HP Designjet 500: Driver for Hp Designjet 500 42 invalid in Win 64
I downloaded the driver for mi hp designjet 500 42 (c7770b) printer in windows 7 Professional 64-bit (with all the software updates for today 02/20/2015). When I double click on the exe file you downloaded here: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=377948&lang=en&lang=en&cc=us&cc=us
I got the message "it is not an application valid win32" and it is impossible to install.
You have the same error for all drivers below?
If the same phenomenon occurs for both of the above drivers try, follow these steps, the steps for Windows 7 should be the same as those listed for Windows Vista in the article:
Hope that helps,
Tags: HP Printers
I upgraded from Windows 8 to 8.1 with Windows Update without problems or missing drivers.
Later, I bought and downloaded Windows Pro 8.1 and burned the BONES on a DVD. I have deleted all previous partitions and run the long version of the format of the hard drive. Then I managed to do a clean installation of Windows Pro 8.1. I had to reinstall drivers since the contents of the folder in C:\SWSetup saved from the previous operating system.
I was not able to find the missing driver for hardware ID:
ACPI\VEN_HPQ & DEV_0004
Thanks in advance for any assistance with a link/info for the driver!
Thank you for your time and your help. However, this link to sp63786 would not install. But your mention of HP 3D DriveGuard software installation was the key to me finding the right software/drivers.
As I mentioned in my request for help, I tried again in the C:/SWSetup folder saved before reformatting the C drive. I found the good HP 3D DriveGuard software in the subfolder "sp58423". This installed perfectly and eliminated the unknown device message seen in Device Manager. It is the solution. For anyone buying Professional 8.1 Windows to install on a computer with Windows 8 or 8.1 pre-installed, let me point out to save C:/SWSetup and all of its subfolders.
Thank you to put me on the right track to find my solution with HP 3D DriveGuard software!
M$ releaded victory 8.1. I checked http://www.dell.com/support/drivers/us/en/04/ServiceTag/ my_service tag , but I can't find driver for win 8.1
When @dell updated driver to win 8.1?
Responded to your other post but will be the solution here also:
Reference Dell have everything you need on their ftp site: http://ftp.dell.com/published/Pages/inspiron-14r-5420.html
8.1 Windows drivers
Intel Chipset Installation Utility (8.1): http://ftp.dell.com/FOLDER01716068M/2/Chipset_Intel_A00_Setup-MY5TP_ZPE.exe
Driver Intel Management Interface (8.1): http://ftp.dell.com/FOLDER01739456M/4/Chipset_Intel_W81_A01_Setup-CN7W1_ZPE.exe
(8.1) RealTek card reader: http://ftp.dell.com/FOLDER01749036M/1/Chipset_Driver_11YGT_WN_6.2.9200.39050_A00.EXE
Intel Rapid Storage Technology Driver (8.1): http://ftp.dell.com/FOLDER01716261M/4/SATA_Intel_W81_A00_Setup-NGJJW_ZPE.exe
Intel Turbo Boost Technology Monitor Application: http://ftp.dell.com/FOLDER00709449M/8/App_TBTMonitor_W78_A00_Setup-X3CV1_ZPE.exe
Intel HD 4000/2500 (8.1): http://ftp.dell.com/FOLDER01735700M/3/Video_Intel_W814_A00_Setup-C0KGD_ZPE.exe
NVidia Geforce (8.1): http://ftp.dell.com/FOLDER01715984M/5/Video_Nvidia_W814_A00_Setup_MNJGY_ZPE.exe
Conexant Audio Driver (8.1): http://ftp.dell.com/FOLDER01745515M/1/5460_Audio_Driver_GJC8Y_WN_18.104.22.168_A00.EXE
Intel 2230/6235 Wi - Fi + BT v4.0 + HS adapter (8.1) driver: http://ftp.dell.com/FOLDER01748763M/1/Network_Driver_119M4_WN_3.1.1307.360_A00.EXE
Dell Wireless 1703/1901 Wi - Fi + BT pilot (8.1): http://ftp.dell.com/FOLDER01745474M/1/5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE
Dell Wireless 1704 802.11b/g/n (2.4 GHz), BT 4.0 + HS Driver (8.1): http://ftp.dell.com/FOLDER01745500M/1/5460_Network_Driver_1DCRY_WN_22.214.171.124_A00.EXE
Quick adjustment (8.1): http://ftp.dell.com/FOLDER01749179M/1/Application_D4N3K_WN_11.1.45_A00.EXE
Try the version of HP 3D DriveGuard on the following link.
DP - K
Acer V5 573 anyone know the correct driver for an adapter Broadcom 802.11n wifi win 8.1. Driver in use is 126.96.36.199, but has limited connectivity with my dlink router.
This solution worked for me. Finally!
solution sugested by DrKnas
Re: 8.1 Windows broadcom wireless drivers
I have an Aspire E1-571 with Broadcom wifi with the same connectivity problem. I solved this by changing in the "coexistence of 20/40" and "WWW" driver settings to disable all other automatic or default settings. Thanks ACER supports no help.
Message 8 of 9 (936 views)
Original title: twain driver for Windows 8
After having upgraded Win 8, my scanner has failed. Once verified, the problem come from twain driver. Pls help
Fixed mine. There is no drivers Windows 8 available on the Canon's Internet site or Windows Update. Follow these steps to install a scanner CanoScan 8400F under Windows 8 x 64 in desktop mode:
(1) download and install the drivers Windows 7 x 64 on the Canon site.
(2) launch Manager devices, right click and uninstall any unknown device (?), then scan again for new hardware and drivers Windows 7 x 64 installs automatically.
(3) download and install the Canoscan Toolbox software from the Canon site.
(4) run the Canoscan Toolbox software, select settings and click on the reset button to fix the non-working electronic copy, scan, PDF, mail scanner buttons.
The button is restored after the restart. Everything works as expected today. Good luck!
HOW to GET Designjet 500 more DRIVER FOR Windows 10 Enterprise 64 - bit OS
Windows 10 is not released until July 29, pilots and what products will be supported probably won't be out until close. The HP page here says "compatibility tool soon, come back in the end of July."
That said, I use the old driver Windows XP x 64 on my decades old Designjet 650 c in Windows 10 preview. I think Windows 7 or 8/8.1 drivers work in Windows 10 for the Designjet 500 if there is not drivers provided. At this point there are sixteen variations of HP Designjet 500 models available through Windows Update, including variants of the 24 "and 42" models, standards, and only, HP and Microsoft provided drivers PS mono models and color and HPGL2 drivers.
I recently inherited a HP DesignJet 750 c more. Its still in great condition and I think that works. I bought a new cable for it this week and foolishly taken I'd be able to download a driver for it on the HP website. Due to the age of the machine, it seems to be more supported. Help someone! I need a driver for this product download or it is completely useless! And it's that it was not clear, I don't have the original CD. Help!
HP has really screwed the instructions on this one. You must search a directory 'win - x 64-hpgl2-drv' directory will be without quotes and on mine, it was located in the downloads directory. This directory will be inf file you need.
I'm working on Toshiba Quosmio X 500 (win7 64 bit) in a specialized program that is installed only on 32-bit systems.
I can't find video driver for the installed system 32-bit on the second drive of the laptop.
Please help me find.
At present, it seems that only 64-bit of Windows 7 driver is available.
As wrote Al - eX, you can use the Windows 7 compatibility mode. Here, you can run XP in a virtual machine (32 bit). ;)
I can download all the drivers for my pc (500-314), except a title sp66692. This is the driver for my eathernet card. I use my wireless right now, but I want to be hard wired ot my modem. Any ideas why it's the only one that will not download? It always take me to screen 'language '.
Where do you get sp66692 of? It should be the following:
More drivers for your computer:
I have a hp Designjet 230. I just bought a Dell Optiplex gx270s with XP PRO Service pack 3 in the hope of using this printer. Windows supposedly has the right driver, but when the new hardware found box is in place, the result is a step to go. I downloaded the driver xp Hp PL532en, pointing the installation in this folder ends with a message "unable to install". The search to the internet with the installation program does not work either. This printer has always worked on xp. What gives?
I'm sure that you read and followed all the instructions on the download page of hp (which curiously do not refer the wizard 'new hardware found'), but I suspect there's a bit more to this error message. Could you please provide it in its entirety?
Windows XP includes drivers for DesignJet 230: one for (D/A1) and the other for (E/A0).
What happens when you follow this sequence:
1. with printer and computer off, connect the printer to the computer (BTW, this printer connects using the parallel port - a connector 25-pin Centronics - OK?)
2. turn the printer on and stabilize
3. open computer and let stabilize. Cancel the new hardware found Wizard opens.
4. click on start > printers and faxes > add printer
5. in the Add Printer Wizard, select "Local printer attached to this computer" and uncheck "automatically detect and install my plug and play printer."
6. Select "Use the following port", then the correct port in the drop-down list (probably LPT1)
7. Select the correct driver for the HP DesignJet 230
8. finish the wizard.
I have a problem...
I downloaded 'ATK Hotkey Driver for SL300/400/500' to http://www-307.ibm.com/pc/support/site.w ss/WIN7 - BETA.html #atkh
but I can't install it,
I still see "Runtime error".
... "this application has requested the execution to terminate in an unusual way. For more information, contact the application support team"
Help me please...
Please help on DESIGNJET 120 DRIVER FOR WIN 7 32 BIT
There is no support for Windows 7 to the printer, Designjet 120
You can try the Vista drivers, but there is no guarantee that the printer does not work properly.
I need a driver for Windows 7 and a HP Designjet 430
I found the site of technical support drivers for 3 other models of HP printers
I don't find a driver for my printer HP DesignJet plotter 1050c on Windows 7. HP says they don't have one.
You may need to use the Vista version
There are two, you will have to choose one that fits your need
If the installation fails, you may need to use Compatibility Mode
right click on the Setup file, click Properties, choose the compatibility mode, choose Vista, press ok and the file is ready to be installed as if it were a vista machine help others, let us know what solves your problem. Click useful Vote for those who help.
Maybe you are looking for
Hello everyone. I ask for your help and sorry for my English. I tried to perform a new installation of Sierra -J' made a clone with the CCC to my Mac Book Pro (mid-2014) SSD for a backup external hard drive. Perfectly executed -Created the installati
Everytime I open applications like QuickTime and preview, the window open a file keeps popping up. How can I stop this from happening? Thank you in advance!
Hello I upgraded to win 8 for Win 7 and also added an SSD. Need me drivers for 5 devices including wireless networks. My model is E0K71UA #ABA Thank you
I want to install MS Money under Vista. Program downloads, installs, then stops. NTo ask Prouct Key and box contains. Cannot make it work after that. Box appears and announces that the programahas has stopped working. Need to work. Help, please.