HP CS4280 scan to Mac

Similar Questions

• How can I get rid of a redirect virus. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  I'm on MacBook Pro (retina, 15 inch, mid-2015) how can I get rid of a redirect virus. I use Google Chrome. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  http://Syndication.ExoClick.com/splash.php?IDZone=1758202&type=8

  It's the kind of redirects that I get all the time

• My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

  Best regards, David

• HP Photo Smart 110 will print and copy but will not scan for Mac.

  Recently switched to Mac computer HP. My HP Photo Smart 110 will print and copy but will not scan for Mac. I need to download a program for my Mac for scanning?

  Thank you!

  OK, take a look at this document; http://support.HP.com/us-en/document/c03379337

  Scroll to the frequently asked questions and click on one of the way to analyze the options. It really depends on how you installed your printer, but you should be able to use the print window & scanning.

  Let me know if works

• Scanner will not scan on Mac.

  Hello

  All of a sudden that my printer (Photosmart C6380) refuses to scan what either on my Mac. I go to the scanner that I would normally the Photosmart studio and select scan. The scanner then begins to initialize, then: "an unknown error has occurred" pop up appears. I did not what is wrong because it's all pop up says, he won't go into details in addition so I have no idea what actually is this error. I tried scanning my other printer HP (Deskjet F4280) and it came with the same error. I even tried the scan using my Macbook and I get the same error too. I also tried scanning the Mac to the printer, then the printer initializes and freezes I have to restart the printer.

  I recently installed Mac OS X Snow Leopard on both Mac and that could be the reasoning of the problem, but the printer works without any problem. It just seems to be the scanner itself.

  Thanks in advance.

  On the right column is where you tell the file name, type, location, etc.  When you click on the Scan button it saves it (he actually does scan yet).

  Define a location and a file name to test.

• DeskJet HP 3830: impossible to activate the scan on mac for 3830 aio

  Impossible to enable analysis of the computer using the hp utility or by using easy scan, but can analyze whether I go to System Preferences and then printers then scan that works very well, I tried to remove and reinstall several times but it makes no difference.

  The connection to the printer over the network and works very well on printing as well if it's not a connection issue.

  Any help would be useful

  Hello
  In the Applications folder or its subfolder HP remove all existing HP Scan or app HP Easy Scan by moving it to the trash, then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Now, check if you can see a difference when accessing the HP utility
  Kind regards
  Shlomi

• ENVY 100 series D410: Envy 100 D410 series will not scan with Mac OS Sierra 10.12

  Hello, I just bought a new Mac, and I have the Mac OS Sierra 10.12

  The printer works fine but I can't scan.

  I do not have the scanner HP 3 that previously had on my other computer and I don't have the installation CD.

  I can't find the software online. He said that HP still has the software to make it work, but I can't.

  I tried the HP Easy Scan but I need the previous software that I don't.

  What can I do?

  Thank you

  Sabrina

  @Sab7

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand the scan does not work on the BONE of the Sierra.

  Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

  • Image capture
  • Overview
  • Printers and Fax preferences in system preferences
  • Scanner / printer queue

  The basics of the Mac: using a scanner

  I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

  For links related, please here.

  To troubleshoot the macOS Sierra problems: click here

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• PhotoSmart 5520: Cannot scan on Mac

  Cannot parse after upgrade to Mac OS Siera 10.12.

  Hi back.

  I have a MacBook Pro with HP Easy Scan download and a HP Photosmart 5520. This is what works for me.

  1. start or restart 5520.

  2. place the point on the scanner and click the HP Easy Scan.

  3. follow the instructions.

  So far, he has work, but don't rest on that, Get HP. your stuff just with OS Sierra, 10.12.

  Paul

• LaserJet M277n: Cannot scan from Mac

  I just bought a LaserJet M277n and connected to my home network.

  I can print from my MacBook. I can copy the printer.

  I can't scan.

  I downloaded the HP EasyScan software, but that does not work either.

  For the Capture of Image Mac software and the EasyScan HP open programs and they will see

  the scanner but nothing else.

  If I select 'Preview' Capture of image scanner makes a noise and the light goes from one end to

  the other, but no preview is displayed. There is a dark gray area where the usuall overview showing.

  If I select "analyze" the little wheel goes round next to the name of the printer on the left, but nothing happens.

  Any help would be greatly appreciated.

  Thank you.

  Skoot

  Hi Skoot,

  The link above refers to the firmware, not for the software, these aren't the same things...

  In the configuration Menu, select reports, then the Config report.

  In the product information section, which is the listed firmware datecode?

• HP Photo Smart D5110 will not scan with Mac OS 10.9

  Help. I've looked everywhere and can't always come up with a solution to scan from my Photosmart. Worked fine until I upgraded to Maverick. Thank you!

  WelchSHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking in your scanning options. I would try to help.

  Due to the age of the printer, there is no HP software for this printer on Mavericks.  You can, however, use the characters of basic Mac OS and drivers to scan.  I'm including a document on the installation and using the printer on a Macthat should help you to solve this particular section of the document titled "How to scan with Apple software update driver?"

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• HP Photosmart 5510d: series HP photosmart 5510d used to scanning for Mac

  Unable to get HP Photosmart 5510d scanner the computer no more.  I uninstalled it, downloaded a new driver, tried to get going again and again, it does not analyze.

  Hello @Biebs and welcome to the Forums of HP, I hope you enjoy your experience!

  I understand that you are having problems scanning Mac.  I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend you to reinstall HP Photosmart 5510 e - All - in - One printer full feature software and drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• pages scanning multiple mac photosmart hp 309 has

  I need help: I want to scan multiple pages into a single document pfd with Hp photosmart premium 309 a on a mac os x... How can I do? Furthermore, I don't want with a lot Mo... help me!

  Hi eva232,

  Here are the steps to scan using the Image Capture on the computer.

  1. to begin, launch the Image Capture in the Applications folder on your hard drive.

  2. once the application is open, select go devices... in the devices menu. If your scanner is listed, select it and click the Use Twain UI button in the upper right pane.

  3. another opens and you can set a limited number of scanning options.

  4. click on the next button download for select the location on your hard drive for the scanned image or document.

  5. type a name for the saved file and select the image you want in the drop-down list beside format of Format. You have three options: JPEG, TIFF, PNG.

  6. change the settings if necessary, and then click Search

• When you try to scan, print says "configure the pc to start scan. using mac.

  When you try to scan on PIXMA MG5722 I get the message 'set the PC to start scan.  I can scan marketing PC but no printer.  With the help of iMac.  Need to scan documents on the printer using the printer scan button.  How can I fix it?

  Hello.

  According to the version of Mac OS x that is on your computer, you may need to scan using the software on your Mac.

  If you use OS 10.11, please scan from the Scan IJ utility instead.  This program are in the Canon Utilities folder in Applications.

  If you need additional help in this issue, find more help contact us.

• HP Color Laserjet Pro M477fnw: Scanning for MAC

  I tried to analyze documents on my Mac for my printer without success.  I am connected to the wireless printer and I am unable to print to the printer with all the problems.  The scanning portion connects simply cannot.  I followed the instructions in the HP utility, but wasn't able to scan once the process is complete.  I also contacted HP and the representative said that he could not help because he was only qualified to help with Windows products only, but no one was available to help with Mac products.  Any help would be greatly appreciated.  Thank you.

  It seems that I found a solution within the Mac itself in the application of the United Nations the HP Easy Scan icon and image caputure icon and mapping it and it prints in these environments.

• C4780 will not scan in mac Mavrick, worked fine before update

  I have an iMac and upgraded to Mavrick. Now my scanner, Photosmart C4780, does not scan. I have HP scan, 2.4.0(5), that has worked well before. I can't find an upgrade to scan from HP on the web site. When I use it, nothing happens and I have to use Force quit to turn it off. Suggestion? Thank you

  Hello DKF1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post on the problems you are having with a sweep on the Mavericks.  I checked the drivers available and there is no driver available for the Mavericks scanning. However, there are solutions to analyze.

  Click on the link below and choose 'How to scan with the Apple Software Update driver?' and then you will see 3 methods, choose one of them.

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  I hope this helps.

  Take care