HP designjet 4500 36 "scan: scan HP designjet 4500

I wish this scanner with usb with win 10 connection to ise, or win 7 but ı can not find a driver for scanner. It was made contex co for the hp md67m model No.... Number of Q1277a of hp... (Pc scanner does not work so I bought the new pc to scan...) I then need driver)

Thanks for your interest. I try to use the software context but ı couldnot find dg67m maintarance driver file... So when ı use usb com 'unknown device' soft contex pc "there is no scanner find" "then?

I even look at scan time on contex... G600 series like 4500. I have ıse this scanner softvare. If you know any model on contex-same with dg67m please write... Thank you...

Tags: HP Printers

Similar Questions

  • HP Designjet T2500: How can I scan documents without using the main table with the HP Designjet T2500 printer?

    Hello, in my office we recently bought printer HP Designjet T2500 and, so far, works great but I have a doubt with the procedure of the Analyzer in the case where the main panel is malfunctioning. How can I scan a document without the help of the main panel or a plan?

    I know the printing can be done with the supplied software, but he made no reference to the case where we need to scan a document.

    Any help will be great, thank you.

    Hello

    Analysis cannot be done froom the front panel of the printer.

    If you have a problem with the Panel, you will need to repair the device because you won't be only able to scan, as you will not be able to load paper or calibrations.

  • Designjet 1120PS: Riddle of Scan axis 1120PS DJ

    Our plotter 1120PS recently started throwing up the error code 86.01 "Possible paper jam". We discovered that the belt tensioner broke and the belt streached out, so we replaced the belt and tensioner. However, the printer still does not work.

    Initializing the printer, it always throws the same error code 86.01 "Possible paper jam".

    When you run the Scan-axis test in the diagnostic menu, I get different error codes partially because I can't tell what are the right answers. (BTW, where is the DIRECTED transport offer? "I don't know where to look and the maintenance manual is not useful).  The test asks if the cart moved to position average; that directly centered on the printer or anywhere in the Center where actual printing occurs. the transport never stops at the Center, so if I select 'No', I get the error of "High Friction. But if I select 'Yes', the test moves very well to the length of Scan-axis where it errors with "87.11 Scan-axis length too short".

    I checked there is absolutely no pieces of paper where they do not belong (multimedia way, gas station, print heads, transport stem clear all)

    I cleaned up the coding Strip, and the portion of the analysis of test of axis encoder will never cause an error.

    I checked the electrical connections

    and now I'm out of ideas. What else can I try to get the printer working again?

    Strawberry was interfering with the path of transport for the journey. He was not sitting in the correct Groove, which actually hold about a quarter of an inch too far, shortening the length of scan axis just enough for the error. now all these errors 86,01 alla

    of course, now the ink levels are too weak in cartridges that I have to replace to get through calibrations. so I still can not print them again, but I hope that it will not open a new Pandora's box.

  • DESIGNJET HD SCAN CQ654B: CQ654B

    Hello

    I have 3 messages showing:

    -The scanner lamp needs to be replaced

    -The scanner air filters needs to be replaced

    -Maintenance kit required #1. Pleace contact HP to order the kit.

    Could you let me know the numbers part that I would need to order?

    See you soon

    Hello

    This is the number of piece Q1277-60013 FLUORESCENTS

    The Internet should come with the lamp.

  • HP Officejet 4500 G510n Scan via airport utility?

    How can I get my HP Officejet 4500 G510n to perform a SCAN using airport utility?

    Airport utility is not related to operating an MFP. It there is no scan via airport utility function or any what router airport. That is, the printer must be connected through its network and NO USB connection to the router. What is the Airport base station is the printer is simply a network client. No printer function any is active via the airport.

    You must install the drivers HP and the complete software for any OS that you are running on your computer.

    http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/mod ele/3986394/document/c0...

    It's the HP drivers and software that will allow you to scan over network. Or if NOT, maybe... often scanning on network is problematic.

  • Scanning on HP Officejet 4500 G510n-z problems

    I have a HP Officejet 4500 G510n-z. I am currently on wireless and able to print without problem. However, when I try to scan, the display shows "NO Scan option. Refer to the documentation for the device to get out of trouble. Documentation of currency is not on the analysis of the questions and when I use the help function in the printer it tells me that there is "no computer connection. I have all set up and work wireless. Help, please! Thank you!

    Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

    If this isn't the case, you may need to reinstall the complete star driver.  What is your operating system?

  • EPrinter HP Envy 4500 Scan of the computer (HP Pavilion 14 Chromebook) / E-Mail?

    I just bought three HP Pavilion 14 Chromebook & HP Envy 4500 ePrinters for members of the family that I am trying to set up.  (I'm new to cloud computing).  Can I scan documents to PDF at the computer (Chromebook) / E-mail of the printer?  If so, how?  When documents arrive on the computer?  If the scan to e-mail is possible on the devices above, can I store several addresses e-mail ePrint in the printer choose?  Thank you!

    Hi eKeith,

    Thanks for shouting it and fast response.    No problem on other issues, it is we are here for.

    1. You will need to manually launch the built-in Web server.  What I've done in the past, it's just mark the ip address of the printer is to click instead of having to manually enter the IP every time. It works best if you set a manual ip address of the printer.  I've included a screenshot.
      1. Click on the "Network" tab in the SAP
      2. Click on 'Network' in the left side menu
      3. Click on 'network address (IP)' in the left side menu
      4. Click 'propose a manual IP address.
      5. Click on "Manual DNS server"
      6. For the server DNS preferred manual please enter 8.8.8.8
      7. For the auxiliary DNS Server Manual please enter 8.8.4.4

    2. There is no way to web analytics by default in pdf format.
    3. The default value corresponds to your "Downloads" folder, but you can switch to "Google Drive".
    4. If you click on the built-in web server Web Services tab, there is an option in the side menu on the left for updates. I've included a screenshot of where to find him.

  • ENVY 4500: Lack of scanning for HP ENVY 4500 software after reinstalling the laptop

    Dear support,

    I got a HP ENVY 4500, installed on a laptop with Windows 8.1 and the HP Software scanner worked fine.

    I have recently reinstalled the same laptop but with Windows 10 Pro: the printer works fine but the scanner software HP is not available! I can't use all the features of the printer this way...

    My question is: why the HP scanning software is not available for Windows 10 Pro? I used the original CD.

    Where can I download the (new) 10 Pro software for Windows?

    Please help me solve this problem.

    Kind regards

    Carmine

    Hi all

    now, I have solved my problem: I install the Windows 10 soft "HP Scan and capture" from the Microsoft Store and it works very well with HP ENVY 4500 printer / scanner!

    Concerning

    Carmine

  • Why my HP Officejet 4500 says "no scan option?

    Why my HP Officejet 4500 says "no scan option? It allows to analyze PDFs til yesterday.  Does not help to solve the problems.

    Hey LukesP,

    I understand that you get no scan option on your HP Officejet 4500.

    If you follow this link, download and install printing HP and doctor Scan. It will solve your problem.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & JumpID = ex_r4155/HHO/IPG/ccdoc/printer_diag / & softwareitem = MP-123407-2

    I hope this helps.

    Thank you

  • Want 4500: scan and copy has stopped working

    OpenD scanner and cannot complete the overview "scanner is busy.

    More pilots to day and smart scan installed. Still no scanner-printer or computer.

    And now, there are also * nothing * when I press print black or color.

    Hello

    Follow these steps to fix a scanner failure, as you describe:

    http://support.HP.com/in-en/document/c00587971

    If the problem persists, you can check the applicable support options by completing the form below

    Note: Be sure to change the country to your correct location

    https://support.HP.com/us-en/contact-HP/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876

    Kind regards

    Shlomi

  • Connection to my laptop designjet 4500 ch - help

    I have fixed a broken designjet 4500 ps that was given to me by the replacement of the motherboard.  The printer initializes and starts without any problem.  Everything seems fine with the printer.  Now I need help plug into my laptop.

    I have a laptop with USB port and a port Ethernet 10 Windows running.

    I installed the drivers on the laptop from the HP site. Windows 64 bits 8.1 was the last OS I could choose, but the HP website refers to this facility when he talks about the compatibility of Windows 10.

    The motherboard, I have installed has two USB ports. I ran the installation of the driver and could not recognize the printer via a direct USB connection.   There are not even the Windows ringing sound that indicates the USB connection.  The Device Manager shows nothing under USB or COM ports when the cable is connected.

    It seems to me the manuals that I downloaded that is the only way to directly connect to this printer by Firewire or USB.  To be honest I really don't even know what firewire is, and am pretty sure that I have no such port on my laptop.

    I tried to directly connect an ethernet cable from the printer to my laptop but, as expected, nothing happened.

    When I got to the printer, he had a card "Intel PRO/1000 GT Desktop Adapter" with an ethernet port is in the field of electronics.  The main trainer PCA Council has an available for this PCI slot, but I was afraid to install it without knowing whether or not it was actually (I did not find in the service manual).  If I installed this card, would I be able to connect to the printer over an Ethernet cable directly from my laptop?

    For what it's worth, the printer LCD screen has a menu of installation with "e/s Configuration.

    I have the following options:

    Select the timeout of e/s (Set at 30 seconds)

    Select IP Interfact (set to pop-up with the options unchecked for Fast Ethernet and Firewire 1394)

    Fast Ethernet:

    / Information (installed: Yes, active IP: Yes, printing enabled: Yes)

    / Configuration (link state: down, IP address: not configured, try: DHCP)

    Gigabit Ethernet:

    / Display information (installed: No.)

    1394 Firewire:

    / Display information (Installed: Yes, active IP: no, printing enabled: Yes)

    USB:

    / Display information (installed: No.)

    Jet Direct:

    / Display information (installed: No.)

    Currently, I am trying to dive into manuals and to familiarize myself with them.  Anyone has any advice on getting it connected to my laptop?

    Thank you

    Very well.  I was able to resolve myself.  I got out an old router I had and he was able to establish a connection via Ethernet without any problem.

  • Want 4500: jpeg scan breaks into separate files

    When I scan from my desire to 4500 in jpeg mode, it breaks a sweep in separate files. How do I get it to scan a document in a file? I don't have this problem when scanning to PDF files. Thank you.

    Hello

    Thank you for using the forum.

    These relevant videos explain whee you a bad shot.

    Scanning multiple photos:

    HP Officejet Pro 8630

    https://goo.GL/ADYDmo

    HP Deskjet 2540 scanning tips

    https://goo.GL/qfQyf4

    Hope that helps.

  • DesignJet 4500: HP DesignJet 4500 driver ver.7.10.0.0 - unreadable symbols in the printer options window

    Hello, I have a problem with HP DesignJet 4500.

    With the new driver ver.7.10.0.0 (the most recent in the HP support page), when I get to the printer options - all symbols are unreadable (screenshot 1).

    Old print server - I found already installed ver.6.17.0.0 driver 32-bit and 64-bit driver ver.7.10.0.0 (screenshot 2). When installing 6.17.0.0 driver for 32-bit PC and open the window-it works very well, all the symbols are in English (screenshot 3).

    So, how do I make the symbols in 7.10.0.0 readable? Or, if I can't fix it, where I can download 6.17.0.0 driver (64-bit)?

    Thank you.

    P.S. It's unreadable that symbol in the windows printing options, but 7.10.0.0 prints correctly.

    Screenshot 1:

    Screenshot 2:

    Screenshot 3:

    Hello

    Remove the driver completely from the computer (devices and printers, properties of the server), download the driver from the HP website and install it.

    If you still have the problem, you may need to remove the printer from the registry.

    Best regards

    Mike G

  • HP ENVY 4500: Scan the form of the printer for computer

    Attempt to analysis of a document from HP ENVY 4500 to my Dell computer.  Says that I have to synchronize but do not know how...

    Hello

    Have you installed the software and drivers on your computer again. If so, please try

    Double-click the icon of the printer on the desktop,
    Select manage the Scan of the computer
    Click Enable-

    You can start automatically with Windows, BUT you will get an arror message if you turn on the computer FRONT of the printer.

    Kind regards.

  • HP Envy 4500 - Scan does not, most periodic freezing

    Hello

    I'm having a ton of problems with my HP Envy 4500. I will first start by scanning. First to get the "No found computer" message when you try to scan (I can print fine however). I tried HP Print & Scan doctor, he said I was not fully installed the driver. So I download the file ~ 100 MB, then it passes through basic facilities, then allows you to "Connect to printer", I'm wireless and enter the IP address (which is connected and Excellent report) and about 10 seconds later, he says: "cannot find the printer. My only options are the search, the installation program and cancel. Therefore, I can never get to install and he sends me in a loop. I also file & Printer sharing turned on with Windows 8.1, with the automatic configuration of network devices.

    Since the end of the printer, I've tried manual and automatic IP and also directly connect without a bit of luck. In addition to these frustrations adds the printer freeze about every 10-15 minutes. I have to disconnect and reconnect the printer for it to work again because it is totally insensitive.

    Finally, my printer indicates an update is available, so I download a driver, but it ends with the OXB82EF9BA error code. All crashes again.

    I tried everything that I can for hours without success. Please notify.

    -Jesse

    Hello Jesse_B,

    Welcome to the HP Forums!

    I understand that you get some problems with your desire to 4500. I will do my best to help you! First of all, I need to know your operating system on the computer that is having these problems? Click here to read: Windows.

    Because you are having problems with the HP software, I'll give you a few steps to help:

    Please uninstall the software on your computer by following this document from HP about uninstalling the printer software. When it finished, I would like you to clean your Temp folder on your computer:

    1. click on the start menu, in search programs and files type % temp %

    2. press on Ctrl and together on your keyboard (this will highlight all)

    3. right click on your mouse and click on remove

    Now, perform a clean boot on your computer by following this Microsoft document here. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program.

    Secondly, I would like to you can use the Printer Wizard to install the full features software. This is the right software and you need to use a USB cord to perform this step. It will be much easier to find your wireless network. (It's only for the Windows operating system 7-8: 1).

    If you printer is still the gel, then make sure that the printer is connected to a live wall, not a surge protector. I want to see if that makes a difference. Also, try to reset the printer for more than 60 seconds. Leave the printer turned on > unplug the power cord at the back of the printer.

    You receive an error message "OX82EF9BA". This refers to an error in Windows Update. You must perform this update on your computer. Please post your results, I will be looking forward to hear from your part have a good night!

Maybe you are looking for

  • Bad birthday with siri in macOS Sierra

    When you use Siri one my Imac (with macOS Sierra) and ask for a birthday, the answer is always the day before, as it should. Ask anyone "xy" with a birthday in contacts in the 24. in June he replys 23. from June. I use the Sierra macOS German languag

  • can I use a server of wind at the top of a tower

    to speak with someone in another country mex in U S

  • How does routing for ideas?

    When an idea comes, how it is routed?

  • Retro-design of a model

    HelloI need to reverse engineer a PROD/table model that contains a huge amount of data.As far as I know, while reverse engineering for the first time, he'll try to pull all the data.I want to restrict these data based on condition. Is this possible?P

  • Vibrance plugin crashes AE CC 2014 systematically after update (Mac)

    Using AE 13.0.0.214 on a Mac Pro, Yosemite 10.10.1.Just updated AE CC 2014 and cannot load my projects without AE half crashing. Reduced to the Vibrance plugin (AE built in one, no video Copilot). In a new project, I create a solid, try applying Vibr