HP Compaq Pro 4300 All in One – Wireless NIC will not install

Hey everybody.

I got a doozy and I can't understand it.

I have a HP Compaq Pro 4300 AIO

I have Win 7 Enterprise 32-bit

All the drivers seem to be installed correctly, however when it comes to woreless NIC, it won't load. I tried all the drivers available on the HP support page.  The software loads and then stops.  No error message, the program is complete without the driver.

Any suggestions?

Thank you

Alllllrighty.    It was the question.  On the HP website, the Intel network driver is not for a wireless network card.  However, when I installed the wireless drivers Intel for xx70-xx75 Elitebook series, it loaded correctly.

Tags: HP Desktops

Similar Questions

  • HP Photosmart C4780 all-in-One: Photosmart C4780 will not install on laptop dv7 Pavilin

    My C4780 will not install on my computer laptop dv7. I downloaded the current software on the HP site and tried to use the disc that came with the printer. In both cases, that the installation program begins to run, goes through four steps and when it is installing updates, it disappears from the screen. I do not understand that because it has been installed and operating at once through my wireless network and still work on my desk. I totally uninstalled all the software before you try to reinstall. I even checked to ensure that the appropriate records were in place after not install for the first time. I went through this about six or eight times, try different things each time. I also disabled my antivirus (Panda Cloud AV) and that made no difference. At this point, I'm out of ideas and really need help. I also read some relevant posts in this forum without good results. I need help in the worst way! Thanks in advance for any help.

    Sorry it took so long to get back but things have been hectic. I really believe that my problem was one or more files that are damaged somewhere, so I took the easy way and installed Windows 10. After that I installed the printer and everything is fine now. But I really appreciate your help.

  • HP Deskjet 1510 all-in-One help! Will not install

    Hello

    So I bought a new printer (HP Deskjet 1510 all-in-One help) my Windows 8 Acer laptop, but it won't install. I tried the disc and online, I tried the help-majig trick but it won't install, when it says 'Install impossible' I click on details but it just comes up with "Installation Failed"... Yes, thanks for the help, Captain Obvious!

    I tried multipul times, upluged absolutely everything and rebooted my computer, but nothing happened.

    Help, please!

    -Sammie

     

    Hello

    Right click on the usb printing support in Device Manager and you get an option to update the drivers,

    Please select this option, it should update the usb drivers.

    Concerning

    HP

  • HP Compaq Pro 6300 all-in - One desktop PC Touch Panel does not

    I have a new HP Compaq 6300 Pro all-in-one desktop PC. It came with Windows 7 32 bit preinstalled, but I wanted to Win 7 64 bit so I had to do a clean install and therefore lost all my drivers.

    I was able to get most of the drivers I need HP driver download page for my specific model, but the touch screen under the screen no longer works. It certainly worked until I changed the operating system. To clarify, this is a sign of close contact under the screen that allows you to mute sound, change the volume or change the brightness. The control panel items are invisible until you touch it, how the options - this feature still works. They light up, but do nothing for the levels of noise or the brightness.

    I don't know much about the drivers, but this seems to be a driver for me problem. Does anyone have any ideas on how I could get the touch screen works again, because it is an interesting possibility, I'd like to be able to use.

    Thanks in advance.

    Hey, no one has responded to my request, but just Serendipity led me to the solution, so I'll post it here in case someone else has the same problem.

    In his search for information about installing additional RAM memory, I found myself in the correct name of the touch screen, I had a problem with: capacitive controls, aka buttons capsense. Once I got the correct term was a few seconds before I got the solution, see:

    HP all-in-one control panel Button for Windows Support

    According to the HP support page, the little softPaq provided "patches a question wherein Capsense buttons (mute, Mic, theft and theft down) of your computer do not work after manually installing a version of Windows", reinsert the necessary registry key.

    The softPaq (sp60481.exe) worked well for Windows 7 64 bit on my HP Compaq Pro 6300 all-in-one and I am very happy to have this cool touchscreen works again.

  • I have a hp photosmart C6380 all-in-one and it will not print

    PRINTER

    I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

    Hello

    Make sure that your print spooler service is started.

    At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

    a. Click Start, type services.msc and press ENTER.
    b. scroll down to print spooler.
    c. start the print spooler service.
  • HP Officejet 4500 all-in - One Printer - G510g will not print * sends an e-mail to yahoo my Yahoo or att.

    Win 7. HP Officejet 4500 all-in-One Printer - G510g does not print e-mails generated by yahoo my Yahoo or att.

    * prints the header only. OK, Juno & Hotmail prints. Have tried to reinstall the software to print, etc..

    Thank you

    Com63

    I'm sorry you have a problem with the printing of Yahoo.

    See if you can print from another program, such as, (firefox, Safari, etc.).

  • I have a hp photosmart c7250 all-in-one wireless radio does not work

    I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

    We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

  • c7180 Photosmart all-in-one: some emails will not be printed

    some emails will not print. I unplugged the printer - still does not print. also, these emails do not fit into the page - have to landscape.

    @missouri97

    Assuming that you have installed the full function of the printer software, it is probably not the printer to blame.

    Printer:

    All-in-one printer, HP Photosmart C7180 range

    Full software features:

    File name: AIO_CDA_FSW_Full_Win_WW_140_408 - 5.exe

    The browser you use to view the emails aren't always the settings you need (for example, Page Setup to adjust the size / width Fit).

    The browser or program may be missing parameters in order to translate something that the printer can understand the content.  Strange fonts or images in the content is a possible cause of printing email problems.

    Other...

    Chrome provides little in the way of the configurations - a singularity in the browser Chrome as it shows on my system Windows 10 Pro:

    Chrome > open web page > settings > print > additional settings >

    Most of the content of the page (to print) does not appear on the preview screen.

    Click on the graphics to UNCHECK > click again to CHECK the graphics >

    and the graphics and the text finally appear as expected...

    • Try another browser to open the email
    • If not using a Navigator > check the print settings in the e-mail program, you use
    • If all else fails, download / Snipcontent, save and print the data as an image
    • Reinstall / update your PDF reader (Adobe Reader DC / Foxit)

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • HP Photosmart C4700 all-in - One series Printer will not reinstall

    Hello.  I have a HP C4700 all-in - One Printer.  I don't have literal no computer knowledge.  We have installed a new router that came with a password so I had to change all the devices.  The printer is offline.  I tried to fix it as said.  No options as they said came.  Told me to uninstall it and install.  I tried.  The disc comes only with output.  I thought that I uninstalled the printer, but it is still on the list.  I emptied the trash and restarted the laptop.  I use the wireless printer.  I don't know what to do.  I don't want to continue unistalling programs and uninstall something important to the laptop.  Its a good laptop.  Fear and need assistance please.

    Hi @HPBearLax,

    In my previous post, I've linked documents that offer instructions on how to set up you wireless printer. This includes instructions on how to move from a USB connection to a wireless connection, as well as some Wi - Fi troubleshooting steps.

    Please try these steps and let me know if you are able to connect up your wireless network.

  • DeskJet 3050 a all-in-one J611 series will not print office with windows 8

    Hello, I'm setting up my office of engaged couples to my HP DESKJET 3050 ALL-IN-ONE J611 a series. It is said that he only supports the other windows, windows 8 not being is not one of them. Two are wireless and I thought that there must be a way to download a software that I can install in order to connect to this computer. Please any help I could get would be appreciated.

    Hi there @tabatha46

    Welcome to the forums

    Yes, the Deskjet 3050 a printer is compatible with Windows 8, and I will share a link below to download the driver and software. If you have any questions, please let me know and I'll do my best to help!

    HP Deskjet full feature software and drivers

    Happy Wednesday

  • HP Photosmart all-in - one a 309 will not print from the main computer in network

    PULLING MY HAIR OUT and have spent endless hours trying to figure this one already, so any advice will be appreciated! This 'deal' of a printer had problems in time over the 18 months or so I got it, but this one takes the cake. My HP Pavilion 6140, Windows 7, 64-bit, isn't wireless, but is connected to a router. My 309 a is wireless, but is in the same room near my computer and is recognized on the network. My husband's computer is sitting across from home in his office and can print wireless from my printer. Sitting here beside him, I can't print anything. We were able to print test pages from it to my computer, but if I go to another file of any type of printing, the printer does nothing. We have uninstalled, reinstalled, tried drivers d/l. He tells us that we need a driver, but when we go to d/l, it says no driver needed, or your drivers are up to date. My crazy husband DID with the router last weekend, on the moment cela everything has started, but since he checked it out, and everything seems fine. Copy the scanner work very well, so printing them isn't a problem either. I can save a file from my computer to the network, run in there and shoot to the top of this file and send it to my printer to print. No problem.  So, can anyone please give me any suggestions as to why my computer is unable to send anything to the printer or the printer does not recognize. Control Panel says it all works well, and the printer is ready. If I go into the properties of the computer, it says "drivers for this device are not installed, code 28. We had other messages of error as well in recent days, but nothing has been solved little matter what we do. Also MY computer doesn't list MY printer in the choice IF I try to print, and it says "printer unknown error has occurred."

    HardBeatZ, I wanted to just say a last thank you for all your help with my computer/printer problems. I hope I won't need this forum in the near future, because once again, I had to choose a different password. Yikes! In any case, we've been on all the roller coaster of emotions these past few weeks. Once you and I spread the printer as being the problem, we have debated on buying a new computer or reload Windows. After shopping and comparison of computers and prices see on them, etc., we decided that we had nothing to lose. So we borrowed an external drive and loaded important data and reinstalled Windows. Once we did that, we could still see the printer on the network, and it would still print from her husband's computer, but not mine. However, it DOES not seem to take care of other issues, and the dreaded exclamation point next to the PC icon has disappeared, so I'm gutsy and reinstalled the printer. For some reason, it still does not work wireless from my computer (which he always did), but I plugged the USB cable and returned to printing, scanning and faxing capabilities. so, I hope that all is well now, and except for paying ridiculous shipping for return monitor (still in warranty) which is released before printer problems, we did not have to shell out the $$$ for computer or printer. Monitor is shipped to me right now, so here's hoping that $$ on shipping was not in vain. Now if only we could be repaid in $$$ for the moment, concern and effort we all time put them into this mess. It WAS definitely a learning experience, even if, in the future, that I'll be a lot less worried to the excavation to solve problems. Thanks again for your time and patience.

  • scanner doesn't work now on an hp photosmart c7180 all in one solution Center will not come on i', running on vista

    My scanner used to work on my vista machine, now it does not work. When you try to open the center of solutions for my photosmart c7180 all in one i get an unrecognized message just after a momentary flash of the starting solution Center screen.

    Hello

    What is the complete error message you get?

    Follow the steps below and check if that helps.

    Method 1: Troubleshoot scanning.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

    Method 2: I suggest you install drivers for HP photosmart c7180 all in one manually from the manufacturer's Web site.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=1153754&

    See also: messages of error & lights.

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=2697&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=1153754

  • All-in-one HP 6525 does not install correctly

    Hello and hope you can help me. I tried looking for the answer to my problem in the previous posts of the forum but could not find anything useful for me.

    I bought the printer about a month ago, I installed it without any problem (wireless), but at some point, I couldn't use the scan function. I had to use the USB connection to make. I thought about uninstalling resettlement of amd, but several problems have emerged. Now, I can not install all the features, scan function does not work wireless, not to mention eprint. I have removed all HP registry keys before reinstalling the software still does not work. When I get to the control network environment, the program blocks. The printer is connected to the wireless network, it shows even documents.

    Please, can you help me?

    Hi @ionelaiordan

    I understand that you have already uninstall it and tried to install it, but the following steps may resolve the software questions have expressed you;

    1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%

    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted

    3. The new software - uninstall the printer software Instructions

    4. Once the uninstall is complete, reboot the computer

    5. Follow these steps to reset the registry settings and options for Windows Installer.

      • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

      • In the Open box, type msiexec /Unregister, and then click OK.

      • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

      • In the Open box, type msiexec/regserver, and then click OK

         * Note: there is a space between the c and the /.

         

        If you do not at this stage, use this link to perform another way. Restart Windows install

    6. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup

    7. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html

    8. Perform a clean boot > How to perform a boot in Windows

    9. Download the following SP40669 file download - if this download and or install, please proceed to the next step.

    10. Disable real-time scanning and the firewalls; The image below is an example of McAfee, if you have another antivirus program and need help to disable the analysis in real-time and firewall let me know.

      Source of the image

    11. Download and run the HP printer install wizard for Windows

    The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

    Please let me know the results of these efforts.

  • All-in-one OfficeJet 6110 will not scan.

    I reinstalled and hardware (scanner) is recognized but will not give the ability to scan. I use Windows 7 32-bit but also windows virtual XP.  This problem has been uninstigated.  Does not work under XP 7 or virtual.

    I found this document which indicates the front button functions are limited in Windows 7, so if you try to scan form, it just will not work.  I also found this document which shows you all the different ways that you can scan with Windows 7.  Hope these helps.

  • HP Photosmart B110 all-in-one: wireless printing is not possible

    Hello

    I have my printer connected to my desktop via USB and other computers connect using my wireless network. Sometimes printing from one of the other computers works, sometimes it doesn't.

    If printing does not work I have check the printer and it is connected to the correct network and online. I check the IP address and all withdrew. The computer that I use to print is connected to the same network and sees the printer as being online.

    If I send a document to print, it is added to the queue, and then sits there. With the status of"impression". But nothing happens...

    Today, I tried to delete the printer and add it again. Still no luck. What is going on?

    Hi @Plantje1978,

    Welcome to the HP Forums!

    I understand that you can not print with your HP Photosmart B110, on 10 of Windows wireless. I'm happy to discuss this issue for you!

    Please, try the following steps:

    Step 1: Check if the printer is paused or offline

Maybe you are looking for

  • Lock the Page?

    Is there a way to "lock" one page above the other in order to take notes on the top to the bottom and do not have the page 'Above' disappear? I love working with several tabs open and wish to have a something like my email or a word document open to

  • Everythings gone Norton toolbar, Extension tab/Favorites etc.

    A place on the right side of the computer alerted me of updates available... Mozilla has been one... I chose it and it seemed that he didn't know that I already have mozilla, said ready to install mozilla. Anyway, now my Norton does not work and I sp

  • Connection / syncing my iphone to Mac

    My husband and I had an iPhone 6s.  Previously, he was an Apple ID and is able to connect / sync to our MacBook Pro iCal and iTunes.  I created my own Apple ID, but I can't seem to synchronize with our iCal on the Macbook Pro.  How to fix this?

  • The update level of RAM, MacBook2, 1

    Hi people, This is my first time using the support communities, and afterwards, I don't know if I placed my question in the right place. Anyway, recently I got a 2006 end white MacBook (identifier MacBook2, 1) by a friend. The vehicle currently has 1

  • internal error #2

    When I try to open my friend made software I more a mistake."Internal Error #2: Please make sure that the application is running and on the license screen. Please tell me what is it and why it comes every time? I use windows 7