HP Deskjet 1051 J410 series: cannot print from HP Deskjet 1051 J410

I have a HP Deskjet 1051 J410 and cannot print because I updated to Windows 10. I ran the store & under details, he says he detects a problem, but does not say what it is. The printer appears under devices & Printers & said it working properly & has the updated device driver. I have updated the driver from the HP website, but it says driver 1050 instead of 1051. The printer does not appear under Apps > HP anywhere. I removed the

PRI friendship & reinstalled the HP site I don't have the disk. The USB Port has disappeared after that. So I know that it is not connected to the right port, because it is no longer an option under ports to connect to. A details page of the printer did print at some point, but I can't print from Office, etc. I unplugged the printer from the back & the output. This back in & connected to my laptop HP Presario CQ62 plugged. I restarted my laptop a couple of times. Nothing works. I have also no error message. Can anyone help please?

Thank you or all of your great suggestions. I ended up doing a repair of Windows 10 installation & that seems to have solved the problem. Thanks again!

Tags: HP Printers

Similar Questions

  • Cannot print from Firefox 3.6.13

    Cannot print from Firefox. 3.6.13. says it's printing, but only a blank page comes out of the printer. Safari works fine, but I like Firefox. With the help of Mac 10.6.5.

    Probably caused by a Bug in Firefox, which is supposed to be fixed in versions of Firefox 4.0. Until Firefox 4 is out, my suggestion is to use the preview before printing and if the preview is empty use Safari to print this page. This extension will allow you to click right into Firefox and open the same page in Safari, so you don't have to copy' only paste the URL.

    https://addons.Mozilla.org/en-us/Firefox/addon/open-in-Safari/

  • My HP Officejet Pro 8600 cannot print from my MacBook Air

    Hello

    My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

    Hello boojoo1tw,

    Welcome to the HP Forums!

    I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

    If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

    Please post your results, I'll be looking forward to hear from you.

  • HP MFP M225: cannot print from my computer while receiving a fax

    We cannot print from our jobs while receiving a fax.  Just had a big fax that took 20 minutes to come through, our work was at a standstill because of this.  Have had other multifunction machines that we could print or copy when you receive faxes.  Is there a setting somewhere that I'm missing?

    Hi @spd9602,

    Thank you for visiting the Forums from the HP Support! I understand you want to be able to use your HP LaserJet Pro colour M225 while she receives a fax.

    There is no setting or feature that you are missing. When a Fax is coming through, you cannot use the other features of the LaserJet printer.

    Even if you print a document, you would be unable to receive a fax or make a copy.

    One alternative may be scanning and sending larger documents then the LJ is not supported by a function for so long.

    I hope this helps!

  • Cannot print from FSX w/acceleration, no further questions. Running Windows 7 64 bit.

    I have FSX w/acceleration installed for a few years now on my HP G71 dual core laptop and it works great, that I had no problem at all. It was my first attempt to print from it however. I wanted to print a flight plan, click on the "print" button and nothing happened. I went to the Panel, open Printers and devices, and my printer was there, online and ready without papers pending. I went to properties and even printed a test page, so I know that the issue is not with the printer. For some reason any FSX does not send the document to the printer. How can I remedy, which should look and where? Thank you in advance for any light that can be shared.

    The duplicate thread information:

    Cannot print from FSX w/acceleration, no further questions. Running Windows 7 64 bit.

    I have FSX w/acceleration installed for a few years now on my HP G71 dual core laptop and it works great, that I had no problem at all. It was my first attempt to print from it however. I wanted to print a flight plan, click on the "print" button and nothing happened. I went to the Panel, open Printers and devices, and my printer was there, online and ready without papers pending. I went to properties and even printed a test page, so I know that the issue is not with the printer. For some reason any FSX does not send the document to the printer. How can I remedy, which should look and where? Thank you in advance for any light that can be shared.

    Hello

    The question you have posted is related to games for Microsoft Flight Simulator X and it would be better suited to the community of players for Windows.

    Please visit the links below to find a community that will provide the support you want for better assistance.

    Games for Windows:

    http://forums.Xbox.com/GFW/default.aspx

    http://forums.Xbox.com/GFW/games_discussion/pc_games_e-k/f/295.aspx

    Support of Microsoft Flight Simulator:

    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    I hope that the information above helps you.

  • Can print control panel test pages, but cannot print from applications (Word, WP)

    Original title: can print test of control panel pages, but cannot print from applications (Word, WP) no error no message other than can not find printer.

    Recently upgraded to SSD as boot drive.  everything is working except cannot print from Word, WP or any application (Editor, etc.).  Can print test pages to control panel on each installed printer, and do not appear.  Try to print from Word he pauses and says "cannot find the printer."  Tried reinstalling Word without solving the problem.  I don't know that the problem is Windows 7 related, not printer hardware problem.  Several times reinstalled printer that also does not resolve the issue.  Any ideas?  Anyone?  Anyone?

    Hi Doug,


    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
     

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    1. What is the brand and model of the computer and the printer?
    2. have you made any recent hardware or exchange of software on your computer before the show?
     

     
    Please follow the methods and mark the question below:

    Method 1:


    Step 1:

    Run the Microsoft Fix It from the link below.

    Diagnose and automatically fix problems printing and printer:
    http://support.Microsoft.com/mats/printing_problems/
    Step 2:

    Follow the steps in the link below.

     

    Method 2:

    Follow the steps in the link below.
    Method 3:
    Follow the steps in the link below.
     

    If the problem persists then I suggest to uninstall and reinstall the printer drivers.

     
     
    I hope that the information above helps you.
  • Cannot print from a wireless printer

    I installed hp photosmart 6510 wireless successfully, but I can't print from my computer... Troubleshooting, deletes the file from the stone and no indication no more errors and try to print again... the printer itself is operational and print directly from the internet, although... Can you? Help

    OT: I installed the wireless printer but cannot print from printing a stone... Troubleshooting removes the file and said: problem solved, but I still can't print. Can you help me

    Hello

    You did changes to the computer before the show?

    I suggest you try all the steps from the following link:

    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • Cannot print from MS Word 2007 P1606dn

    With the help of Windows 7 (64-bit). Just installed my HP laser printer model P1606dn. cannot print from MS Word documents. Reads "problem sending a command to the program". Troubleshooting solutions on the internet all the State spooler problem.

    Not familiar with the technical terms. Really need help, thank you.

    Lenelk

    Hi lenelk,

    This seems to be a problem with Microsoft word.

    What happens if you print from WordPad?

  • HP deskjet 3540 series (D142AF: cannot print from my computer hp laptop)

    I had downloaded fax from windows and scan and was able to print. I tried printing from my computer hp laptop today and even is printing... No error came place and so I do not know which causes this problem. Please can you help me?

    Thanks for your help! I am now able to print again... I'm selecting the incorrect printer by mistake before

  • HP Deskjet 2510. Cannot print from PC.

    I have some - PDF995 - software on my PC that converts documents to PDF format.  It seems to interfere with the printing of documents for the screen, with my HP Deskjet 2510.  Whenever I try to print a document, after hitting the "print" key, the PDF995 software opens each time.  I have the HP printer as my default printer selected, and I also select him as the printer you want before you hit 'print '.  But the software PDF 995 maintains just opening.   Any ideas would be appreciated gratefully.   Thank you.

    Hi wilen,.

    Welcome to the Forums of HP Support! I see that you are using a free pdf converter software and it interferes with your HP Deskjet 2510 printer. When you try and print a document, even if your DJ 2510 is set as your default PDF995 software opens instead.

    After some research on the PDF995, I managed to download on my computer running Windows 7, download a file readme.html gave me. I noticed that it states the following:

    "Print a document from any application by choosing the PDF995 printer in the printer dialog box. Do NOT select "print to a file." You will be asked to enter the name of the PDF file you want to create. "

    It tell me that it will automatically set the PDF995 printer driver to the printer by default, after you have downloaded and installed, I go to my devices and printers the PDF995 has been set as the default printer. When I changed the default value for my HP printer you want, my pdf software arises as well. I made sure to hit them apply and save the changes. When I went to print it printed on the HP printer - I don't have the pop up.

    I know that you have already configured your printer by default for DJ 2510, but please try the following steps, listed here:

    1. go to your devices and printers

    2. right click on your DJ 2510, and then select set as default printer

    3 now, please do a restart of your computer

    4. Once your computer is back, please make sure the DJ 2510 is always defined as a default

    5. now move forward a document place desired that you want to print

    6. go in the file options and scrolling to print

    7. your printer dialog box opens, your DJ 2510 must always be on the defaultprinter

    8. click on print and the test document

    Were you able to print correctly without the pdf995 software arise? If this is not the case, continue below:

    Go ahead and run HP print and Scan Doctor- it has been designed to provide users troubleshooting by HP and features fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

    Also, I found when I used the software, I kept getting annoying pop ups, I have found this:

    "The free versions display a sponsor page in your web browser each time that you run the software. If you prefer not to see sponsor pages, you may upgrade by obtaining each of the keys

    Please take a look at the pdf995 frequently asked Questions: FAQ

    I hope this helps, please let me know the result if you use always problems, please leave the following information:

    1. What is your operating system?

    2. have you tried to use the command print-Ctrl + P? Do you have the same results?

    3. what browser are you using to print from, or what program?

    I'll watch for your reply.

    I found this information here: http://www.software995.com/

    Thank you

  • All-in-one printer, HP Deskjet F4480 cannot print from the INTERNET?

    You encounter problems, printing from the internet HP Deskjet F4480 all-in-one printer?

    Sometimes nothing prints, part of the page is missing, print headers only and etc. No worries, I have a document that can help you with this problem.

    This link will provide you with the differenct steps that will solve this problem.

    http://support.HP.com/us-en/document/buu01105

    If you have any questions, feel free to ask. I hope this helps.

  • After installing new ink cartridge cannot print from ipad hp 5510 series

    Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

    I can print from the laptop based on windows.

    the two settled on a wireless router.

    Help!

    (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

    Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

    I've corrected the printer IP addy... and viola.

    IPad and laptop computer are once more compatible with the printer.

    Appreciate your message...

    Louise

  • HP Deskjet 3522. Cannot print from the windows photo gallery

    Hello

    I use windows vista home premum. I am connected via a wireless network. I can't my phone eprint and print photos from my email. I can also print from the internet. When I try to print a picture from my hard drive I get "unable to communicate with the printer" error message. The message to suggest that I update my IP address. The IP address is updated and accurate. Also, when I check my status of the printer, everything is OK and I can print the test very well. Help, please!

    Thank you!!

    It worked! I removed my old printers and it will show now! Thanks for the help!

  • OfficeJet 4630 cannot print from Word 2013

    Hello!

    I bought a printer all-in-one Officejet 4630 a few months ago, and all went well until a few days ago: all of a sudden, I was unable to print Word files (2013), or Notepad files ("the parameter is incorrect" message).

    Printing of PDF files and anything from the Web works fine.

    I did not make any significant changes to my computer or a printer.

    I am running Windows 8.1 on a HP Pavilion laptop.

    I tried to uninstall and reinstall the printer several times.

    I ran printing HP and doctor Scan, and it tells me to reinstall the device software, what I do, without result.

    I checked each forum help on the subject.

    Nothing works.

    Anyone, anywhere, has a solution to this problem?

    Hey @LadySteph12,

    Welcome to the Forums of HP Support!

    I understand that you get the error message "the parameter is incorrect" when you try to print Word and Notepad on your computer Windows 8.1 to your HP Officejet 4630 e-all-in-one printer. I would like to work with you today with the resolution of this problem. At this point, it is not a conflict of driver on your Windows computer.

    Step 1: Uninstall the drivers:

    In order to solve this problem, I will need you to have a nice clean slate to work with. So, I'll have you uninstall the drivers for your printer. To do this properly please follow the steps below.

    1. Open the Start on the computer screen by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
    2. Once your start screen is open, simply type programs and features
    3. Click on programs and features to open it
    4. Once the list of programs fills in the program programs and features, scroll down until you see 4630 Officejet full series or the base driver package and Uninstall it.
    5. Once your bundle of software and the printer driver is deleted, go to the next step.

    Step 2: Delete the Temp folder:

    1. Open your Start screen again by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
    2. Under your start screen, type run. Click Run to open it.
    3. In the run box, type %temp% , and then click OK
    4. In the Temp folder, select Ctrl + A at the same time on your keyboard to select everything in the folder. Select "delete" on your keyboard. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
    5. Once your temporary files are deleted, close the Temp folder.
    6. On your desktop, right-click on the recycling bin and left, click "empty recycle bin"

    Step 3: Reinstall the drivers:

    1. Please select the following link to download the appropriate drivers for your printer again: e-all-in-one HP Officejet 4630 Printer series full feature software and drivers
    2. Once downloaded, let the installation program to run
    3. Follow the instructions on the screen to reinstall your printer.

    If you need help with the reinstall, please see:

    Setting up the printer on a wireless network for the HP Officejet 4630

    Install the software of HP Print to a USB connection in Windows 8

    After reinstalling your printer, try printing from Word or Notepad. If the error "the parameter is incorrect" pop up once again, proceed to the next step.

    Step 4: Adding a driver replacing:

    1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
    2. In the start screen, type "devices and printers".
    3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
    4. In the devices and printers folder right click on your Officejet 4630 and left click on printer properties
    5. Left click on the Advanced tab
    6. Left-click on new driver
    7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of Printers on the right.
    8. Select HP as the manufacturer on the left
    9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
    10. After selecting Deskjet 9800 hit next complete the new driver Wizard
    11. Under the printer properties window, select 'Apply' but do not hit OK
    12. Select the general tab
    13. Rename your printer in HP Officejet 4630
    14. Click OK
    15. Finally, right click on your Officejet one 4630 more time and click on Printing Preferences
    16. Left click on the paper/quality tab
    17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
    18. Press apply and OK
    19. Then try to print from Notepad or Word.

    Please let me know if the steps I have provided to resolve your problem. Good luck!

  • HP officejet pro 8600 - cannot print from my macbook pro

    We just bought a new HP officejet pro 8600 but for some reason, we cannot get my macbook pro to print on it. My mac says it is connected to it. It is listed in the printer only and all the settings look fine, but when I send a document to the printer, it will not be printed. He did print the first day we had (a week ago) but it stopped and we cannot figure out what to do. My daughter's PC will be printed, as well as the pc of my husband. It is the first time that I had problems printing to a hp from my mac. Any thoughts?

    I had my Officejet Pro 8600 about six months.  Recently, I had the same problem.  It continues to print from my Windows computers but not the Mac.   Labour goes into the impression that it is place on a wedge.  I tried many fixes, including the removal of the printer and reinstall.  Usually removing and reinstalling it will fix for a while, but now, even that does not work.  In my view, that the permanent solution is to buy another printer.

Maybe you are looking for