HP DesignJet 500: HP DESIGNJET 500

General question... I am looking to buy a little used designjet 500 and do not see in the characteristics of the product, if it is a printer and strawberry.  Can someone tell me if the designjet 500 printer 24 inches offer traced functions designed to make signs or conrour cuts?

Thanks in advance,

Ken

Hello Ken,

Designjet 500 has the ability to cut the paper/online support right (at the end of the print job to the Cup/entity roller ring at the end of the print job), but I do not think that this option fits your requirements.

Kind regards

Ask me

Tags: HP Printers

Similar Questions

  • Designjet 500 proposed purple colors AutoCAD printing gray

    We used the Designjet for years and have several colors put in place to print gray and projected (252, 253, 254 and 25).  They have recently started with purple print.  I have run all diagnostics and calibrations and alignments available, and they are all good.  I looked at several troubleshooting sites and had no luck.  I use AutoCAD v 13.

    Assuming that the print heads are out of all the colors correctly, try this:

    The printer HP Designjet 500 and 800 series printers have a fix that was implemented in the version of firmware A.02.08 and higher. This hotfix provides additional media profiles that prevent blue to mauve color output change. This fix is only applicable to the series 500 and 800 and only if the printer has a version of firmware of A.02.08 or higher. Once the firmware has been upgraded, follow the steps below to make the appropriate changes in the Panel menu front printers:

    1.

    Highlight the menu paper icon on the display on the front panel of the printer and press ENTER.
    2.

    Scroll to the paper type and press ENTER.
    3.

    Highlight Enhanced colors and press ENTER.
    4.

    Select the type of paper there and then press ENTER.
    5.

    Press the Menu key to return to the normal display of front panel

  • HP Designjet 500 42: Old problem of driver update

    Hello

    I have HP Designjet 500 printer 42 in. And I can't update the old drivers. I downloaded new drivers drivers

    Installed new drivers and the printer connected to the computer. Installed printer itself. Driver version but check it shows in 6.08 (preferably printer-> subject) window.

    I deleted all drivers using pnputil.exe d Oem # .inf and printui/s/T2 orders. All the drivers of HP has been removed from

    C:\Windows\System32\DriverStore\FileRepository

    and

    C:\Windows\System32\spool\drivers\x64\3

    Installed new drivers (8.10) and pluged in the printer. Printer has been installed but with drivers 6.08. So I went to the "print management" as an administrator. Pressed on HP Designjet 500 42 by HP printer 'Manage sharing'-> "Advansed"-> "New driver"-> 'Disc' and in C:\Windows\System32\DriverStore\FileRepository I chose "dsgj510.inf_amd64_* *" folder and the dsgj510.inf file here. But could not find "HP Designjet 500 printer 42 in.". Here only:

    HP Designjet 500 42 + HPGL2 card; HP Designjet 500 plus 42; HP Designjet 500ps plus 42; HP Designjet 500PS42 + HPGL2 card; HP Designjet 510 42 inch printer and HP Designjet 510ps 42-inch printer.

    I tried to use HP Designjet 500 42 + HPGL2 card HP Designjet 500 plus 42 drivers. But printer would give an error message and do not print.

    With the help of the 6.08 driver version I can print from some software, but I need to print from AutoCAD. And AutoCAD gives me the error message "no: cannot use this configuration of tracer for one of the following reasons: the driver is not found, cannot find the device or the driver has a problem." No device has been substituted. "And I can't choose the HP designjet 500 printer in AutoCAD.

    It is a shared printer and other computers on the network have 8.10 drivers and can print from AutoCAD. Single computer, the printer is pluged cannot print because it driver 6.08.

    I found the problem.

    On the page under 10 64-bit windows this is only "HP Designjet 500 and 510 HP-GL/2 and HP RTL driver 64 bit" 8.10 drivers. And this driver is not HP Designjet 500 printer 42-inch drivers. But under 64-bit windows 8, here's two pilots. "Driver HP DesignJet 500 PCL3GUI 64-bit" 8.10 drivers and same as above. This file have drivers for HP Designjet 500 printer 42 inches and runs under windows 10.

    If HP support lazy to put all work them drivers under windows 10 for HP Designjet 500 printer.

  • HP Designjet 500 42 "do not print

    Looking for help with my HP plotter. Recently, I replaced the service station and print transport. I also downloaded the driver (Driver HP DesignJet 500 PCL3GUI 32-bit) and firmware (series of printer HP Designjet 500, 510 and 800 Firmware Upgrade) to new pc XP from the original pc used for printing crashed. The printer displays indication normal and says ready for jobs however when I send a print to the printer it just shows treatment work and transport movements feeling left right at a few times, but the jobs do not print. Also, it seems to stay forever in this (suspended) mode and I have to power the printer off to return to the normal screen ready.

    What is a driver/firmware issue or hardware?

    If I try to print a configuration page it also does the same thing.

    Thanks in advance.

    Jacob

    It is a thin cable error. The ends of the cable have questions or it is not completely sitting in the cart. I guess the cable could be as bad.

  • HP designjet 500 plus network problem

    Hello

    I'll need your help. I have the HP designjet 500 printer more and today I bought the HP JET DIRECT 620N NETWORK CARD. I installed inside the socket, connecting the card with an ethernet to pc cable. I went to the installation of hp on the monitor, select Yes for cfg network, ip and dhcp, I reboot the tracer and in the monitor shows he gets the local IP 192.168.1.2 as well as info from rest, which is are in conflict with other devices on the network. The problem is that im trying to find the printer over the network connections on my windows xp pro, but it does not show on the results. I don't see that there is an icon that does not give me an error. I also tried to see my tracer of the firefox browser with the local IP which has achieved and open the menu normally, showing how the network works. I tried several times to reboot pc and tracer in case they are blocked, but got the same problem. Perhaps there is a driver for win xp to see the plotter on LAN? I need to have your help as soon as possible, because a lot of work to do with the tracer and this question comes back to me.

    PS I should mention that I currently have a network with 3 pc the on the Office that they link together without any problem.

    P.S. This thread has been moved to printers - LaserJet for printers - Designjet & large Format. Forum Moderator - HP

    First off there are 2 homes EIO to the back, so you messed up there. With the power off, install the gl2 card in another location and see if you still have the problem. There may be a plaque on the slot, held in place with a screw at the top and bottom. Just remove the 2 screws and remove the cover and install the card.

  • Unable to drawings SolidWorks great impression for HP DesignJet 500 via Server

    Hello

    Our company has a HP DesignJet 500 with 24 "Inker for tracing large pages of design drawings created in SolidWorks to our technical workstations.  These workstations all have Windows 7 64-bit with 8 GB to 16 GB of RAM and 1 TB of hard drives and intrigue to the drawing via on board our servers (Server 2008 32 bit with 4 GB of RAM), which connects to turn over a connection IP to JetDirect EX Plus (with a sleeve of 10 Mbit / s and a CAT 5 network cable) and a parallel cable.  Lately we had problems tracing of parts of very large assembly drawings (100 MB + size), by which desktop lock when trying to trace.  They can even preview before printing (print dialog box disappears when the user clicks the Preview button).  Restart the plotter and the JetDirect gave no results better.  The server has plotter driver installed v6.08 (data file version 2.1), and the tracer itself is on firmware 3.03 version.  No errors are appearing on the plotter except an error of 79:04 in December.  Tracing a bitmap file doesn't seem to be a problem, but I could not try the other formats again.

    Any thoughts?

    Thanks in advance,

    Michael

    In the properties of the driver, there is a tab services which must display a troubleshooting icon and you can click on "Run as bitmap".  This will allow the desktop process files to print instead of the printer, which cannot process large files.  It is the only way to execute works of old printers not designed to process.

  • DesignJet 500 Panel backlight control

    I have a DesignJet 500 that I haven't used in a while and I am sure at one time given lit control panel so I could better see things, but I can't find any option for this light. Does anyone know how to do this?

    Any help would be appreciated.

    There is no backlight on LCD liquid tht, only a contrast adjustment in the front panel of the box set up printer options.

  • Designjet 500 24 '': hp designjet 500

    I just got the printer HP Designjet 500 24 "."  I downloaded the drivers there.   I went to devices and printers and clicked on the new printer.  The designjet is not discovered.  Tried to do it manually, but I don't know my way around that.  Any tips?

    I deleted all of the printers I had and restarted the computer and tried to add again.  No dice.  He is grateful to my other main printer without problem.  Do not know how to move forward to get the designjet recognized so I can start printing my game.

    I went to the properties of the print server and the driver installed there - "HP Designjet 500 24 by HP" that still did not help.

    I found a link that has helped to explain how to add a local printer by using the tcp/ip address or the host name.  I finally got to work!  I struggled for a good 3 hours trying to find different ways to add.

  • HP Designjet 500: Driver for Hp Designjet 500 42 invalid in Win 64

    I downloaded the driver for mi hp designjet 500 42 (c7770b) printer in windows 7 Professional 64-bit (with all the software updates for today 02/20/2015). When I double click on the exe file you downloaded here: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=377948&lang=en&lang=en&cc=us&cc=us

    I got the message "it is not an application valid win32" and it is impossible to install.

    Hello

    You have the same error for all drivers below?

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=377948&swItemId=pl_66260_3&swEnvOid=4063

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=377948&swItemId=pl_56198_2&swEnvOid=4063

    If the same phenomenon occurs for both of the above drivers try, follow these steps, the steps for Windows 7 should be the same as those listed for Windows Vista in the article:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00318556&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0001

    Hope that helps,

    Shlomi

  • HP Designjet 500 more: DRIVER FOR HP Designjet 500 FILE more

    Hello

    HOW to GET Designjet 500 more DRIVER FOR Windows 10 Enterprise 64 - bit OS

    Windows 10 is not released until July 29, pilots and what products will be supported probably won't be out until close.  The HP page here says "compatibility tool soon, come back in the end of July."

    That said, I use the old driver Windows XP x 64 on my decades old Designjet 650 c in Windows 10 preview.  I think Windows 7 or 8/8.1 drivers work in Windows 10 for the Designjet 500 if there is not drivers provided.  At this point there are sixteen variations of HP Designjet 500 models available through Windows Update, including variants of the 24 "and 42" models, standards, and only, HP and Microsoft provided drivers PS mono models and color and HPGL2 drivers.

  • Designjet 500 prints on usb but not ethernet

    I inherited a DesignJet 500 printer 24 in. I can print so that I am related to him by a USB cable but when I try to set up on my network, I can't print to it across the network.  I can ping the JetDirect card and can telnet in as well so I know that I have the correct IP address and it the card itself can communicate with my network.  I use the same driver via the USB port and the network port but still unable to print over the network.  Any ideas why I can connect to the printer on my network, but I can't print on it unless I connected locally with a USB cable?  I tried with a laptop running XP32bit and Win7 64 bit with the same results.

    Thanks for the help.

    Thanks to the entrance to the Forum of commercial products.  BTW, I discover to my problem.  It looks like the problem was the cable used to connect to my network.  One of the things that I should have checked first, but don't have.  After replacing the cable, I was able to print from the network to it.

  • Designjet 500-42

    I have a little trouble with the end of the electronic module of the thin cable.  Such as... there is just not enough room to work between the ferrite block; the tensile strength of the cable Ribbon or elasticity is when hoping to define the drivers in place on the connector of the card and Ribbon ties.

    The manual shows a photo... without referencing anything due to IT... the connectors; the margin of alignment to allowed, etc. but it also shows the electronic module... torn, articulated on and off vertical/Plumb final installation... but this, it seems to be added place to work.

    Just because the manual does NOT move the electronic module... I thought I would ask if I am tracking properly on the best method to install the end EM of the cable.  It was a day of frustration, and it doesn't seem to be any validation of my opinion on the attached chart of the DJ 500-42 manual.

    Thank you!!

    Dan Turner

    Conyers, Georgia

    The drawing that show you is only to align the red line. Refer to the drawing in the manual to remove the cables in the emod is it more clear here how to put them back in. Space is tight, but put you the a to the back of the drawing first Board, then the front one. With both you have the holding clip out, insert the cable and press the fixing clip in each of the slots after inserting the cable.into each slot one at a time.

  • HP DesignJet 500

    My 500 was printing very well.

    I need to change the paper and while doing so, I received a "System error 21:10" "call HP Service"

    THE PRINTER IS NOW "LOCKED" AND NOT RESPOND TO ANY INPUT COMMANDS TO THE KEYBOARD LOCAL PRINTERS.

    This error is usually due to an obstacle (such as torn paper piece) inside the gas station (where the transport is parked during printing).  Open the front window and closely monitor movements of wiper gas station, remove obstacle, as appropriate (it takes a little experience of service and attention).

    If the error is due to the failure of the hardware, the device may need service.

  • Designjet 500 error 86.01

    Hello
    Can someone help me with this error, I checked many instances and their share, I know that it is caused by a paper jam or a worn belt.
    I have this printer from someone who obviously had a go before, he had a missing transport Bush and two screws missing petrol station. I've sorted but there still problem, new belt with very little dust around looks spindle motor, have replaced the cables as soldering a few contacts were ragged and faded, the new trolley and cleaned and oiled guide bars. I also have a new band (not yet equipped) encoding the original looks ok through a magnifying glass. Power it will through diagnostics and transport moves approximately 1/4 "to the left and back to 86.01 position error code, this is the case whenever I post transport. I tried checking the system, but there are locking in an attempt to drive the cart. Can a faulty spindle motor this error code? also the engine Board axis can give same code? If so someone know a method to check one or both of these components.

    There may be more that just this fault, I suppose it shouldn't be able to until you press the power button, unfortunately it is one (starts immediately when it is plugged). Also, it is not off in failure mode. Steady green power led turns green after being pressed, constant on and off with the Panel displaying the same error code flashing.

    Any help appreciated
    Rob

    Hi bobmcm581,

    The Designjet is a commercial product.  I you a link towards the Designjet forums try to repost your question here for better coverage.

    Designjet Forums

  • Designjet 500 error 22:10

    After replacing a broken belt I started having a 22:10 error when you try to print.

    The printer appears to initialize OK and comes to the 'ready' State, but when I try to print (printer info/config), the paper advances about 10mm (3/8 "), stops and then I get the 22:10 error.

    If I press the button enter I get a secondary message 0 x 3020001, pmpmotor.c

    I replaced the ink supply station but the error remains.

    Any ideas would be greatly appreciated.

    Not an error of the gas station. You check the connections of the power station (where the ink cartridges are found). If no joy remove all 4 ink cartridges, start tracer and insert one at a time.

    System error: 22:10
    Problem
    Description:
    Failure of the ink supply Station. Possible cause can be:
    1. reading, writing or initialization of the EEROM backup failed.
    2. one of the out-of-ink sensors (located in the ink supply Station)
    irrelevant as it should during the initialization process
    so that the depressurization.
    Corrective action: replace the ink tank Station ⇒ Page 8-48.

Maybe you are looking for

  • Do I need to use snow leopard installation discs to clear and then pass on late 2007 MacBook running 10.5.6?

    Yet another question about the old MacBook crafty as questions involve. I begin to feel that the only way to clean it and the Mac is with software disks. Can I directly go with Snow Leopard, or do I have the disks to Leopard 10.5? If theres an easier

  • On my Satellite seems strange rattling type noise

    I've had this laptop for a year and a half now, and it never did this before noise. I turned it on this morning, and a strange guy clicking noise began.It does not constantly noise, just for a few seconds every few minutes... looks like it's from the

  • Satellite A50 PSA50A - CPU, RAM, HDD upgrade question

    I wanted a laptop and my partner who is not real Smart PC (bless his heart) was released without my knowleadge and bought me a second hand laptop. That I really appreciate his kindness. I have a Toshiba Satellite model PSA50A - 7 k 047 number.I know

  • power supply subbly

    Hello I have a HP 6000 Pro SFF PDC small form factor with a unit power of 320 watts subbly. Available IIs a 550 Watt subbly unit or more? Or what can I do to change this PC for a good computer player? Thanks a lot for your answers Simone

  • I'M HARD BRICKS! 0x1000 could not start

    I am a curious user? YES, I use RSD Lite decommissioning of this 'new' MotoBlur slow and horrible Slow down Android 'update' 4.5.91 to 4.1.83 once again and now I have the boot failure 0 x 1000? YES, I'm st * d? YES, I'm alone? NOOOOO we're so st * d