HP Compaq Pro 6300 short SMART test failed

Similar Questions

• Pavilion p6330f PC: SMART Test: SMART short Self Test FAILED

  I had so many problems with this computer. Whenever I have turn it off then go turn back will go to Recovery Manager. I did run the computer health check and did the basic test and Test drive both hard say Test INTELLIGENT: SMART short Self Test FAILED. What does that mean?!

  Hello

  It simply means: the HARD drive is about to die. Please save all your data if you could and be prepared to replace the HARD drive. Is your machine still under warranty? If so, please contact HP for replacement

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Kind regards.

• Hardware diagnostics: "SMART short Self Test - failed" and "targeted read Test Failed.

  Original title: "SMART short Self Test - failed" and "targeted read Test Failed", all the patches?

  When using PC checkup of Dell I get the following errors; during the analysis of the material. "SMART short self-test - failed" and "targeted read Test Failed", all the patches?

  Hello Duane,

  Teke section of the Web site that speaks of similar problem.

  http://forums.techguy.org/hardware/906455-smart-short-self-test-fail.html

  The problem is with the hardware and you can get in touch with Dell computers.

• XPS12 SMART short self-test fail WHD16 LY6

  "When you run the Dell ' Checkup" utility on the SSD drive, the drive will fail with:

  SMART short self-test fails WHD16 LY6

  The remaining tests are ignored. The suggestion is to update the firmware. However, my drive is:

  LITEONIT LMT-256M6M 256GB mSATA

  and I can only find firmware on the Dell site for both LITEONIT SSD 256 GB drives, or precisely what mine are. (Only LITEONIT LCS-256M6S 2.5 256 GB and LITEONIT LMT-256M3M MSATA 256Go are listed).

  I have the latest drivers for the disk (9Q23_Storage_Driver_X6KKJ_WN_11.5.0.1207_A01. (EXE)

  Are there available firmware, and if so where is it please? Otherwise, what is the next step?

  Thank you.

  Thanks, EJN - F12 diagnostics appear clean. I guess that I'm worried about this then.

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• Adding a second monitor to HP Compaq Pro 6300 AiO

  I would like to add a second monitor to my HP Compaq Pro 6300 AiO, but it doesn't have a RGB port. The extra monitor I want to add is the HP L1750, but I don't know what cable to buy or if it's possible?

  The required cable is a displayport to VGA or DVI or HDMI connector to connect to a second screen with an HDMI input.

  This is the reference guide: material for your PC

  

• Memory / RAM upgrade - the standard issue! -HP Compaq Pro 6300 microtour

  Hello

  I intend to increase the RAM in this machine (Microtour HP Compaq Pro 6300) and I'm a bit confused to a specification - latency CASE.

  To start:
  I plan to purchase memory from a manufacturer of renowned as Crucial or Corsair and purchase identical sticks to replace the OEM memory.

  My understanding of the requirements of CASE latency for this system:
  According to the reference guide of the material that was provided with this PC, "the DIMM DDR3-SDRAM modules must also:... to support latency CASE 11 DDR3 1600 MHz (at a date 11/11/11)."

  My understanding of the CASE latency spec. offer of products available:

  Many kits that I found almost total retail prices are advertised as being "CS7,' 'CS9', or 'CS10 '.  The few kits that I found with latency = announced 11 CASES are much more expensive (+ 20%) that those with CL = 7,9,10 (spend less money without wasting on inoperable RAM is my goal).

  My question (s):

  I have to buy memory with a latency announced CASES of 11 cycles?
  -OR-
  May memory stick with another announced specification of latency CASE (no CL = 11) function properly with my system?  If so, could it be some additional steps to configure the new installation of memory or any foreseeable to overcome obstacles?

  Thank you very much for taking the time to read this and respond!
  -Mark T.

  In General, purchase memory with lower CASE ribs won't be a problem, as long as the dominant spec (i.e. DDR3-12800) memory and memory voltage specifications match.

  If you buy from a name brand as Crucial or Corsair, however, you should probably ask him if they have specifically tailored to your system memory. They have usually memory specifically designed for brand like HP systems, and that would be your best bet to ensure compatibility.

• HP Compaq Pro 6300 all-in - One desktop PC Touch Panel does not

  I have a new HP Compaq 6300 Pro all-in-one desktop PC. It came with Windows 7 32 bit preinstalled, but I wanted to Win 7 64 bit so I had to do a clean install and therefore lost all my drivers.

  I was able to get most of the drivers I need HP driver download page for my specific model, but the touch screen under the screen no longer works. It certainly worked until I changed the operating system. To clarify, this is a sign of close contact under the screen that allows you to mute sound, change the volume or change the brightness. The control panel items are invisible until you touch it, how the options - this feature still works. They light up, but do nothing for the levels of noise or the brightness.

  I don't know much about the drivers, but this seems to be a driver for me problem. Does anyone have any ideas on how I could get the touch screen works again, because it is an interesting possibility, I'd like to be able to use.

  Thanks in advance.

  Hey, no one has responded to my request, but just Serendipity led me to the solution, so I'll post it here in case someone else has the same problem.

  In his search for information about installing additional RAM memory, I found myself in the correct name of the touch screen, I had a problem with: capacitive controls, aka buttons capsense. Once I got the correct term was a few seconds before I got the solution, see:

  HP all-in-one control panel Button for Windows Support

  According to the HP support page, the little softPaq provided "patches a question wherein Capsense buttons (mute, Mic, theft and theft down) of your computer do not work after manually installing a version of Windows", reinsert the necessary registry key.

  The softPaq (sp60481.exe) worked well for Windows 7 64 bit on my HP Compaq Pro 6300 all-in-one and I am very happy to have this cool touchscreen works again.

• BioHD-8 error code a smart test failed on the drive

  I am running vista Home premium that came pre-installed (so I don't have a disc) on a hp pavilion slimline S3500f

  I had a problem when windows wouldn't load, just kept freezing and restarting a couple of times before it load.

  I was recommended to change my graphics card, which I did and windows starts to load and then arrested again.

  Then I got a blue screen Uni, when I ran a diagnostic test, I got an error code BioHD-8 a smart test failed on the drive

  I have Norton anti-virus installed on the pc

  I would really appreciate your help on this, thanks in advance

  Hello
  I would suggest to run Startup Repair and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Otherwise, I suggest you post the question in the hp forum and check if that helps:
  http://h30434.www3.HP.com/T5/desktop-hardware/BD-p/HardwareDPC

  It will be useful.

• Targeted Test read and Smart short self-test failed!

  Help, please! Is there something to fix the underside of chess? Product: XPS 435 t/9000.  Western Digital: WDC WD5000AKS-75V0A0. The crash occurred after that my Tripp-lite didn't work properly in a power failure. Targeted reading test
  Test started		17/09/2013-09:22:13
  Error message:	Error reading sector 27214298.	17/09/2013-09:22:34
  Error message:	The test found errors in sector 1.	17/09/2013-09:22:34
  Completion test:	Failed (error code: WHD20-B3A)

  Short what SMART self-test
  Test started		17/09/2013-09:25:03
  Error message:	The unit has reported the following State: the previous self-test completed having the read element of the test failed.	17/09/2013-09:26:15
  Error message:	The first default LBA value is 27214298 and the failure occurred after that the device was working since 13979 hours under tension.	17/09/2013-09:26:15
  Completion test:	Failed (error code: WHD16-3DY)

  Jan

  It is likely that you will need to replace the hard drive.  To confirm, press F12 at startup, enter the Dell diagnostics.  Run an extended hard drive test.

  If the system is under warranty, logs the error and contact Dell for a replacement drive.

  If the system is out of warranty, any standard 3.5 "SATA drive will work as a replacement.

• TouchSmart 15-d053cl: disk hard short DST Test failed

  Hello

  Recently, my computer froze completely, and I stopped him with a long press on the power button. When I turned it back on, Windows would not start. It would not start for a very long time and finally the hard drive would become inactive. I open the BIOS diagnostics and ran a test of the system. I got the following error message:

  Test of DST short hard disk failed

  Error code: RLLFTT - 7717 ST-MFKR6J - 60S 003

  Product ID: F5Y25UA #ABA

  Does this mean that my hard drive is defective? Since I've been able to boot into Windows, but it runs a lot slower. Do I need to worry? I ran Chkdsk, but he finds no errors. My files are still in place and I am able to access very well. What should I do about it?

  Thank you!

  KP

  Kpenguin wrote:

  Hello

  Recently, my computer froze completely, and I stopped him with a long press on the power button. When I turned it back on, Windows would not start. It would not start for a very long time and finally the hard drive would become inactive. I open the BIOS diagnostics and ran a test of the system. I got the following error message:

  Test of DST short hard disk failed

  Error code: RLLFTT - 7717 ST-MFKR6J - 60S 003

  Product ID: F5Y25UA #ABA

  Does this mean that my hard drive is defective? Since I've been able to boot into Windows, but it runs a lot slower. Do I need to worry? I ran Chkdsk, but he finds no errors. My files are still in place and I am able to access very well. What should I do about it?

  Thank you!

  KP

  Your hard drive is defective and must be replaced.  You can continue to use your system as-is, but it will continue to get slower and, possibly, you will have problems to start as you have done before.  It is recommended that you back up of your data (photos, documents, etc.) on external media (flash drive) and then replace the hard disk.  After replacing the drive hard, you have to reinstall the Windows operating system using the HP recovery media.

  It is not very difficult not expensive to replace the hard drive, so we can walk you through it.  If you are in warranty, you can contact HP for replacement parts.  If you are out of warranty, then you need to buy a replacement hard drive and the HP recovery media.

• BIOHD - 8 A SMART test failed

  I have a PC HP Touch Smart 300 and have had it for 8 months with no problems. He suddenly began to slow down & gel (I am able to move the cursor, but unable to close all windows or shut down correctly on pc) I am also unable to access the Manager of tasks due to an error message. I ran the HP startup diagnostics and received the following message: BIOHD-8 A SMART test ST3750528AS (5VP4W8LJ) test failure. I tried to run the system restore, but it has been unable to find restore points. I have download the upgrade 4 on the drive from another pc and install it manually to see if that helps. Thanks in advance for the answers.   Here are some additional features:

  Running Windows 7

  Model No. 300-1223

  No. WW645AA-ABA

  Serial number {removed privacy}

  Software Build No. A1NAv6PrA8

  Service ID no. 061-71

  Pavilion

  Hello

  The error you get - BIOHD-8 - indeed indicates that your hard drive is defective and you need to replace it with a new HARD drive.

  Kind regards

  DP - K

• Im getting a smart test failed on the hard drive - HDBIO-8 faults - contact HP support. Help

  I have an office of A6500f.  I had starting problems. I have run the smart test and had a disk failure with error HDBIO-8 contact HP support.

  I tried to reload the default configuration and all other means to boot the machine, but it crashes on the Welcome screen.

  Hello

  Should be BIOHD-8 , which means that your HARD drive is dead, please collect any data you must collect (if you can) and replace the hard drive at the same time practical.

  Good luck

• Hard drive failure: targeted read Test failed, SMART short self test FAILED

  Suddenly, I get this popup to My Dell saying that my computer has failed two important tests and the hard disk failure is imminent. It scared me so much I almost fell of my computer Chair, so I came here to help... my computer is a Dell Inspiron 15R 2012 5520 and error codes are:

  

  I saw the other topics on this, but just in case, I wanted to do this one. I'm really afraid that all my files will be lost, because I don't have anywhere to store up to. I tried the cloud, but my connection is not good enough and it is really slow and sometimes just will not work. Also, sometimes when I press my ear to the laptop, I hear a soft grinding, which I guess was the failed hard drive. I don't think I've heard that noise before, but he could have been there since I bought the laptop.  Any help would be greatly appreciated.

  UPDATE: I ran CHKDSK and it only took a few seconds for him to know that my hard drive is fine, although my Dell seems to think otherwise. What should I trust?

  4590 X

  You will need to replace the hard drive failed, followed by reinstalling windows.

  If there is a warranty from Dell, contact Dell technical support for replacement drive, no guarantee, you will need to purchase a laptop SATA, 9.5 MM x 2.5 "hard drive.

  With regard to the recovery of the data files and folders, you can try attaching the failed hard drive to another system that works using a similar to THIS USB adapter and see if you can transfer files and folders.

  Applications and programs need to be reinstalled from their records, or downloaded from the website of the Publisher.

  Bev.

• Smart short self-test failed. HP Pavilion p6232p Desktop PC with nothing installed again.

  1

  Hello:

  This message usually means that the hard drive has failed and needs to be replaced.