HP Compaq nc6400 Laptop - recovery CD

Similar Questions

• HP/Compaq nc6400 laptop: HP/compaq nc6400 Windows 10 and graphic problem, erasing text in areas of immersive shell.

  I have a laptop nc 6400 product number: RB518UT #ABA uses an ATI mobility Radeon x 1300 graphics card, as well as Intel (r) mobile express chipset available 965 G. I chose to use Classic desktop windows at the moment and no problem at all now. I don't know about Vsync or 2D with any partbut I disabled it Aero, windows 'themes' clear the text, mosaic with not a spec left shaows WHEREAS I could think of and still the text clears using my own slider like gum or disappears and leavesablank. Alsooccasionaly gibberish are more black lines not only any official language, but today I thought that almost a nonsense post script type to some... in some mobile tiles that can refresh, but even that does not work as it always has... I am at a loss I need a decent graphics that I use photoshop and dreamweaver allt/times a day and at least they need to exploit as much as possible. I had no problem with their execution on this computer for the past 4 years or more. It has been now 4 OS on this big machine that has not had any problems over the past 7 years. He 4gig memory and 750 GB hard drive and lack of wellis touchscreen but... not worry Windows when they checked all this to check.  I am beyond my capabilities and need help. Even if I need to build my own divers I Although it will not be the fastest answer, but I can see the need to know how the alter pilots an asset right about now.  Please you all the

  suggestions will be an asset, as I am a "what to do now the level of frustration"and would like that much more about the reason for it. " I was just as lucky as my machine has never had issues that were close to that sort of thing.

  TY for any help, answers, all possible assistance, you may think.  I hope that I have provided a clear problem, and most of the information you need. I never used a service like other instances, that raising any issues that others have as well.  Always helping if I wasn't sure but never as difficult a question as is happening now.

  Ty for any possible assistance or suggestions that can point me in the right direction.

  egcorrell

  Hello:

  The only suggestion I can offer would be manually install the graphics driver Vista support for your laptop and driver, page and see if it works...

  BTW, the nc6400 has the mobile Intel 945 chipset, not the 965.  The 6910p has the 965 chipset.

  Download and run this driver... You will probably get an error of unsupported operating system.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1847705&swItemId=ob_59975_1&swEnvOid=2103#tab1

  Conclusion of any windows error.

  Go to Device Manager and click on the video controller (or Microsoft based Display Adapter) who need drivers.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp38833.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If your nc6400 has this problem with the SMSC Infrared driver with the! Marc, I went into the BIOS, found the menu of Ports and disabled the infrared port, saved and restarted.

  That got rid of the problem of device.

  I don't know of anyone who uses the infrared port anyway.

• I can't reinstall windows Vista Home Basic Edition to my Compaq presario laptop

  Hello
  I want to format my 'C' drive and reinstall windows Vista Home Basic Edition for my 'compaq presario laptop.
  When I lived with my recovery disk, it has been fine until "loading windows files" and taking me to the recovery / restore point but not with the format options (GUI).

  Hello

  With this HP Compaq recovery process, it's a different process than the installation with the Microsoft DVD

  There is a section slightly more than 1/2 at the bottom of this link from HP showing you how to reinstall Vista using their recovery disks.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#RestoreWithDiscs

  If you have any questions or problems with it, contact HP as it's the HP recovery process.

  Contact HP:

  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1336217096189.876444892.199480143

  Or try the HP's Support Forums:

  http://h30434.www3.HP.com/

  See you soon.

• HP Compaq 610 laptop computer lcd cable

  Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

  K_Szabi wrote:
  

  Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

  Hello

  You can buy a complete kit under this part number: 538463-001

  http://www.lambda-Tek.com/538463-001-HP-SPS-LCD-cable-kit~CS/B569917&viewSpec=y

  Useful information be found here as a way to replace it etc...

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=3958407&targetPage=http%3A%2F%2Fbizsupport2.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc01787889%2Fc01787889.pdf

• Can I install windows 8 in hp compaq nc6400

  can I install windows8 in hp compaq nc6400
  RAM - 1 GB
  disk hard - 80 GB
  processor-Intel Core 2 Duo T5600

  Hello

  Microsoft has a tool that is similar to Windows 7 Windows 8 called Windows 8 Upgrade Assistant Adviser. Please download the wizard and run it on your computer:

  http://Windows.Microsoft.com/en-AU/Windows-8/upgrade-to-Windows-8

  Please check the report and decide. To be honest, I would not upgrade the machine, it will cost more to buy a new machine (sheet even better) with Windows 8 (or 8.1) installed and that you will give peace of mind.

  Kind regards.

• Computer Compaq cq56 laptop types numbers instead of letters

  Compaq CQ56 laptop

  product # XG809UA #ABA

  Windows 7 64 - bit os

  Enter numbers instead of letters. I have to uninstall keyboad in Device Manager and restart the laptop to make it work again. The keys on the keyboard to solve the problem? Keyboard does not Num Lock key.

  Hello

  It is possible that this could be a hardware problem, try the following.

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Go to Device Manager and uninstall the keyboard like you did before.

  Then shut down the computer, disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• Where can I download free drivers for a Compaq Presario laptop

  Original title: Download drivers

  Do you know where to download free drivers for computer compaq presario laptop?

  Hello

  Check with Compaq Support, their drivers and documentation online and ask in their forums.
  Other good sources are the real manufacturers such as Intel, ATI, Nvidia, RealTek or that which
  is the manufacturer of the device OEM.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/|

  ==========================================

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - graphics card - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on set to update driver
  (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
  their own software and drivers and all other main drivers that you have.

  Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
  site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
  software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
  installation.

  Always check in the Device Manager - tab drivers version you install actually shows up.
  This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
  install a driver - reboot - check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I use compaq c702tu laptop .winxp Setup displays "unknw &lt; no found disk &gt; disk during the partion.

  I use a computer compaq c702tu laptop. with celeron processor, 512 MB of ram

  recently I changed my cd / dvd rw. After that, I tried to install winxpby by selecting the dvd as option frist drive in the boot order

  "while the establishment performs and partation it did not show disk hard instead of he displayed" unknow disc found

  After that it is if we press any key restart process system and even continues. Please help me.

  --

  Kind regards

  The c700 series uses SATA hard drives and Windows XP will not see a SATA hard drive without help. You have to load the driver for a SATA hard drive with the installation disk XP in "slipstreaming" of the pilot in the disc or using a usb floppy drive. Windows Vista and 7 and 8 will work fine with SATA drives out of the box. Post back for more information or see here:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  Yours is one of the models of "moderate." Simply follow the instructions on the link, or by post if you need help. You can also go into the BIOS and disable native SATA so that the system detects the disc as an ordinary IDE drive. You may be losing 5-10% of the performance of the car like that, but it's possible although difficult to set it to the native SATA after installation of XP.

• Ports on Compaq CQ61 laptop.

  Recently I plugged in a device with the normal USB plug into a socket (port) on my machine. Routine enough, but this time a message came in saying that "the dongle will run faster if it is connected to a hi-speed port." Check the info seems to tell me about the (apparently 6) ports on my machine. To my knowledge there are only three. What I'm missing here?

  Any advice would be appreciated.

  I use a Compaq CQ61 laptop, model 416SA, Windows 7.

  Aitchbone

  Hey aitch372,

  It seems to me that your port USB it says it's something different than a 2.0 port, which it is.

  This document should give you a better look at why this is happening.

  http://goo.GL/WnkPY

  Try this fix run firstly, it and all the questions you have in the USB ports this fix should correct the problem.

  http://goo.GL/NgZoS

  Also, can you let me know where and when do you think that this message on your laptop?

• How can I reformat my HP Compaq nc6400 and nc2400 computers laptops, I have all the disks?

  I need to reformat my laptop HP 2.  I never did.  I have the CD of the operating system (Windows XP Pro) and the & Application Driver Recovery DVD from HP for two laptops.  Help, please!

  Hello

  In this case, the machine boot CD and select fresh installion will be the best option. To be able to boot from the CD, you must change the BIOS startup sequence. Please:

  • Restart the machine to access the BIOS by pressing F10 (repeatly shortly) during the initialization of the process (before Windows logo turns upward).
  • Once you're there, select the Advanced tab.
  • Then select CD/DVD
  • Press F10 to save and exit.

  After that, put the CD of XP installtion for machine and restart.

  Kind regards.

• Compaq Presario 2199US recovery help

  I have a Compaq Presario 2199US notebook that has been given to me.  The laptop came with factory restore disks.  There is a COA sticker on the bottom of the machine.  I have a Windows XP home SP3 and tired to do a clean install to use it.  When I try to use the COST he told me that I have an invalid number.

  Could it not because the certificate of authenticity is to maybe windows family xp without service pack?

  Any suggestion on how to be me and goes again.

  Hello:

  The only suggestion I have is that you can order a set of recovery disc for your laptop.

  HP has more, but you can still order a set from here.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=4219

  If you do not install a XP OEM installation disc, that is why the product key does not work.

  In other words, if you si vous utilisez use a retail full or upgrade XP Home Edition installation CD, the OEM product key will not work.

• Compaq nx6110 no recovery disk

  I have a Compaq NX6110, running Windows XP Pro

  It runs very slowly and I would like to restore the laptop to factory settings.

  I don't have the original recovery disks.

  The laptop doesn't have a recovery partition.

  There is no Recovery Manager software on the laptop to create a set of recovery disks.

  Is it possible to download Recovery Manager, so that I can create a set of recovery disks.

  You are the very welcome.

  Unfortunately there is no download for XP anywhere.

  You can try to call HP to the United Kingdom at this number and see what they say about the availability of recovery disks.

  0845 161 0030

  Mon - Fri / 08:00 - 18:00
  (except holidays)

  Calls cost 4 p / minute from a BT landline
  Costs of other carriers may vary
  Mobile calls can be higher

• want to dv6 Intel core i7 nvi630m: operating system for laptop recovery

  How industrial get built in programs from my laptop when I lost the recovery DVD?

  Do you still have the original hard drive? Installers for most, if not all the applications of the plant are in the folder swsetup at the root of the C:\ drive. Always too, you might be able to buy HP recovery discs.

• System for HP laptop recovery

  Hello

  I have a laptop HP (HPG62 Notebook PC), with Windows 7, purchased in 2010. Recently, I received a message saying «you are not running Windows genuine, Reolve Online» When I tried windows update, the answer was Windows Update Check failed.

  On the "Computer" icon, if I check the properties, I do not see the system information. Says "failed to load the page.

  So I performed a system recovery. I got a response after a while "system restore failed.

  I tried to turn on the computer, I got "BOOTMGR" does not exist. Press Ctrl-Alt-Delete. When I did, repeated the same message. I pressed ESC, then he gave me of choice for some of the tests:

  I ran a few tests of system, I got following error:

  INTELLIGENT control: passed

  DST short: FAILURE

  FAILURE ID: OLU7HV-57E6AV-XD003F-60R403

  PRODUCT ID: WQ767UA #ABC.

  Hard drive failure.

  Any help is appreciated.

  ic_engr

  Everything worked well. I have re-installed the drive HARD and also CDs.

  However, I am not able to get the update of windows (win 7) or because windows Defender starts.

  Concerning

  ic_engr

• Compaq 620 laptop: Update pre-2013 model HP Compaq to win. 10

  It seems that my Compaq laptop of pre-2013 model requires the upgraded drivers be compatible with Win 10. Anyone know what drivers are correct?

  SFP

  Sorry to be the bearer of bad news, but the problem you face is that Microsoft provides only pilots with the most basic features and what you really need for these features is the specialized drivers written for the specific in your HP PC hardware - and unfortunately, there is no driver HP Win10 for your PC. HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.
  
  This means that your PC is probably NEVER going to be fully functional under Win10 because the pilots is needs for all features simply do not exist!

  So basically, you shouldn't spend your PC at Win10.

  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================