HP Design Jet 520 blue with code screen
Turned on the printer and the blue screen with the code 805DFE31 on tried unplug power many time always comes back.
What should I do?
Hello
Try to isolate the printer, remove another outlet, cable connectivity, print head, ink, and then the printer.
If you still have problem, please replace the encrypted hand APC Kit (P/N: CQ891-67019)
PartSurfer: http://partsurfer.hp.com/Search.aspx?SearchText=CQ891-67019
It is my understanding that the new hand APC should come with the USB with the FW. Make sure it's there before to install the new main PCA.
If problems with the FW, will not recommend you to use old USB with the firmware again.
Thank you
Rashed
I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.
If your problem is resolved please click the button "accept as a Solution.
If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.
Tags: HP Printers
Similar Questions
-
HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)
Hello
Please do not type in capital letters because it's difficult to read and considered to be shouting.
---------------------------------------------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E which is also 0x1000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Hello
I use VMware server 2.0 (build 122589) on Windows VISTA 32 bit. The guest operating system is Windows XP SP3.
When I connect an iPod Touch on the guest computer, after a few seconds, there is any time a blue screen Windows with code BUGCODE_USB_DRIVER. I have connected 2 different digital cameras and the crash does not add.
Technical information:
STOP: 0X000000FE (0X00000005, 0X8228F0E0, 0 X 80867112, 0X822FFF70)
Does someone have an idea?
Thank you
Stop the prompt then proceed as directed by the attached screenshot with the VM highlighted in the left pane.
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
While idle and when printing, display screen becomes blue with 0xb900103d messages
Printer is HP PSC 2355 (ink jet)
Windows 7
Moved Office HP laptop Toshshiba
Problem: While idle and when printing, the screen turns blue with one or two 0xb900103d or 0x8823cd1e messages. Restart the printer corrrects the problem, but he finds himself in anywhere from 2 to 12 pages.
Thanks for your help!
There is a document using address type codes 0 x in the PSC 2355. This document can be found here.
If this error appears when printing and idling, then I would say that this is probably an internal hardware issue with this printer.
I hope this helps.
-
Remember - this
Only, I get a screen blue with the Dell logo on it and no office mouse pointer or even.
is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Check with Dell to see if there is a disc of diagnosis of material that you can download or order for your computer to test and see why it is not booting. Also check the LEDs on the front that can display a code error, or for a series of beeps which may indicate an error code.
"Arlingtonal" wrote in the new message: * e-mail address is removed from the privacy... *
* Remember - this *.
I get a screen blue with the Dell logo on it and no office or even the mouse pointer.*
is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
* You have problems with programs
* Error messages
* These recent changes made to your computer
* What have you tried to solve the problem -
HP Design Jet T920/T2500 Pages can be printed with the new HP 727 130 ml.
Hi guys,.
I want to ask you how many Pages can be printed in the new HP 727 130 Ml of INK CARTRIDGES. Normal, black and white printing on Hp Design Jet T920/T2500. One of my customers asking me this way, I'm looking for and read about the manual but this is not to mention the approximate number. pages can be printed. I appreciate who can help me and share their experience with this concern.
He mentions on the manual which:
Can be printed 120 Page A1 and A0 60 per hour, but HP 727 130 ml (returns/Pages)?
Thank you and advance...
I doubt that there is no information for this because inkjet printers work differently then laser where they use a percentage of coverage for compiles the approximate pages toner. With Designjet printers there are many variables outside coverage that would be very difficult calculations. You will be dealing with page sizes and even with normal printing or graphic images line densities will have much to different amounts of ink laid according to the original plot, type of paper used, etc.
-
Black screen with a blue glow on screen 55 "
I'm having a problem with the 55 '' LCD Cisco monitors where they randomly have a black screen with a blue glow at the bottom (hanging vertically). Their power off, then bring him back the photo. The DMP continues to play their content, and they are not connected by RS232, so I don't know that it is not orders this way. We have two side by side, and it is never both at the same time. It is one or the other, and they seem to alternate. Last week from the other two, who are in another building and in separate rooms in one room on the other hand, started having this problem also, but they have been in service for a few months more. Last week, it was one, which is just in front of the person to me, and this morning it was the other. The oldest of them is just less than a year in the service.
Any suggestions?
Hi Michael,
I know a couple of back issues of customer with 55 '' screens goes black after a while. Best option is that you open a service request in the TAC of revision of the exact firmware running on LCD screens and see if they match a known problem that can be corrected - since I do not believe that there is a patch available in general release.
Best regards
Marco
-
I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?
Please try the steps mentioned in the Adobe Photoshop Lightroom help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom
You can check 6 Lightroom displays a blank blue screen with an X through it in the module development for all the photos of my reference.
-
Why open the cover on my iPad Air is more directly shows the PIN code screen
Hello
After installing iOS 10, when I opened my iPad original air cover (with magnet) I suddenly need to do something extra to access the unlock PIN code screen. I used to be able to enter my PIN to unlock immediately.
It's really annoying, that I almost never use the home button on my iPad, simply open the lid is allowed to enter the PIN to unlock and start to use the iPad. Now, I have to first press the home button, it means an additional gesture.
Y at - it an option to go back to the old behavior again? I really don't like it.
Kind regards
Iskander
Hello
Some things have moved go in display & its right brightness settings
The screen lock / unlock.
See you soon
Brian
-
Satellite P300-150 - blue lines on screen
A question on my blue screen but as a non geek computer havn't a clue how to describe. Here goes.
The normal white screen of my computer began to appear with the shifting of the blue lines through it. However when I push my computer screen laptop back to my lap screen is stabilizing and is normal.
Hello
This means that if you have the screen, the image will not display correctly? Is this good?
And what you mean exactly with white screen exactly?Right now it sounds like that the LCD cable has a loose fitting and should be replaced. Therefore, you can contact a service provider allowed in your country to replace this part.
-
printing for design jet 430 cable
DESIGN JET 430 (BLACK, NO COLOR PRINTING) ALLOWS YOU TO PRINT WITH A PRINTER ADAPTER USB FROM THE PARALLEL CABLE?
I SEE ON AMAZON DIFFERENT SOLUTIONS:
(1) USB 2.0 - IEEE 25 POLES DB25 PARALLEL ADAPTER
(2) USB 2.0 - PARALLEL IEEE 1284 36 LPT ADAPTER PIN DB36
What is the current connecvity to the device & what operating system. The current setup works well?
The adapter cables may or may not work, you may need to take a risk if you think it is better to buy.
-
Hello, this is my first time posting here, because I'm in desperate mode! I have a HP Pavilion Slimline s5304y using Windows 7, desktop pc that I bought in February 2010.
After getting a virus on my computer, I ordered system of HP recovery disks, and made to factory settings recovery process (twice!), however, during the Windows install process, it never cross the blue HP Invent screen that says:
-Do not turn off your PC during this unique installation process
-Your PC will restart several times during the installation process
-Messages may appear on your screen. Ignore these messages until you are prompted to restart or shut down your PC
To the bottom of the screen, it keeps saying "Please wait...". "with a green scroll bar. What I see is the buttom to start at the bottom left corner but I am not able to access anything whatsoever and I never get my desktop screen or the desktop icons. I restarted and closed several times, and as soon as I log on windows, I just get the same blue screen.
The 2nd time I did the recovery process, I let him continue overnight (just in case I was not waiting long enough) and my computer never stop as it was supposed to when the installation is complete. In addition, the whole process, I looked the first time around and my computer never restarted as he said he was supposed to; It seems to just be stuck for the rest of the installation procedure for windows. There finally comes to switch to "standby" mode.
I have nothing plugged on the other except the power cord, monitor, and keyboard/mouse. I have not installed new hardware since I bought the computer.
I did a test of diagnosis and everything going on.
I tried to get help from HP Support, but because I am out of the warranty period, they cannot help me and want to charge me $99!
I don't know what else to do at this point. Can someone please?
Thank you.
Hello
Assuming that maybe that's a problem with the recovery discs, it is a simple work-around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your PC comes with Windows 7 Home Premium 64-bit, it comes to the exact retail version that you would need.
If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD. These Images are clean and a well respected source, however there are only limited versions available.
Use the disk to perform the installation, enter the activation key of Windows on the sticker COST on your PC on demand, and when the installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx
Additional drivers, you may need can be found here.
Kind regards
DP - K
-
Avoiding IllegalStateException with inactive screens
I tried to avoid the IllegalStateExceptions... like a n00b I get them pretty often. I realized doing something on the screen the user jumped (bad, bad!) often gives an illegal state. I tried to write a method to detect if the screen is higher up in the stack, so I check first before doing anything on the screen, so if I do anything in a thread and have to come back later, I check if the screen is active, first.
{} public boolean isActive()
return UiApplication.getUiApplication () .getActiveScreen () is this;
}I realized a few questions/issues with this approach.
- If the user has the menu open... This code considers that the screen be IN-active, so my code won't do anything while the menu is open
- I'd get an illegal state if I try to touch the screen below the menu when the user has a menu open? If Yes, this means I would have if sit and wait until the screen activates before I run the code after that I'll be back on the wire?
- Would I be better to copy the invokeLater, runnables tail model, and then run then when screen is active? As in, the implementation of ScreenUiEngineAttachedListener and then try something like this below...
protected void invokeWhenActive (Runnable r) {}
store the executable
}
public void onScreenUiEngineAttached (attached screen, boolean) {}
{if (attached)}
check if we have pending runnables...
UiApplication.getUiApplication () .invokeLater (runnable);
}
}
What best practices can I keep in the spirit of updating the screens? To give a concrete example. Users select a category of points of interest (for example, police station, hospital) of a screen then I press the display of the result list that begins with the display of a loading animation. Then it will update when I get the info.
IllegalStateException may actually occur for various reasons. But that being said, I'm not aware of any that are the result of a screen is not not the active screen. So I suspect your presumption that it is the cause is not correct, I think that there is something else that goes along with the screen being burst that creates your problem.
I usually print the exception (
. toString()) to know exactly why I got it. You will find examples of this kind of thing (a) you can get this by setting the focus on a field that is not actually on the screen - I think that the message will say something about "not apparent" or "not on the screen" (note that you can set the Focus on a field for a screen that is NOT on the top of the stack)
(b) adding a field to a Manager when the field is already added to a Manager, I think the message will say "already apparent.
So unless you print the detailed message, you will not be able to solve your problem.
Regard to deliver you from editing screen, don't forget not that when you update a screen, you must have the lock on the event - that's all just a lock that makes sure that only one thing is updating the user interface at the same time. Now all the event handlers (menu key, etc.) running on the event Thread, which means that they all have the lock. You can take advantage of that too. You can plan a Runnable t run on the thread of events, when he has the lock on the event. To do this, use this "incantation":
(UiApplication.getUiApplication), invokeLater (new Runnable() {}
public void run() {}
your UI code update
}
});
Thus, you should use this kind of process when you get the information you want. Then push the ' loading screen, start your thread to download, have the wire download use this incantation to display the loading screen, and update the user interface.
Hope that answers the following questions:
See more here:
http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865
-
Problem with switching screens
Hello, I have a problem with switching screens. Here is my code (both screens extends screen):
SerializableAttribute public class Main extends UiApplication {}
Private TrainLinkScreen trainLinkScreen;
Private WorkingScreen workingScreen;
private string;Public Shared Sub main (String [] args) {}
new hand (.enterEventDispatcher ());
}public Main() {}
workingScreen = new WorkingScreen();
pushScreen (workingScreen);try {}
trainLinkScreen = new TrainLinkScreen();
} catch (GpsException ex) {}
message = ex.getMessage ();
} catch (FileException ex) {}
message = ex.getMessage ();
}
If (message! = null &! message.equals("")) {}
invokeLater (new Runnable() {}public void run() {}
Dialog.Alert (message);
System.Exit (1);
}
});
} else {}
popScreen (workingScreen);
pushScreen (trainLinkScreen);
}
}
}The problem is that the workingScreen is not displayed. The download takes a little time, so I wanted to put here a screen like "I work, please wait...". ", but he appears, the unit freezes for a few seconds and then the trainLinkScreen appears. Could someone please write where is the problem? I tried invokeLater on the first screen, but it ends with the crash on popScreen (trainLinkScreen). I tried invokeLater on trycatch also block, but it does not work either. Help, please.
Thank you. I already have the solution (I hope that ), I put to device gps location in a separate method (it's a small part of the code that does not have too much time to finish), she called before initialization and initialization in method invokeLater as a thread (the large part, too download from the internet). The display works perfectly in this way (in the first place, the "Download" screen appears and then comes the rest of the code) Although some other things seems to not work properly now
-
Get a blue and green screen on windows 8
I get a green or blue screen whenever I try to open a program, I bought the laptop 8 weeks ago, it gets frustrating because I can't do at all I can't even reboot I get a green screen
Hi Kim,
Thanks for posting the query on Microsoft Community.
I'm sorry to know that you have found a mistake on blue or green screen. Don't worry, will help you with the question.
1. What is the brand and model of the computer?
2. don't you make changes before this problem?
3. What is the full error you receive?
It might be because of corrupt or missing system files.
Let us try the steps in the link below and check if it helps.
Resolution error blue screen in Windows:
http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors
Warning of Chkdsk.
Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.
Maybe you are looking for
-
How to check the compatibility of graphics cards from my computer
The name of my computer model is HP Pavilion Elite HPE motherborad: bk170aa-aba hpe-210y Processor: AMD Athlon (TM) II X 4 945 processor, 3000 Mhz, 4 logical processor core Graphics card: ATI RAdeon HD 5450 I bought this desktop computer for 5 years
-
Want to 700-074: dual band Compatible WiFi card want to model #H5Q09AA 700-074
Eager to upgrade my desire 700-074 single band 2.4 Ghz 1 x 1 technology for a dual band wireless card use 5.0 Ghz internet. Currently, the machine has a Ralink RT3290 802.11 bgn adapter Wi - Fi installed initially with the machine The processor is In
-
Hello everyone I am new to this forum and new to a y500. So I recently had the y500 it has been refurbished, but it works great execpt for a problem. When I play a game for a little while the sound mess up. It's a static sounds like when your on a te
-
Hi all I have a problem with SV TDMS waveform VI read. I have several files from a (channel 0 hammer, N response chains) impact test where I gained 15 hits (4500 samples piecemeal, 67500 samples in each channel). My idea is to read in blocks of 4500
-
Pavilion DV5-1110em: Base System Devices on Pavilion DV5-1110em Windows 8.1
I just upgraded laptop to my Windows 8.1 father he had bought after finally abandoning with Vista. While I realize that it is not an option for support on the HP site, it installs and runs almost perfectly. However, in the Device Manager there are th