HP compaq dc7600 new CPU arrives with firmware error

Similar Questions

• new cpu insalled / with questions

  Hello

  So I just upgraded my cpu with one I bought off e - bay, but when he started he was starting the resolution is messed up. Giant letters and in "Device Manager" > processors, he always saves my old processor. My Windows partition does not recognize my new CPU, I tried clicking on "Update my score" but I droped my previous 5.9 1.0. I decided to download an old version of my BIOS, but it did not turn. Don't have I skip a step or something?

  Hello

  Before the power would have been my choice to clear the CMOS memory.

• Why not my new Flex2 arrived with a user already inside?

  I ordered my laptop direct from Lenovo. When he came yesterday, I turned it on and rather than be asked to put up with my information, it was already loaded with the e-mail address of another person (IE, someone else had already set up). I called twice now--once to talk to technical support, who had me do a factory restore, and once to talk to the sales people. They all have both said will display it the number of new series, and they offered me $69 for my troubles. I am still weirded out, especially in the light of this adware issue it is Lenovo infestation.

  Should I ask for a replacement, or is it a factory restore enough?

  A factory restore is sufficient.

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I correct "processor not valid update firmware" I have a compaq dc7600 cmt C2C6260Q93

  My m/c is a HP Compaq dc7600 CMT (C2C6260Q93).

  I replaced the processor 2.8 with intel (R) pentium (R) D CPU 3.00 GHZ / 4 M, during startup, it gives the message "missing or not valid processor microcode update.

  My motherboard is HP (C) 2005HPDC can you help me solve this problem?

  Thank you...

   

  You are the very welcome.

  Please read this guide to make a USB flash drive bootable.

  http://files.extremeoverclocking.com/file.php?f=197

  You must download and install the HP USB format by the link tool there is on the Web page.

  Use the tool to format and do a usb flash drive bootable.

   

  Then, you will need to download Windows 98 DOS files from the link there is on the Web page.

  Then, you copy and paste the files BACK of Windows 98 in the bootable flash drive.

  
  Then you download and run the update of the firmware from this link.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=472278&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DPSG_I23753_109013%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You will now see an instruction page after you run the update of the firmware.

  Under the section titled USB Flash Media Micro Code flashing in the BACK, select BACK Flash happy folder view.

  Copy all the files on your USB drive bootable.

  So, to summarize...

  1. you have a bootable USB key with the HP format tool

  2. you copied files BACK of Windows 98 in the bootable flash drive

  3. you have copied the contents of the flash HP firmware BACK on the bootable flash drive folder.

  You are now ready to update the firmware.

  Insert the flash drive into a USB port.  Turn on the PC and at the beginning of the HP welcome screen, press the F9 key to get the start time menu.

  Select the boot from USB drive option and press the Enter key and the PC should boot from the flash drive on.

  Now you need to know a few basic DOS commands.

  You should be at the command prompt.

  At the command prompt, type the FLASHBIN.exe command and press the Enter key.

  Then follow the instructions on the screen to update the firmware.

• New IPad airprint can't find the Officejet Pro 8500 A909g series with firmware DLM1FN1006BR

  The series Officejet Pro 8500 A909g with firmware DLM1FN1006BR is satisfactory airprint on the new IPad?  If not, is there any difficulty?

  No, your printer is not capable of AirPrint and can not be.  You can try other printing applications, like HP ePrint home & Biz.

• I'm working on a HP Compaq dc7600 compact computer with a BIOS password

  I'm working on a consumer HP CS 1900 post that contains computers HP Compaq dc7600 small form. On a computer, the battery holding the BIOS is released and the date and time must be reset in the BIOS. The configuration of the BIOS is password protected and I don't have any idea what is the password. I tried to go beyond it with a password BIOS HP chip resetter, but when I'm in the configuration it still doesn't let me change the date and time. Should I just reflash the BIOS? I bet that even after it is flashed there is going to be password protected. I left the battery for a few days and changed the rider of neighboing etc., but it is still protected. Is their a manual/doc/pdf that could respond to explain/identify the BIOS password?

  Hello:

  I don't know if it's me or the HP support site, but I can't seem to him.

  That's what you need to do to clear the BIOS password on a dc7600...

  1. turn off and unplug the PC. Unplug everything plugged to the computer. Keyboard, mouse, monitor, printer,... everything.

  2. press the power button to drain any residual power from the PC.

  3 open the case and locate the Green password on the motherboard jumper.  On the WTO, it is very close to the primary SATA HARD drive data connector.

  There is also a green light about, but of course that will be turned off for you.

  4. in any case, locate this jumper and remove it and place it somewhere for more security. Some people just put on one of the 2 pins. I prefer to remove it.

  5. now connect the cables. etc and start the PC. The password must now be provisioned.

  6. switch off the PC and replace the Green jumper on the two pins and everything back together.

  Fixed.

  Paul

• Compaq dc7600 CMT acknowledges no more than 3 MB of memory

  I have a Compaq dc7600 CMT.  If I load more than 3 MB of memory in the 4 slots, it only recongnizes 3328.  The bios sees 4 but when memory test jumps after 3328.  In windows, it said 3.24 MB.  Any suggestions?

  Hello:

  This is quite normal and can only be changed if you have installed a system of exploitation 32 or 64-bit.

  System memory gets reserved mainly for sharing memory video and other uses.

  Only desktop with the will of chipset 965 or newer Windows based on the Intel 'see and use' all 4 GB of memory with a 64-bit operating system installed.

  The dc7600 has a 945 chipset.

  And you want to leave the modules 4 x 1 GB in there for the memory works in DDR mode for better performance.

  Or install 1 GB - 512 MB - 1 GB - 512 MB if you do not see the 3/4 GB of memory disappear.

• Support USB 2.0 missing HP Compaq dc7600 Convertible Minitowers

  Hello.
  I used HP compaq dc7600 PC with Intel Pentium 630, everything was fine, usb 2.0 worked fine, then I upgraded cpu with Intel D945 + updated my bios (1.61 Rev. (A) and then all of a sudden the usb 2.0 support went. I mean im running my usb devices on usb 1.0 or 1.1 and transfer speed is very slow. How can I get back usb 2.0? Ive tried to update the chipset drivers. Uninstall/install usb controller stuff, nothing seems to help. When I plug into usb device always said that "this USB can preform faster if you connect it to a Hi-Speed USB 2.0 port. Is it possible to fix this?

  Add.
  I tried all usb ports

  I am very disappointed with HP on this thing (not the first time...), updated bios of course on this motherbords (some of them) 1.61 or 2.04 slows down USB - solution: form download here

• Compaq presario cq43: compaq presario cq43 cpu update

  I have a compaq presario cq43 notebook pc with APU AMD E-300 with radeon hd graphics 1.30 GHz and 8 GB of ram.

  is it possible to upgrade my cpu to a more powerful?

  Hello

  No, it is soldered to the motherboard and buy new CPU with motherboard would be a very expensive updrade and it may NOT work at all.

  Kind regards.

• Graphics card for Compaq dc7600 cmt

  Hi people

  just joined this site (sorry if this question a thousand times), I just bought a Compaq dc7600 and there a supply 365 w, I want to put a new graphics card to play some games (especially old) can someone tell me a decent graphics card that will work with this power supply.

  Thank you

  Sarra

  Hello

  You might want to look over the following video cards from your PC only diet 365 w:

  $80--->NVIDIA GT 440 25.6 GB/s - single slot width

  $130-->NVIDIA GT 545 43 Gbit/s - single slot width - might be difficult to find but perhaps only in the store

  An older but great video card is NVIDIA GT 240 1 GB DDR5 - 54.4 Gbit/s and a width of single card. This card does not support DirectX 10, which is eventually used in some of the latest PC games but it's a great performer.

• broken? : new message arrived sound-selection

  In tools-> Options-> general
  "When new message arrives"
  'Play sound '.
  by clicking on 'Browse' does nothing.
  and can not enter the path manually either.

  PortableApps.com lists it support own page for their applications.
  They may have modified Thunderbird, and you should check with them.
  http://PortableApps.com/support

  TB - 38, 3 Win10-PC

• How to install Xp in Compaq Cq 40-145 preloaded with Vista Home Basic laptop.

  Hi I want to uninstall my computer vista laptop is Compaq presario Cq40 - 145

  When I boot with the xp cd I have encounter a problem screen blue with hard drive error message is not configure... my...

  Can anyone suggest me how to do... and I want that all drivers for xp... Please suggest me as soon as posible...

  is my laptop p/n number: FZ737PA

  Message edited by rahul2009 on 11/05/2009 22:59
  Message edited by rahul2009 on 12/05/2009 01:26

  Hello

  First make the Vista backup. Here is all the information, how do.

  Now you need to integrate your drivers Sata win nLite.

  Here is the guide how to do it and here are the drivers Sata for you. Just unRAR it drivers with winrar.

  Remember, also, that you use the Windows XP SP2 version. If you have not got the version SP2 here you can download this service pack

  and here you have a guide to how to integrate this file with your new system of nLite.

  In this program, you can even burn your new XP cd with this driver.

  Drivers for your model:

  Chipset here (first install it and reboot)

  Intel Matrix Storage Manager here

  Intel 4500MHD graphics here

  Intel 5100 wireless here

  or

  Broadcom Wireless here

  Bluetooth wireless here

  .NET framework (required before IQ) here

  HP Quick Launch buttons here

  MS-UAA  (before its IDT, model and drivers ATI HDMI), here

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  High-Definition Audio (HDA) modem here

  ALPS Touchpad here

   

  NIC Realtek 8111 here

  JMB38X Card Reader host controller driver here

  If you have had for 7 unknown devices (buttons drivers) here

  Installation--> right click machine.inf, choose install.

• Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hi titi % 20wright,.

  Please use the link below to Download Adobe Creative Suite 6 applications

  Since you get two activation with a license, once installed you must activate the product using the same serial number. See, https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if that helps.

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.