HP Deskjet 3050 a does not connect to Internet

Currently have the printer on a wireless network with a static IP address.  Able to print from all computers and webscan is active.  I can't get Eprint and Web Services to work?  If you have any ideas or the questions more please let me know.

Information on the connection/network:

-WPA2 DSL - Verizon router-

-L' printer is on the network and seen by all computers - prints without any problem since each computer

-Software installed

Thank you

Duane

Well he got... And thanks to the support of HP cloud... Cole...

If you experience this problem... it

After you have configured the wireless on your printer:

-Go to the Web Page of the IP address of your printer.

-Under network information, where you set the IP address manually, enter the primary DNS server of 8.8.8.8 and 8.8.4.4 another DNS server.

-Power cycle your printer again.

-Reactivate web services.

Go to your print and connect to the internet and it will then print your Code and then go to EPRINT.

It worked for me. Once you have completed this assuming that you get the same results, go to EPRINT, and add your printer...

Tags: HP Printers

Similar Questions

  • iPhone 5s does not connect to internet unless its connected to wifi

    I have a 5 s IPhone it does not connect to internet unless I'm at home connected to wifi. I can not send imessages or browse the web what should I do?

    You did that mobile data is turned on in the settings/phone/cell data?

    Also, make sure that the apps you want to use for the cell data are enabled in the list below these settings.

  • New updates of Windows since 06/11/12 is originally Vista does not connect to Internet Explorer

    I have a desktop with Vista CAREB.  It has always worked well until about June 11, 2012.  Now it does not connect to Internet Explorer. It says it is connected to the internet and that has been verified by our server.  Tried everything and eventually restored it and no problem.  Then the next day, same thing and restored.  Next day same thing so I disabled all updates and no problem.  What new update windows made in the last few days which is the cause and what can I do?

    Thank you

    Hi Judy,.

    We cannot verify that Windows Update is causing the problem, I suggest to install the Windows updates one by one and make sure that Windows Update is causing the problem.

    Windows Update

  • I am able to connect to internet but when I switch to the amother user account it does not connect to internet

    on my computer, I am able to connect to internet but when I switch to the amother user account it does not connect to internet

    Hello

    1. Is there an error code or the message that if displayed when it is unable to connect to the Internet?
    2. You use a wired connection or wireless?
    3. You use the administrator account or standard account?
    4. All changes made to the computer before the show?
    Method 1:
    Check out the link and follow the steps.
    Method 2:
    Visit the link and try the troubleshooting provided steps.
    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  • HP Deskjet 3055 A does not connect to the WIFI with security

    I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

    First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

    My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

    I restarted my router and reset the printers wireless network using its integrated control panel.

    In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

    I tried both WPA Personal and WPA2 Personal, both with the same effect.

    For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

    After installing printers web interface WIFI, the problem is always the same and it does not connect.

    HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

    Concerning

    Ian

    After playing well, I managed to find a solution for this!

    For all users who are unable to find a solution by using the other methods, here's what to do.

    Change your local network to open the safe but note your WIFI settings for your default installation.

    Connect the printer to the open network the HP software (via USB cable)

    Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

    Click on 'Network', then click 'Advanced' on the left.

    Enter the network settings as they need to be secured.

    Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

    Turn on your wireless security, on your router and then the printer should connect!

    I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

    HP - feel free to thank me in this post!

  • HP Deskjet 2540: Printer does not connect

    Hello! I managed to connect my printer via the cord, but all my efforts to connect wireless have not been successful, even after you install the drivers appropriate for Windows 10. It seems to connect and to detect the router but when it promts me to enter information to check the connection, it does not connect. He also promts me to enter the information that is displayed on the printer, but it is not anything related to this wireless network. Help, please!

    Hi @paige101us and welcome to the Forums of HP!

    I see that you have connectivity problems.  I would like to help!

    I would recommend your computer off.  Once the computer is down, unplug the power cord from the printer and the electrical outlet and remove the power of your router for 60 seconds.

    After 60 seconds, reconnect the router.  Once the router has started broadcasting, reconnect the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    After that the printer is turned on, run the wireless configuration.

    I also suggest this document:

    Troubleshooting wireless printing Center

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • After that put 36.0.1 to date, does not connect to internet

    After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

    There is no error message when the update has been loaded.

    It is a terrible 'update '! How can I fix it?

    IQ140 said

    After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

    There is no error message when the update has been loaded.

    It is a terrible 'update '! How can I fix it?

    Update: I indeed found firewall was the issue (the first time with updates of Firefox). I tried uninstalling and reinstalling, but that no longer works.
    Then I opened the application window of Norton Security (looking for information of firewall). I don't actually change or click on what to Norton. I decided to try to install again. This time, when I hit "Run" instead of "Save", the small window Norton popped up saying downloading is safe. Then he installed and opens very well.

    It may be a quirk of Norton? Or by choosing run rather than save (and running after registration)?

  • iPhone connects to the wifi but does not connect to internet

    I have an iPhone running iOS 9.3.2 6s (last updated).

    The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

    This also happens with my daughter 5s iPhone and iPad for my son.

    Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

    We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

    I tried to go into my phone settings and reset the network.  Always problems.

    It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

  • HP Pavilion dv7 - 3188cl: HP Pavilion does not connect to Internet (resolved)

    I recently got a HP Pavillion Entertainment, model number dv7 - 3188cl, for me to use for a class at the school by my uncle. Before the recovery, everything worked perfectly well. My uncle asked me to reset the computer, so we used the recovery disks that wiped the hard drive successfully but then refuses to reinstall the operating system. Instead of getting another set of recovery disks that I've used a Windows 7 install disc to reinstall the OS and he did so successfully with one flaw, the laptop does not connect to the internet.

    I tried to connect via ethernet and it does not find my WiFi network. I suspect his lack a driver and checked for drivers on the HP site but he said that there is none. Any advice would be greatly appreciated, and if there is no driver for this I would be grateful if you could tell me where to download from.

    Thanks in advance.

    Update: after some search Intel had the good driver needed.

    All your Windows 7 drivers (and some) are displayed on your Support page:

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-3100-entertainment-notebook-PC-series/4074368/model/4150173#Z7_3054ICK0K8UDA0AQC11TA930O2

  • Firefox starts in offline mode work and does not connect to internet

    Firefox disconnects randomly internet. Work off line option is checked then when somehow naked - Firefox still does not connect. A re-start the computer him more often, solved the problem. What is new and I did not any changes recently. Running Fox 3.6.3

    Try going to Tools - Addons - Extensions and disable your extensions one by one to see if one of them is at the origin of the problem.

  • Satellite L350 - does not connect to internet

    Hiya all

    Had the laptop about 3 months now and still connected fine to my wireless internet. But recently he has stopped to connect to wireless internet.
    I can't find my wifi connection, but it does not connect to it. My parents have the same laptop, purchased at the same time and can use it on the same wifi with no problems.
    My sister has also no problems to connect to my wifi on his cell phone, neither does my Xbox 360 or my iPod Touch.
    I can connect my laptop directly via ethernet to the router, but it's not ideal for me, and also I couldn't find automatic updates to download.

    Can someone help me with this please?

    Thank you very much!
    Ethan

    I agree with Akuma.
    Try to update the things said Akuma.

    Visit the Toshiba for the BIOS and driver update WLAN:
    http://EU.computers.Toshiba-Europe.com => support download & => download drivers

    The firmware on the router, you can find on the site of the factory.

    Good luck!

  • iPhone and iPad does not connect to internet

    Hello

    Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

    I think it must be something with the update iOS because:

    -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

    -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

    -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

    I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?


    I really appreciate your help!

    If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

    Try this:

    Restart your router (unplug unit, wait ten seconds and then reconnect it).

    Wait for the router shows all lights normal and connected.

    Now, reboot your iPad or iPhone

  • Equium M50-164 does not connect to internet

    I bought this laptop 3 months ago, and the wireless internet worked well. Now all of a sudden, it does not connect to wireless internet, so that the pc downstairs. It will not connect also if I connect to the router directly, or even through your phone line ADSL modem.

    Any ideas on how to solve this problem?

    Hello

    Please check device manager if the card network and wireless card are recognized correctly.
    You have installed any 3rd software or have you changed something? Did you get any error messages? Please post more information.

    Good bye

  • Samsung Blue Ray does not connect to internet, but being of other devices.

    I used this Blue Ray Samsung drive with this router for over a year without problems. A few days ago I set up parental controls, by downloading the Netgear Genie app on my PC from Windows desktop, on the router, and now Blue Ray does not connect to the internet. However it connects to the router fine. I have 2 phones Andoriod, 1 tablet of Andoriod, a WII Game Console and your Windows desktop that all connect to the router and the internet very well. I tried shut down the drive several times over 2 days and has been turned off at night twice. I deleted and re - establish the creation of a Wi - Fi connection on the player. I even updated the router. and off the Parental control. all this without any success. The DNS and IP are obtained automatically by the player. Any ideas?

    Hi bldroge,

    Here's how you reset the router.

    http://KB.NETGEAR.com/app/answers/detail/A_ID/9665/related/1

  • BDP-S570 - does not connect to internet via wifi

    I just bought this today and it does not connect to the internet via wi - fi. I'm entering properly (my iphone, ipad and computers connect very well). I called tech support and they had no idea what either. I then connected with an ethernet cable, updated to the latest firmware and tried again with no luck. Does anyone have any suggestions? It shows that the wireless is OK, but Internet Access - failed. When I return to the guests and have it analyzed the available networks, it shows that I am connected... something is weird. I'm back if I can't make it work in the next day or so.

    Network problems can certainly be difficult to diagnose.
    Here are some useful steps to check where your problem is.

    Check the IP address: is it 192.168.x.xx? or 169.xxx.x.xx
    If you have an address 169 it is a fake connect.

    What kind of network do you have? It's a Modem/Router combo? This is a modem connected to a router and then your Blu - ray player.

    the router/Modem combos are more complicated, and you need to consult your provider of Internet services (ISP) to connect to help. (maybe a MAC filtering problem?)

    If you have a problem with your Modem/Router try get a router and connect to the modem, you can have the best success with a stand-alone router you will have with a handset as they are less complicated to use.
    If you already use a stand alone, try to temporarily disable your security and test it without warranty.

    is the firmware updated on your router (not the S70 but the router) the latest firmware is sometimes useful.

    Best regards
    Kimberly

Maybe you are looking for