HP Deskjet 2680 print cartridge 60 Black - not compatible

I replaced the cartridge three colors (HP60) both the black print cartridge (HP60).  Exactly the same ones that I took out.  The Tricolor cartridge shows "ready", but I get an error on the black one, saying that the cartridge is missing or incompatible with the device.  Gently, I cleaned the contacts according to the help file.   It is not always recognize the black cartridge.

TIA

It would be correct to assume that the reset is universal. Are these genuine HP cartridges cartridges or have they ever been filled or refurbished? What I want do you is remove the cartridge that does not work, and with a non fluffy cloth and a bit of water, I would like to wipe the power at the rear of the cartridge contacts (the copper bumps) and the corresponding connections inside the machine. You want to unplug the printer for the second half.

Then back - turn on the machine and replace it. Also, I know that this cartridge is new, but have you tried another cartridge to see if it is the cartridge that is defective?

Let me know!

Tags: HP Printers

Similar Questions

  • Print cartridge missing or not detected C4585

    Hello

    I have a photosmart C4585 printer all in one, for a long time, I used hp cartridges-it worked fine until recently when the "print cartridge missing or not detected" message appeared.  I Googled it and found a video on YouTube showing how to remedy this with a particular sequence, which only worked to a print.  Then the error message returned.  I replaced the "truant" cartridges with HP authentic and still always get the same error message.  I am at a loss to know what to do, really can't afford a new printer, my daughters will be lost without a printer for homework!  Please can someone offer me advice?

    Thank you very much in advance.

    Vinia, I understand that you use genuine HP NO ink cartridges. Usually, this creates a problem at the beginning. Even if you were able to print before, using the correct cartridges is the best way.

    Here is a link that might help with this problem.

    http://goo.GL/BI5MB

    I hope this helps, please do not hesitate to ask questions. Thank you

  • Print cartridge missing or not detected message

    Hi - have a HP 4280. I just started to receive message "print cartridge missing or not detected". Have replaced the cartridges with new HPs and no dice. Always get the message. Have restarted printer and still no hemp. Any ideas?

    After cleaning, resets, etc., I got to work by installing the cartridges on the tenth time VERY strongly in their slots... I'm sure this isn't the approved view of HP, but it worked!

  • Series Deskjet 1000 - J110 printer but drivers are not compatible with Mac OX 10.4.11

    I bought a Deskjet 1000 Printer series - J110 printer but drivers are not compatible with Mac OX 10.4.11, which is the mode of systemon my macbook. What can I do to solve the problem?

    I'm sorry, but you won't be able to use it with Mac OS 10.4, this model is supported by Mac OS 10.5.8 and above.

    Most of the latest models sold today is supported by 10.5 and above.

  • DeskJet F4480: full black print cartridge still does not print black. Colors OK.

    What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.

    And... Here is the solution.

    Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.

    The black cartridge has been blocked. The way of difficulty is:

    1. remove the faulty cartridge from the printer.

    2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.

    3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).

    4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).

    5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).

    You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.

  • DeskJet 6122 print with only black print cartridge?

    I had this oldy but goody through local Freecycle (with two sets of ink!) list after knowledge full it works under Linux and openprinting.org it lists as working perfectly. Plug and play installation with Ubuntu, instantly recognized 14.04.

    I think it is indicated only by old-school print/head of cartridge type, but I should be able to use it with the black cartridge only right? I know most recent will force you to have both. I love that the cartridge for the price are very economical too.

    The Deskjet 6122 requires a black cartridge and electric sound color must be installed in the printer to print.  It is not necessary to have ink in all colors, but both cartridges must be installed.

  • Black print cartridge registers is not on the right side of the page

    CP1215 has developed a weird problem! Recently replaced the black print cartridge (new, original HP).

    Printing a document in BLACK color, this isn't a problem. Crisp and clear impressions.

    Print the same document in color gives completely misaligned recording BLACK on the side RIGHT of the page. The side LEFT is clear!

    Printing CONFIGURATION PAGE confirms the problem. Registration of marks below on the LEFT are perfectly aligned.

    But on the lower RIGHT, all colors are aligned with the exception of black - the black line is much higher and offset printing to the right where it should be. That's why the color prints are all blurry on the right side of the page.

    Calibration several times running, check the drivers etc.

    Any help/advice is really appreciated!

    Hi Gemini02,

    Sorry about the long absence, but was busy with other stuff. More beat troubleshooting according to your last email.

    First of all, a few answers to your questions:

    1. don't know what the problem is. Don't want to start replacing immediately.

    2. all ink levels are more than 80%; Black nine.

    3. all the cartridges are original HP Black has been replaced recently, the other three provided with your printer.

    4. the paper is double-a premium, 80gr

    5 paper is set on the plain. Have you tried with the HP90 and light parameters too.

    After following your instructions of troubleshooting:

    6 printer moved closer to the wall outlet - it's a machine heavy tho!

    7 pressed & held green button. Config and supply status printed pages.

    8. print with other applications (Photoshop, Word, PowerPoint and Adobe Reader).

    Problem persisted. Registration completely to the bottom of the hand right side of the page and the worst in the lower corner straight out.

    Acts of desperation next, pure:

    9 deleted each cartridge, shaken several times on the axis horizontal and then triggered one end while decreasing the other and vice-versa several times. Replaced in the status bar.

    10. Ran HP Toolbox calibration.

    11. test print to Adobe Reader - same document as before. Substantial improvement!

    12. Repeat steps 9 and 10. Further improvement.

    13. Repeat steps 9 and 10 more. Almost no problem checking.

    14. Repeat steps 9 and 10 more. No record of the questions at all!

    Then, to avoid the location and power source:

    15. moved printer in its normal location.

    16 connected the printer to its normal power source - an extension of good quality.

    17. reprinted on the same page. No registration no questions at all.

    I have no idea why the steps 9 and 10 would have such an impact. And why repeating them would improve the print quality progressively until no problems are observable. I have detailed my action here in case they can help someone else.

    I thank very you much for the support and guidance you provided. If you have any idea why the repeated shaking and calibration solved this problem, I would be very interested! Keeping in mind I ran several times previously without success to calibration.

    Thanks again for your help.

  • HP psc1350 all-in-one: check printer cartridge error will not clear

    In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

    Hey @dennisc10,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

    If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

    Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP deskjet 1015: My Hp deskjet 1015 prints word documents, but not of PDF files

    I just bought a new Hp deskjet all in a single 1015. It can print word documents, but not file... PDF .Please help

    Hi @AmalTalaat and welcome to the Forums of HP!

    I see you are having problems printing of PDF files.  I would like to help!

    I suggest you perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    I recommend also to download and run the HP print and Scan doctor.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • Deskjet 6988 print cartridge 'door' - cannot access ink cartridges

    This printer has been giving me excellent service for many years, so I'm not surprised that he can do a little wonky. Yet, any advice would be most appreciated!

    Recently, this "door" has popped up, preventing me access to print cartridges:

    It seems to say "turn the printer off," or perhaps "turn off and on again," that would be logical, as requiring to do her little dance and restarts. MOST of the time, it does no good. The cartridges just sitting there, and the door rest.

    However sometimes turning market causes a mechanism to move, and the door up and down and sometimes stays down.

    I saw no references to this 'gate' in the manual. Anyone know what it's called?

    Is there a way to force the printer to zero and drop the door? A factory reset did not work.

    Thank you!

    This fixed/figured it out!

    Remove the Panel on the right side of the printer. It's like two hooks on the top and two clips on the bottom. Gently pull down to unclip. Upwards, you will see the mechanism that connects the cover to a switch. For me, the wire time the "capture" disengaged, and I need to restore the link so that it is engaged when the lid rises or falls. After that I did, the cartridges behaved normally, and the mysterious "door" is never in the way.

  • Print cartridge missing or not detected

    I have a HP Photosmart C4280 running on Windows XP.  Whenever I try to print, I get the message "Missing cartridge printing or undetected"... it seems to be the cartridge three colors, the origin of the problem.  I have taken the cartridges out and then put them, I turned off the printer and then turned back on... the only thing that seems to work is to go into my HP Solution Center, select my printer, select settings, select printer Toolbox, select Services of devices and finally click on print a Diagnostic Page.  Will then and only then the printer print my document - then it prints a page of diagnosis.  I do whenever I want to print something... any suggestions?  I'm wasting ink and paper...

    Hello Loggin

    You use genuine HP cartridges? The article below covers the cartridge for the Photosmart C4280 problems. You recently moved to another country? Sometimes new regions have different cartridges.

    "Incompatible cartridge" or "print cartridge is missing, improperly installed, or not intended for your device.

    Have you tried a new HP ink cartridge yet? In this way, you can locate the problem.

  • HP Deskjet 882C prints only in black and pink

    Hello

    I need assistance with my printer.  Before changing the cartridge, my printer started printing in black and pink only.  Then, I changed the new cartridges and it is always the case.  My OS is windows XP Version 2002, service pack 3.  I have had no changes to the operating system at the start of this problem. Short buying new printer cartridges, I thought I would check with you.

    Thank you.

    The issue has nothing to do with the drivers or the operating system, there is a problem with your cartridges.

    You have probably some very old cartridges #23. The cartridges have a life span and may lose colors (usually of first yellow and cyan) if stored for years. If these are original HP cartridges check cartridge warranty date as shown here.

    If the cartridges are inside their two-year warranty call HP to 1-800-HPINVENt or contact your dealer for replacements. If the cartridges are beyond their warranty period, then buy a new cartridge.

    Where to buy new cartridges are looking for the date "install by" on the package. I would look for a package at least six months before the "install by", which would have had a year of remaining warranty.

    When to store unused cartridges for an extended period to keep them in a cool place and keep them trained as they would cling on a store display. This will give you maximum shelf life.

    Kind regards
    Bob Headrick, MS MVP printing/imaging

  • DeskJet 4535: Printer scans but does not print anything

    I was able to print documents from my PC so my laptop until suddenly now I am only able to scan and print nothing.

    Here are the things I've tried:

    -all types of trobleshoots

    -tried wired (usb) as well as the installation of the network printer, but the same two result

    -hp print scan n doctor

    -removed and added printer many times

    -uninstalled and installed the drivers several times

    -installed universal hp drivers, just in case it might work

    After all the above and many wasted hours yet the problem persists

    After doing print and scan the doctor I am able to print the test page but not able to print any pdf, files etc from any device.

    After a few hours on reseach I tried printing text from Notepad and it PRINTED, but I am not able to print pdf or word files. I even got a printed pdf file Foxit software & also of IE but its does not print from adobe acrobat or word or excel.

    Help, please

    found the solution... I had to run all software as "administor run" mode and it was like... what I did is go in the example of speech software installation folder, that I went to the folder of installation of microsoft and winword.exe found a click with the right button on it and went to Compatibility tab and check the option run in administrator mode. It is printed after that.

  • HP Deskjet 5400 says that it is not compatible with Windows 10

    I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

    You must use the built-in Windows 10 database driver.

  • Windows 95 version of Print Shop Deluxe is not compatible with Windows 7. If anyone can solve this?

    . Windows 7 64 bit printing problem

    I used the Windows 95 version of the Print Shop Deluxe on XP for years without problems, but now I just got a new laptop running Windows 7 (64 bit) and the CD will not download. Dialog box shows is not compatible. Anyone has any ideas, the update to download this CD please?

    Its unlikely that the PrintShop version designed for Windows 95 uses some 16-bit code that is not compatible with 64 bit versions of Windows 7.

    Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

    Run in Windows XP Mode requires:
    (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

    Windows XP Mode and Windows Virtual PC
    http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

    Windows XP Mode now accessible to more than PC
    http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

    Get started with Windows Virtual PC
    http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

    http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

    Windows 7 - upgrade Express features:
    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

Maybe you are looking for