HP DC7700 SFF: DC7700 SFF - No Beep with no ram, CPU hot, Hot, Hot GPU - STATION Chipset NOT

Hi I have a DC7700 who is not a beep or anything like that and no video display.  I have two we DC7700 SFF BIOS is damaged will need to perform a recovery of the standard BIOS I am guessing Via USB AND BIOS. WPH RIGHT?

https://www.BIOS-mods.com/BIOS-recovery/Phoenix-BIOS-recovery/

Try to get the Xeon L5320 at work that I got this message...

In any case DC7700 is not posting the cpu is hot, the northbridge is hot and the gpu gets hot.  Tone post with e6300 with ram.  I have two e6300 and tested both.  It will beep every time if I drill the cover on the lga775 socket, while it is on.  Otherwise, I get beeps...

Thank you

T7500 - Dual Xeon X 24 son @ Over 1 terabyte/s
16 GB Triple Channel DDR3 @ 35 GB/s
HyperDuo of e/s 1 TB + SSD @ slow b/c of $15 SSD
GTX 580 @ 900 Mhz @ 43 billion, 200 million pixels per second.

Thank you very much Sir for your advice, I appreciate it.  Thank you and have a nice day.

DC7700 has a cpu socket problem where it will blink red and beep if the cpu is not "sitting" remove the processor and replacement in different ways etc will allow it to function normally.  Well that does not support DC7700 Q6600 DC7800 sff motherboard would be in the order of $15 on ebay it fits dc7700 sff chassis.

* SOLVED *.

Ended up literally having an empty 2GB FAT16 USB FLASH DRIVE with only the last v116 bin to the root.  Start the PC with the USB in the port before, said flash has successfully and it is up and going again.

Tags: HP Desktops

Similar Questions

  • Problem with upgrade RAM of DC7700

    Good morning guys, I have a problem with my HP DC7700... I need to improve the RAM and I bought a stick of 1 GB RAM... When I put it on the motherboard to the start with the power button, do not start BIOS! She do 5 beeps, what I have to do for this update?

    The bios is upgraded to the version v 01.16 786E1 ultimate... Thank you again!

    Like these memory modules are guaranteed to be compatiblewith the motherboard of your computer desktop and also max out your RAM to 4 GB.

    You did not indicate whether or not you mixed memory sizes, brands or capacities when you upgraded. What are the reasons for copmmon an upgrade attempt will fail.

  • TouchSmart 610: TouchSmart 610 lights. I have a set of 5 beeps with a yellow light above the power button.

    I keep my office earlier this morning with the entry of the normal shutdown process. When I went to reactivate tonight all I get is a set of 5 beep with a yellow light flashing above the power switch. Repeat this five times then beeps stop and only yellow continuous flashing. I can hear and feel the hard drive running. I tried to unplug the power supply and then plugging, but the same thing happens. If I push and hold the power button on, it sounds like the hard drive stops and restarts. The normal blue light comes on for a few seconds then turns off and is replaced by the yellow flashing light. All you have no idea as to what may be the issue?

    Hello:

    Normally 5 beeps means there is a problem with the memory.

    I suggest that you remove and reinstall the memory modules and blow up if this doesn't fix the problem, if your PC has two memory modules, an and see if the beep disappears.

    If this is the case, remove this module and specify the first condition in you removed and if the beep begins once again find the defective memory chip.

    If it is not, remove the module and put the other in you deleted and if the ringing stops, you have found the faulty memory chip.

    Then replace the faulty memory module by one with the same specifications.

    If the ringing continues despite trying these steps, and then either the two chips of memory are bad (unlikely), or the motherboard has a problem.

  • Failed to get the results of a report from beep with a SQL with like ' %: Parameter.

    Hello

    I am trying to create a beep with sql like query report below:

    Example:

    Select usr_key from usr where usr_login like ' %: Parameter.

    In above query parameter before the user.

    The above query returns not all the results in the report.

    If I hard top query below it returns the result-code:

    Select usr_key from usr where usr_login like '% Test % '.

    Please let me how can know we use % with a parameter in the NOSE?

    Thank you

    Hi I had the solution how to do this at RANDOM.

    CONCAT function should be used for the same

  • Why it beep with a few key combos?

    Hi, I have a T60 thinkpad with windows xp professional.

    There is this really annoying feature with my lenovo: whenever I press "shift + F + T" together, my laptop beeps (beep system) which is really annoying, especially when you're on a library. I work with fast fourier transformations (FFT), so you can see why it's irritating.

    Anyone know why this happens and how I can remove it?

    Thank you for your help

    Pedro

    Panel > system > Hardware tab > Device Manager > view - hidden features

    not plug-and-play > beep. change to disabled

    I think so. I have not changed in some time.

  • I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

    I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

    In addition, the Console has opened with the same message several times, but I don't know what that means.

    Any help would be appreciated.

    Hello

    The last is a picture of the Terminal window.

    Just because it lists 'Console' does not mean that it has nothing to do with this application.

    You have not said why or what you're trying to install so I can't help with that.

    You can use the activity monitor to leave their.

    After you select an item, use the X in a type of stop sign icon and confirm force quit.

    21:36 Thursday; September 15, 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

    I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

    My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

  • Problems with Firefox 16, no homepage illustrated when starting firefox, bookmarks not shown, slow loading, missing address, without returning during navigation

    I installed firefox on my laptop 16, before that I had version 15 and everything was fine. After insalling the update, some problems came.
    first of all, there is no home page illustrated when I run firefox, although I took in the options

    Second, my bookmarks bar does not appear, I have to disable and enable the toolbar bookmark my wishlist, which is due to every time I close firefox and open it again

    Thirdly, it seems to me that pages load more slowly, each new page needed a few seconds to appear, using 15 version page loading was much faster

    Fourth, it never appears the address of the Web page I'll, he always just says "go to a Web site" is much more difficult to find the address of the site

    Fifthly, when I move from one page to another, I cannot go back but look for the site, for example when I have something to search on google and choose a page to look at, to return to my search results, I have to search again

    I hope that there are solutions for my problems

    Rather than suggest that you reset with 16 of Firefox that wasn't perhaps you could try portable Firefox and use Firefox 16 in this way. Check if it works ok for you. (Portable Firefox installs easily as an additional browser without making a mess of all the other Firefox settings or bookmarks).

    I could provide you with an address to download firefox 15 but is probably not better than temporarily using 3.6 Firfeox

    • See install an older version of Firefox (which provides links, he also mentions the ResetFirefox, but I personally would avoid using the reset Firefox feature, unless you have no extensions and no procedure of customization/customizations)

    If Firefox portable 16 work maybe we might consider then get a standard installation of 16 Firefox works fine.

  • my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

    my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

    My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

  • Problem with upgrade RAM on iMac 21 ", mid-2011

    Hello

    my iMac has 4 RAM slots. Already built in which 2x2gb. I have it decorated 2 x 4 GB.

    After a while, I met a problem, a strange tone while booting, RAM failure signalling. I removed a RAM 2 GB module, my iMac worked well for overall with 10 GB of RAM, but more slowly. I bought another 2x4gb and wanted to improve the memory. Once the odd tone.

    What really surprised me, that even I have exchanged only the remaining 2 GB module with a module of 4GB, even leading to the Strange tone (of course also two openings with 4 GB respectively). 2 former GB slots do not work with 4 GB of RAM modules, even if the capacity of the iMac is 16 GB.

    I tried the Apple, no where to found error hardware test. I was carefully choosing compatible right modules RAM (Corsair DDR3, 1 333 Mhz).

    What's wrong with my iMac?

    Kind regards

    Bobby

    What brand is the third party of ram?

  • Satellite Pro A200 - cannot start with new RAM

    I have two of these laptops, both purchased at the same time.
    I upgraded to 320 GB hard drive and tried to move the RAM to 4 GB as the spec States can be made.

    I used the recommended type of RAM, but the computer does not start with two RAM modules inserted. If I remove one of them, the laptop boots! I thought that I update the BIOS but found the only version available on the download web site is the same as I.

    Does anyone have an idea what could be wrong?

    What RAM you bought? I think that the modules are not compatible or your chipset does not support the 4 GB.
    Check it with CPU - Z!

    You could test the RAM with Memtest86 ([www.memtest86.com]).

    I doubt that a BIOS update will solve the problem. A more recent BIOS does not change the decision-making ability and/or supported RAM.

  • a macbook pro with retina display becomes hot when in use?

    A macbook pro with retina display becomes hot when in use?

    Yes.  All of the skin of the MBP is part of the evacuation of heat, not only the arriere-charniere event.  That's why running the MBP on a hard flat surface is better, so the room air can cool down all surfaces.  He put on a hidden or your knees when running may block exposure to air.

    High intensity running video uses graphics and CPU harder, needing cooling.

  • The App Store icon (which came with my iPad) is completely absent from my iPad (but not my iPhone). How can I get that back?  I've already turned the camera market.

    The App Store icon (which came with my iPad) is completely absent from my iPad (but not my iPhone). How can I get that back?  I've already turned the camera market.

    Check yourself, if you have hidden it by setting parameters > General > Restrictions > Apps install 'off' - If you have, then again ' "should get the app to reappear

  • I want to buy a cell phone with IMEI No. Without Bill? How to check s not robbed?

    I want to buy a cell phone with IMEI No. Without Bill? How to check s not robbed?

    There is no universal database of stolen iPhones.

    You can check if the iPhone is locked here activation:

    https://www.iCloud.com/activationlock/

    Buy your iPhone directly from Apple or an authorized

    iPhone dealer to avoid problems.

    If there is something about this proposed agreement that makes you

    uncomfortable, walk away.

  • recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    Hi mikedav,

    Thank you for using the Microsoft Windows Vista Forums.

    Method 1:

    Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

    Method 1:

    Follow the instructions in the link below which will help you solve the problem.

    Tips for solving problems with Internet Explorer

    http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

    Method 2:

    Follow the instructions in the link below to optimize Internet Explorer.

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

Maybe you are looking for

  • Alternatives of normalization of volume to iVolume and SoundCheck

    Several years ago, I found there is not enough volume of SoundCheck standards capability when you play a large number of titles through the lists of reading, or simply hanging out 'all '.  I have about 7000 titles of my iTunes library, more of which

  • Replacement battery for Satellite pro A120

    I need to replace the battery on my Satellite pro A120 and cannot work from the PC, the user manual or this site what types of batteries are compatible with this PC. Can anyone help?

  • Win 7 Product key

    I installed an SSD, try to install win 10. Wonder installation product key. I bought this HP desktop computer and there is no product anywhere key on the device. I have the software for recovery/installation of the professional application of win 7 o

  • issue by creating roles according to the jazn-data

    jdev 11.1.1.7In my application, I create roles in the jazn data files. When I run the application, the roles defined in the jazn file are not automatically created in the integrated weblogic.Considering that I have different applications in the same

  • VMware Vcenter converter

    HelloI installed the software Vcenter converter in German on a computer Windows 7 Pro (64 bit) with 8 GB of RAM and a lot of disk space.I would like to convert an existing server to Linux (Ubuntu Server 12.04, near the production environment) in a vi