio input jack has been disconnected" (when NO such thing has happened!) and now I have no sound and just an "x"symbol next to the symbol of volume." I tried connect headphones, still no sound at all.3. my wireless mouse works most completely (again, I don't have anything) I had to use my Intuos3 Tablet mouse click autour.Then I restarted the computer, unplugged and replugged the usb for wireless mouse thing, solved #3.
#2 is still pending.#1 takes a strange turn.The computer more remained in mode 'sleep', even if I told him to go to mode 'sleep', and every time he woke up upward, I had no internet (just two monitors flashing back and forth.)I went to the Device Manager and unchecked the box that allows the computer to disable internet to save energy, at least now when it comes out of sleep, he maintains the internet.The computer also doesn't stop- every now and again, he normally stops when I said to, but more often now I have to force it to close hold the button down.The question of the internet has gotten worse. While we had a few problems because of the company's Internet, we called and it is resolved.I know the router is not the problem because that all computer laptop in the House can connect to him easily.My computer always had problems with wireless cards, is also connected to the router via e-thernet.The only way I can work around the issue now is to stop (be it by asking the computer to stop or forcing), from, he and hope I get internet.If I don't have internet and instead just get the flashing monitors symbol, I tried to tell the computer to restart, but this does not resolve the issue.When it restarts, there not even internet.I still close, wait and start again, and * hope * I have internet.When I have no internet, and I'm trying to diagnose and repair, it always ends up by saying "Windows cannot solve this problem."When I click on network and sharing Center, he says that I'm connected to a 'network unidentified' - which is meaningless, because when the internet works, it says that I'm connected to the private network of our House.I tried Googling autour, but I really can't find someone else who has the problem as well as the problem of the e-thernet restart/stop.Any help with this would be massively appreciated, I do commissions online my source of income and I need this computer to work, because it's my graphic computer.(I've included all this other info in case it helped to identify the problem.)
All my ports usb does not as well, I found this http://www.online-tech-tips.com/computer-tips/usb-device-not-recognized/ and it seems to have fixed everything! Even the problem of noise!Sorry to have wasted your time, thank you for the quick response, however.
Maybe you are looking for
I have uninstalled and reinstalled my printer as it kept losing its network connection. It appears under devices and printers, but there is no option to make my default printer. It is not visible in applications such as Word or IE. In Device Manag
I was able to print wireless until I had to change the name of the network. Now I can't print because the printer retains the old name of network. How can I change this? I tried everything I can think of, including wireless without router and myself
I have a new hard drive with no OS and my laptop is not a CD player. I intend to buy the operating system, but I need to know how I can install it once I get it, given my laptop has no CD drive. The operating system can be purchased at the USB format
Hello.I want to be saved in the path of the current running jsx file.Is there a way?Thank you.
I was wondering if there is anyway to Exchange my items from adobe first 14 for the first Pro 14 CC before installing