HP Deskjet 1050 All - in - One J41: scan lost desktop icon!

Similar Questions

• HP Deskjet 1050 all-in-one: cannot parse with the new 1050

  I've been scanning with Adobe Acrobat 8 Professional and a Lexmark printer all-in-one.

  Printhead from the printer become blocked, and fixing was too expensive, so I bought this HP printer. Installed and it is lacking. It prints and copies fine.

  When I tried to scan, Acrobat knew HP was there and he tried the Lexmark. When I plugged on the Lexmark, he systematically planted everything I tried.

  The only change is the new printer. Somehow its installation has made it impossible for me to analyze each device.

  I'm at my wit's end. Help, please.

  Thank you

  Bob

  Hi Bob,

  Acrobat Professional 8 are supported Twain compatible devices, while the HP printer do not support Apple ICA applications.

  As a reference, you can find the following Adobe article:

  Acrobat has ICA support on MAC 10.7 for now with Acrobat XI only
  

  https://helpx.Adobe.com/Acrobat/KB/Troubleshoot-scanning-problems-Acrobat-8.html

  You can scan using Capture of Image or the HP scanning application, then open / import the digitized in Adobe.

  You can find specifications listed below, sweeping an available Twain compatible software interface only for Windows:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c02063036/

  You can find measures to scan with your printer in the following link:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03548786/

  Kind regards

  Shlomi

• DeskJet 1050 All - in - One J410: update to W - 10. Can'f find the printer CD. All of this. Help, please.

  After the upgrade of Windows 10, I need to set up my HP printer so work functions.  I've looked everywhere but can't find my CD for my Deskjet 1050 all-in-One J410 series printer.  I have everything, including my FedEx slip sent to me with my current address.  I have the serial and FPU n # also and will give this info if necessary.  I just want my printer works properly.  Is there anyway that I can do it without my CD?  To use an old term of chess, I'm just a 'wood' push, but you people are masters and experts, so can someone there help me, please?

  Hello

  Kindly click on the following link to install the driver.

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-1050-all-in-one-printer-series---J410/4027462/model/4027464#Z7_3054ICK0KGTE30AQO5O3KA30R1

  I work for HP.

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

• DeskJet 1050 all-in-one j410 for windows8 series driver

  DeskJet 1050 all-in-one j410 for windows8 series driver

  Hello

  Please Download Full Feature software and drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4027465

  Kind regards.

• DESKJET 3050 ALL - IN - ONE J610: scanning documents old printer/scanner

  EASY, I HAVE TO FOLLOW THE DIRECTIONS ON THE SCAN INTO A WORD DOCUMENT OR EMAIL. I HAVE A SCAN BUTTON, BUT I DON'T KNOW HOW TO SO HE COULD ANALYZE. IT SIMPLY PRINTS ANOTHER COPY!

  THE PRINTER IS OLD, RELATIVELY SPEAKING (MAYBE 4-5 YEARS) AND I DON'T REMEMBER IF I'VE EVER USED THE SCAN FUNCTION. I USE WINDOWS 7.

  PRODUCT NUMBER: CN [personal information]. HELP APPRECIATED

  Hi @Grandmatothree,

  Welcome to the HP Forums!

  I understand that you're wondering how to scan with your printer HP Deskjet 3050 on Windows 7, and I'm happy to help you!

  Please follow the steps in this guide, using full HP software (Windows 7) scanning function.

  For future reference, hereis the User Guide for the your printer.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• DeskJet 1050 All in one J410: how to get the manual for Deskjet 1050 All in one series J410

  How can I get the manual? Thanks for your help!

  You got it out of the memory of your computer (C), but try to get out of the internet! In any case, thanks for your help.

• DeskJet 1050 all-in one J410 s: Get shortcuts for Office

  I recently bought a new computer and an established expert in place. But without shortcuts HP!    I had a little on my old computer and I want to also some HP shortcuts now. I have a lot of files HP, tell me please who have need of a shortcut and the names of them. I can print OK and copy OK but I need a shortcut for the analysis can be done and if I am having trouble in the future. Thank you!

  Hello

  Follow this tool, it must obtain and launch the newest comprehensive software HP for your printer:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PIW

  After completing the installation, you will see HP shortcuts on your desktop.

  Shlomi

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Unable to install printer Deskjet F4280 all-in-one Windows Pro 8.1

  A week ago my laptop with Windows Pro 8.1 was a significant error and he stopped, then I restarted the operating system with a previous image of the hard drive C. I reinstalled another printer and I tried very time to reinstall the HP Deskjet F4280 all-in-one with the latest driver and with the installation of the Printer Wizard uploaded by HP web site. Unfortunately every time installation fails during step "product configuration" after a lot of minutes to expire. The error was the last time.

  CSetupWrapperApp: No section name specified on the command line
  = Application did not return ERROR_SUCCESS. Returned 0 x 1
  LaunchApp (x:\hpqtra08.exe-arret, 1, 00000000, 00000000) failed with 2
  Error opening key HKLM\SOFTWARE\Hewlett-Packard\Install\{8C925017-72A8-4C4A-AF21-84901E26638F}. error = 2
  Timed out waiting for event of finished product.

  I used your HP print and Scan doctor and I followed all instaructions and in the end, no solution has been discovered. Other applications normally run without problem and laptop works fine. I installed Windows Pro 8.1 almost a year ago and until a week ago, I have no problem with the HP printer above. I can solve this installation problem?

  Best regards

  Francesco Patrignani

  Multifunction,

  Thank you for the update. The registry document I sent should apply to all computers in Windows 8. Please try to follow these steps.

  If you do not provide the error log, which could be very useful. This will help me to refine the question. Also, I do not fear spend 20 minutes reading code until something is different.

  I will help you with pleasure until the issue is resolved. If you find my help, you can keep tagging my posts with congratulations and accepted Solutions. It would be appreciated.

  Have a great day!

  Mario

• DeskJet 2542 all-in-one: parse error message prints well

  I kept getting this error trying to scan a document for the first time.

  "An error occurred all in communicating with the device. Please check that the device is correctly connected and powered. »

  To make sure that the printer is connected I printed a pdf on file on the computer and managed.

  I installed from the given CD and I intalled software on the HP site that grew to my specific operating system OS X 10.9.  I checked my firewall and allowed him to be opened for printer sharing.  I restarted my modem wifi network, I restarted the computer, and I restarted the printer.  I have reset my printers and reselected this printer... which is the only printer that was available for selection.  The computer recognizes the printer completely, however it just keeps giving me the message quoted above for scanning.

  Help, please.

  Hello @Elochin and welcome to the Forums of HP!

  I understand that you are having problems of scanning.  I would like to help!

  You have problems, make a copy?

  I have a few steps, I recommend you:

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 2540-All - in - One Printer full feature software and drivers series.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Deskjet 3070 (All-in-one/Wireless) install problem Win 7 64

  Hello world

  I wonder if others have had similar problems or ideas on the underside, surely I can't be the only one to use this installation/suffering with this problem.

  Printers: HP Deskjet 3070 All in One (USB/Wifi)

  Operating systems: Windows 7 64-bit (installed absolutely fine on Win 7 32 bit laptop computer connected via wifi).

  Setup: - a Homehub BT, providing WiFi for laptop (Win7 32 bit), a desktop computer (WinXP SP3), the printer has an IP address, which is visible on the home network map - it has a MAC address also. My PC: connected by Ethernet to the homehub which is currently running wifi for all of the foregoing.

  Drivers using downloaded: -.

  + Computer laptop Win 7 32 bits connected via WiFi to the Homehub - installed fine, found printer - this is the stage where the printer receives a configuration intial IP address / completed.

  + WinXP SP3 connected through WiFi to Homhub - as above, correct, opportunity driver found the printer (which, at this time already, there).

  If the printer exists within the network, other computers can see / use it.

  ++ My PC: Win 7 64 bit connected by ETHERNET to Homehub (she does not and will not have a wireless option).

  Downloaded the drivers to install HP. (later tried "Run as Administrator"), select the software components (i.e. Remove feedback/coupons etc), installs OK applications, next step is the configuration of the printer. Add a new printer. "Check network" window appears with the message "Checking network environment" bar and the State. The status bar springs upward but stops dead at the filled Stadium. No possibility to choose whatever it, pressing Cancel has no effect. End of task here generates an error of 'work '. 'devicesetup.exe' stopped The installer never ends, applications are installed, but at no time, it shows the printer/selection.

  I tried many things: complete uninstall "engines", which in this case seem to be the only applications, ensure that all non-essential startup items are disabled, make sure that the firewall is DISABLED (just to be sure), ensure that the anti-virus is disabled there is, in fact, no other printer installed (this computer never had a printer attached to it) make sure file sharing and printing are powered, ensure that there is no TCP/IP/ports printers mapped etc... Still the same error, old or new drivers, always the same - installation does not complete.

  All the doctor diagnostic tools/printing tell me I have to install the driver software (I agree) but direct me to the HP site to download the ones I already have.

  I can't enter the Server Web integrated (the PC where I can't install the drivers, or one of the 2 PC's who have installed correctly). One of them if I click on networking or wireless or advanced it warns a HTTPS connection and then fails with "internal server error".

  My questions to someone kind enough to read this wall of text: -.

  + Anyone has any ideas please? I would prefer not to return the printer as defective because it seems to be a good all-rounder and it works for 2 other PCs in the House, its just mine which does not connect! Sad...

  I'll try the USB installation and then removing the USB-> wireless to see if that can help. I had previously seen articles where people offer to buy a router to 3rd party like that is basically a wifi pass through broadcaster. It is not for me thanks

  Thank you all for reading at least, it's now corrected with slightly reduced functionality.

  Install the USB printer, then DO NOT convert into wireless via HP drivers/installation.

  Change the USB to a TCP/IP port port newly created under the control panel of the printer (windows 7), enter the IP manually to the printer - you want an IP address that will change not in order to make this work - forcing the Home Hub to never provide that the same IP unique to this particular device was the easiest way for me. This connected but showed as offline printer constantly, others may have different experiences.

  To fix that (for me): -.

  Installing the printer in Control Panel Goto, force reinstall drivers HP ("via the drive"). Make sure that all the old files are overwritten. Turn the printer and then turn on (power button - twice if in mode "standby" to disable). Wait until the wireless light will stop flashing and become solid blue. Check in Control Panel if the status is online, if so you are good to go

  As a result of this sabotage, you lose the feature advanced scan for PC etc etc, but the real impression seems to be absolutely perfect. The printer is always available to everyone on the network, etc.

  Good luck to all.

  Alex

• HP Deskjet 3050 All in One J610 - do not connect to the network

  Hello

  I have a HP Deskjet 3050 All in One J610 peripheral.

  It worked fine for about a year, until one day he simply ceased to connect wireless to my network.

  I have not changed anything in the network, so I don't really have an idea why this happenned.

  The 'Wireless' has stopped flashing and I cannot know where to choose my network of. He asks a PIN (?) when I go to the wireless setup.

  Problem solved.
  I used the HP print and Scan Doctor tools, helped me to solve the problem.
  Thanks for reading my post and sorry for the spam your forums

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• New Deskjet F4185 All in One or any other printer Deskjet F4185 software needed, Pls!

  Hello world

  Can someone help me get a new Deskjet F4185 or any other printer Deskjet F4185 software.

  Your recommendation is much appreciated. Thank you.

  Hello andruanus,

  Take a look at this link.

  HP Deskjet F4185 all-in-One color inkjet - printer / copier / scanner