HP DC5800 SFF PC (NV321UA #ABA) 32-bit

Similar Questions

• HP compaq dc5800 SFF: Trusted Platform Module 1.2

  Hello I have a desktop HP Compaq dc5800 SFF pc. I need driver for Trusted Platform Module 1.2, my hardware is: ACPI\IFX0102 * IFX0102

  Go to Device Manager and click on the device TPM that need the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp40553.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If it isn't, I suggest you to install the latest chipset driver Intel for your PC and if you have not been updated to W7 SP1, do, because as I said, there is no need to install this driver on Vista or W7.

  Here's the latest Intel chipset driver for pc... Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• dc5800 SFF: HP dc5800 SFF: firmware Install with new processor Q9400

  I have a HP dc5800 SFF with a core 2 duo dual core cpu. Checking the list of caught CPU supported, I installed a cpu Q9400 supported. Started the machine and got an error in the microcode. Research and found that I needed to download the firmware file that I made this site, the file is called "sp51245.exe."

  How to install this file? The computer does not start, gives just the firmware error. Restore the old CPU to then run the firmware file so I install the Q9400?

  Sorry, that didn't work.

  The only other suggestion I can offer would be updated the BIOS with the latest version.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658095&swItemId=vc_97162_1&swEnvOid=2103

  To update the BIOS, you take a USB flash drive, format it with the FAT32 file system.  Do not make the bootable disc.

  Copy the contents of the file flash BACK found in the BIOS update file (launch the executable and it will open a help page and you can copy the files from this page by clicking on the link there).

  With the flash drive connected in the USB of the PC port boot, press the F10 key to access the BIOS.

  On the file menu, there will be an option ROM Flash System.

  Select this option and follow the instructions on the screen to Flash the BIOS.

  If all goes well, that will remove the microcode update error.

  Just keyboard, mouse, monitor and drive connected to the computer when you Flash the BIOS.

  If that does not clear the error, unfortunately, I won't have any other suggestions for you.

  As you know the processors you tried are taken in charge in the PC and why they don't work, I have no idea.

  For your convenience, I attached the files to update the BIOS below... once again, you unzip the files and copy the contents of the file in the folder in your drive formatted FAT 32.

• HP compaq dc5800 sff: install a new graphics card

  Hello

  I bought a 240 r7 radeon graphics card to upgrade my hp dc5800 sff, it is running on the q33 chipset from intel.

  How to install this new graphics card? I want to talk about the installation of the drivers, not the placement in the pc itself.

  I read somewhere that I first need to uninstall the drivers from the chipset, q33 before putting the card in my pc, is it true? If Yes, how should I do it OK?

  If not, can I just put it in the case, plug in my monitor inside and start the pc, then install the drivers from the disk?

  Thank you

  Hello

  It is very rare that the removal of the existing video driver is necessary before installing a new video card. Most video card manufacturers do not understand such a suggestion with instructions to install a new video card.

  However, if you still believe that you must work Yes, so that you can go through the program and features Control Panel to remove the video driver only. You can also use Driversweeper to clean up the video driver.  However, before removing the Chuck, make sure you have the original drivers downloaded to your desktop so that you don't have to hunt for him later if necessary.

  The AMD R7 240 does not yet in your PC according to the level of brand, model and vBIOS in the graphics card.  In addition, check power supply required for the 240 R7 which, from what I've read is 400 watts.

• dc5800 sff computer of office: purchase recovery disc for dc5800 sff system, model KA404UT #ABA

  I am the 2nd owner of computer and appears as former owner had installed a Dell on this HP operating system. would be OK but drive hard contains of disk errors that Windows cannot fix. Leading to intermittent shutdowns and all kinds of fluctuations to get a Win 7 upgrade disk to restart Windows. HP does not sell the RRD more. I'd be willing to pay for the discs, if someone has a set of left.

  Hello:

  Most of the dc5800 comes with Windows Vista Business or Vista Business downgraded to XP Pro, like yours, so HP has never had recovery disc for the dc5800 W7.

  https://h10057.www1.HP.com/ecomcat/hpcatalog/specs/provisioner/05/KA404UT.htm

  You call this number (USA/Canada) to see if HP recovery Vista Business left discs?

  Demand for 64-bit because otherwise you will get 32 bits.

  1-800-334-5144

  If they do not, you can still get a set of this provider not HP - looks like only 32-bit however.

  You can call and ask if they have Vista Business 64-bit games.

  http://www.computersurgeons.com/p-18420-Windows-Vista-business-recovery-kit-gx022av-for-hpcompaq-model-number-dc5800-small-form-factor-PC.aspx

• dc5800 sff: bios dc5800

  I'll try to find an update of the bios for my dc5800 refurb, I now have 1.4 and have seen mention of a 1.59, but he can't find anywhere. I am a network technician, it's kinda an odd stub.

  Thank you!

  I found the BIOS that was requested.  A bit weird how to find it, but in any case, see here:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658095 & swItemId = vc_97162_1 & swEnvOid = 2098 #Tab - History

• HP Compaq dc5800 SFF: HP compaq dc5800 format factor windows 7 audio driver

  I received the message in error message "no output device is installed" on the sound icon in the task bar bar.  I don't understand why the driver of HP web page

  https://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3658095 & swLangOid = 8 & swEnvOid = 4052

  does not have the audio driver for the small frame factor dc5800 HP Compac PC company.  I'm of the view that other owners have had the problem of not being able to find a sound driver for this as well.

  The driver can be found here:

  (HD)-Audio-Driver-v.6.10.7255-Re.-A-for-Windows-7-(32-64-bit)-free https://us.driverscollection.com/_47316373665403689ce86efb0a3/download-HP-Compaq-dc5800-ADI-high-definition-

  I've successfully installed on my PC.

• PCI Simple Communications Controller driver for HP-Compaq dc5800 SFF

  In the device, other devices shows yellow exclamation with PCI Simple Communications Controller Manager.

  I found a few references to care packs, but none that really meet this model and the OS which is Windows 7 Enterprise 32-bit Edition.

  If you select the download button, it seems that here, the connection cannot connect to the FTP as happens with errors of popup like 425 can't open data connection.

  So two things has driver and is there a http download?

  Thank you

  Paul_Tikkanen wrote:
  

  Hello:

  You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3658082&prodNameId=3658094&swEnvOID=2096&swLang=13&mode=2&taskId=135&swItem=vc-78668-1

  Thanks that solved the problem of missing driver.

  Had to download off site due to firewall blocks FTP. But as an alternative would download flow anyway.

• HP Compaq 6000 Pro SFF Win 7 Pro 64-bit

  Need help installing RAM. 2 GB PC #-10600U 1333 Mhz supplied with computer. I try to install Crucial 8 GB DDR3 1333 mhz p/n ct102464ba1339.c16fed
  I put the new key in the black slot and the jury returns 5 beeps and a red front end light. I tried that, in my view, are all other possible compinations with the same result.
  HP said it is good RAM and should support up to 16 GB.
  I saw evrything I can find and still no solution. Thank you.

  Hello:

  The maximum memory each slot can take is multiplied by 4 slots 16 GB = 4 GB.

  Cannot install 2 x 8 GB or any single chip 8 GB to 16 GB.

  See the form below... page 10.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287311

• Compaq DC5800 sff: compaq dc5800 small form factor 4 monitors

  My machine is a Compaq dc 5800 small form factor. Running windows 7.

  Wondered what would be the best way to get four monitors to work on this machine. Different programs of 4 separate monitors 4 on each of them, what graphics card should I buyto achieve?

  I have a usb to vga thing that might work for a monitor, so this means that I need a chart of small form factor card that can work 2 or do I need one that will run 3. I read that once you install a graphics card, you can't activate the onboard graphics in the bios. I don't want to have this problem. Please help me.

  Thank you

  Here is the Manual:

  Manual

  You'll need a card video low - profile pci-e x 16. Even if you buy one with 3 outputs as a vga, one dvi and one HDMI usually you can only use 2.

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=7717576 & SRCCODE = WEBGOOPA & scid = scplp698686 & kpid = 7717576 & gclid = Cj0KEQiAiamlBRCgj83PiYm6 - gBEiQArnojDzV29tsehaj_KoZBvaF_tPNYEd-lz4cTMeNrlTNijXoaAjPg8P8HAQ & gclsrc = aw.ds

  And Yes, when you install an add-in pci-e video card, you will lose the integrated graphics card.

  In order to drive the moire than 2 monitors you need a second video card, or a multiple display adapter cable. You have a pci-e available x 1 slot and there is such a thing as a video card pci-e x 1 like this:

  http://www.Matrox.com/graphics/en/products/graphics_cards/m_series/m9120pluslpx1/

  http://www.Newegg.com/product/product.aspx?item=9SIA4UB1J73800

  Some of these x 1 cards actually have a quad cable optionally, you can add the display.

  These are not for gaming but can run extra for things monitors as having walked fellow RSS site or desktop computers more available to work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Compaq 6005 Pro SFF PC: use reference dell 531 parts s in my PC HP Compaq 6005 Pro SFF

  I try and speed up my computer, I have a computer dell 531 s this works (vista). Hard drive crashed. I was hopeing I could use something out of it. This is for my HP Compaq 6005 Pro SFF PC, SG972UC #ABA... Thank you... Mike

  Hello:

  Compare the specifications of the two models, it seems that the only thing you can use the hard drive, what said you was not good, so it does not work.

  The 6005 Pro uses different memory (DDR3) and 531's DDR2, which does not in a DDR3 slot.

  The 6005 uses another set of AMD processors and that of your 531 s will not work in the 6005 Pro.

• COMPAG HP dc5800 motherboard - what version of slots PCI Express-1 t - it have?

  I have a HP Compaq dc5800 p/n AK819AW #ABA.  I am thinking about adding a expansion card, but you should know which version of PCI Express-1 slots are on the motherboard.  They are the original or are they version 2.0?  Any help would be appreciated.  If you need more information on the computer please advise.

  Hello:

  Here is the link to the Intel chipset plug for the chipset of your PC.

  You will see the revision of PCI 1.1 listed.

  http://Ark.Intel.com/products/31917/Intel-82Q33-graphics-and-memory-controller

  I can tell you that I have personally installed a 2.1 PCIe card (Radeon HD 6570) in a CMT dc7800 who has express Q35 chip set and the specs intel for the Q35 also show a PCIe 1.1 revision.

  http://Ark.Intel.com/products/31918/Intel-82Q35-graphics-and-memory-controller

  I have the latest version of the BIOS installed on my dc7800.

• DC5800 compact Format: order of Installation of drivers

  Reinstall the operating system and all of a sudden I realized that I had no idea what I was doing in what concerns installation correctly drivers. I don't know there is a recommended order in which drivers should be installed. I fthere is for this specific computer, what would it be?

  DC5800s SFF, Dual Boot XPProx86 on HDD WD 80 GB, Vista Business x 64 SP3, SP2 on PlusII Maxtor 250 GB

  Pentium Dual Core E5200 processor 2.5 Ghz, 6 GB RAM PC2 - 5300, AMD Radeon HD5450, 512 MB, DVD - RW drive

  HD audio INT and NIC

  Not a lot of surprises. The add-on would only be the graphics card. Still I never thought so far, for some reason, that recommended install so that the drivers and the software of the system. I first installed the OS and the applicable service packs. After that, I want to know how to do properly. Thanks for any help I receive.

  Best regards, wilmos

  Hello:

  The only drivers that you need to worry about installing it in a specific order are these...

  1. install the Intel chipset installation and restart utility.

  2. install the applicable graphics driver and restart.

  3. install the audio driver and restarted.

  4 install the ethernet driver (cable network).

  Then you can install the other drivers in no particular order (if done reboot).

• DC5800 slow Intel 82566 DM-2 adapter problem

  Hello

  I DC5800 SFF base with adapter LAN 82566 DM-2.

  The problem is that its link speed cannot set to 100 Mbps when connected to the router DLINK GO RT 150 100Mbps port. When it is connected to the port of Cisco cable HGW 1 Gbps, there also 1 Gbps speed.

  I used sp44020.exe to upgrade the firmware of the NETWORK adapter, but no change in the link speed.

  # Fri SVen SDev Rev ST peripheral Dev
  -------------------------------------
  1. 8086 10BD 103C 281E 2 - Intel (r) 2-82566 DM Gigabit Network Connection

  What is the solution?

  Problem SOLVED by using Intel LAN PRO2KXP_v14_0.exe previous driver pack, instead of the last PRO2K3XP_32.exe.

  Programmers of Intel made a "last" bad pack pilot .

• G7 windows 8 - where is Bluetooth

  Pavilion laptop g7 (product number D1C20UA #ABA), 64 - bit Windows 8 bluetooth FILES and process, but does not recognize my bluetooth devices.
  
  I was told of this machine has bluetooth, but the routine to add a Bluetooth device is extremely rare, comes with 3 printers (Fax, MS XPS Document Writer and HP eprint), but fails to recognize bluetooth devices that allowed to see their broadcast.
  
  The GUI is unnecessary, and there is no options. What else to do.  I use my smartphone as wireless network connection... but I guess that bluetooth is a different processor; bluetooth related items in the file/folder structure include several files, i.e. amd64_microsoft-windows-bluetooth with several bluetoothAPI.dlls and obvious, but so far, the services associated with bluetooth are orders/manual (when I find the services that are running).

  Here are the specs - I don't see Bluetooth in the list, so where do I go to get it? http://support.HP.com/us-en/document/c03603962

  You can follow the steps below to determine if your computer has Bluetooth hardware installed.