HP deskjet 3050 a series: during the analysis of my printer HP Deskjet 3050 a I get the COMPUTER NOT FPUND message on my printer

When I scan from my HP deskjet 3050 printer has series, I get a message on my computer printer not found. If I connect the printer on my computer I can scan from the printer. Scan doctor tells me that there is nothing wrong with my printer.

Hi @eightysecond,

Welcome to the HP Forums!

I understand that you cannot scan to the computer of your HP Deskjet 3050 a on Windows 7. I'm happy to discuss this issue scan for you!

Please take a look through this guide, a "computer not found," "No computer detected," or "connection error" message for HP Deskjet 3050 has e-all-in-One Printer Series.

Hope this guide to solve your problem and have a nice day!

Tags: HP Printers

Similar Questions

  • During the transmission of a message, it is surrounded of how red lines I elinmate them

    During the transmission of a message, it is still blocked with red lines around the message and title. I've never had this happen with other programs such as Windows Live Mail, hope you can help eliminate this very annoying problem.
    Thank you.

    Ignore them. They are the attempt of Thunderbird to help you navigate through complex systems of images, often resulting in multiple shipments. They allow you to decide exactly here where in a message you insert new. I sometimes try to flatten the content by removing unnecessary nested frames, but it is generally not worth the effort.

    Send a copy of this message to yourself and you will see that they are invisible to the recipient - until it is re-released in Thunderbird.

  • How to permanently remove contact name/email address during the transmission of a message on the internet

    e-mail addresses are incorrect on the contacts list - during the transmission of a message on the internet.  How to remove these e-mail addresses and insert the good?

    Hi WilliamSpence,

    ·         Are you referring to Windows XP "address book"?

    ·         What email program are you using?

    ·         What is the email service provider?

    If you use Outlook or Outlook Express, then you can follow the Microsoft Knowledge Base article mentioned below and check.

     

    HOW to: Add and remove names in your address book in Windows XP

    http://support.Microsoft.com/kb/307730

    Let us know if that helps.

  • How to change the resolution of the screen when the "input not supported" message after reboot

    I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
    the problem is,
    the "input not supported" message when I reboot the PC and does not allow me to do anything.
    He presents himself before the logon prompt.
    I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
    He returns to the State ("input not supported" and no prompt connection) after I restart the PC

    Mark,
    Thank you for your help,
    I tried in vain,
    I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

    Kind regards

    Claudio.

  • I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a "file not found messages

    I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.»  How can I go back in my files?

    There are a number of options available when you choose to import files to your catalog in Lightroom (library)

    1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.

    2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)

    3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.

    The original image file will be located at the location of your choice.

    There are no image files in your catalog (or library) file the original files are in the location you choose.

    If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.

  • During the reinstallation of XP, message "Please wait" frozen and inactive computer

    Recently, I tried to reinstall Windows XP SP2 from an installation disc that came with my computer. Before reinstallation, it was under XP SP3.

    He went through the installation process. It appeared that the installation is complete. It restarted (for the second time during the installation) and engaged in the usual Windows XP loading screen and now froze on a similar screen that displays the message "Please wait" instead of the loading bar. I waited for several hours, and the screen has not changed. The computer makes no noise and doesn't seem to be something.

    What should I do?

    Hello

    ·        You are able to boot into safe mode without any problem?

    ·        Did you do a fresh install with formatting or without formatting the hard drive?

    Method 1:

    I suggest you to disconnect all external peripheral devices that are connected on the system such as (printers, scanners, etc.) and check if you are able to boot to the desktop.

    Method 2:

    Step 1:

    I suggest to start in safe mode and check. Follow the steps mentioned below.

    a. restart the computer and keep tapping F8 until you reach the start menu.

    b. Select the startup options safe mode and press to enter.

    If you are able to boot into safe mode without any problems then, it might be a problem with the graphics card drivers that are installed on the system. I suggest to disable the video card drivers from the start in safe mode and then try to boot to the desktop and check.

    Step 2:

    To turn off the graphics card driver, follow the steps mentioned below.

    a. click on Start menu and click Control Panel.

    b. click System and click the Hardware tab.

    c. click the Device Manager button and right-click on the graphics card driver that is present.

    d. click on uninstall and then try to boot to the desktop and check.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Scan from the computer, not the Printer Wizard

    I reinstalled the drivers for full features. I can't use the printer to scan to my office, I am only able to use the Printer Wizard. I was able to scan like this before and for some reason any during the last six months, I can't do it from the printer. It's annoying not to have two options.

    Hi @AnneO57,

    Thanks for the reply. I understand that it will be a lot of time. I don't think that the printer is the cause. To test the feature, you are able to make a copy? If so, the problem is corruption in the computer as a suspect. If all else fails, you should be able to go back using the HP9800 driver for printing.

    Use this message as a guideline:

    Posted by my colleague @Shane_R.

    Please post back with the results. Good luck!

  • After you configure multiple users on the computer, not all accounts have access to all programs

    I have "cut" my computer so that there are currently 3 users, each with their own space programmes. The computer has always had Microsoft Office on it, and Word was part of the office. Two users have no word at their disposal, while the third user access to Word. How to do the first two Word users access. They are able to access other programs that are in the office.

    Hi Tom.Wi,


    1. are you able to access the other office applications two user accounts?
    2. have you selected the option to use the program for all users during installation of the Office program?

    Method 1:
    Try reinstalling the program by selecting the option to provide access to all user accounts.

     

    Method 2:
    If the problem persists, you can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

    Create a new user account-
    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

     

    I hope this helps.

  • The power button will not turn on my computer. Is there a way to solve this problem, or the computer not sleep once I do back on?

    I have a MacBook Pro 2011.

    The power button does not turn the computer on when the computer goes to black screen.

    The battery he is

    iI tried to Community assistance to research and tried to wait. The next morning, I was able to turn it back on. Now, it happened again.

    Please help me. I can afford a new Mac.

    Thank you

    Get it fixed. Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.

  • Stop the 'Server not found' messages where ads used to be.

    Installed Hostsman and get now 'server not found' and other details where all the ads used to be on the web pages.
    A way to stop the messages?
    Thank you

    You can check on the support site Hostsman.

  • The SERVER NOT FOUND message constantly makes me nut

    Please help me, I've been with this issue for almost a year. I always get the server not found error and have to hit refresh time evey to load the page. It happens randomly, I noticed there are hundreds of people with the same question. I have found no resolution online. Help, please.

    Hello. You are using an old, obsolete, obsolete and unsupported in version of Firefox. Please make a update of Firefox 10 and check

  • All-in-one OfficeJet 8600: printer to the computer scan error message

    Hello

    I'm on Windows 10 and have updated my HP drivers and I have NOT of PROBLEMS I scan a document to my computer.

    But I get, every so often, a message background - black disaster mistake, bright yellow triangle - who says my priner can not scan to my computer. There is no HP identifier on the message.

    It seems that some malware that missed Bitdefender. Any ideas on whereI can find and eliminate?

    Thank you

    Greg

    Valdavidian

    It is a mistake on the part of Windows. He thinks that the printer has lost the connection, when in fact, the connection is always ther.

    I have networked printers at home, and I usually see this message once a day.

    When I then click on the desktop icon to check the problem, the routine is able to communicate with the printer without any problems.

    My printers are connected by a cable to a switch ethernet, so I KNOW that the connection has not been ignored.

    It doesn't seem to be a way to STOP Windows generates this message.

  • burning a cd restores only on the computer not in the cd drive

    When I burn a cd using a cd rw it only reads on the computer.  What can I do to make the drive work in our cd and my car player.

    Hello

    Use the mastered Format to burn the discs, so you can read about other players. Even their use
    in a car drive. Sometimes the CD - RW can be tricky and a CD + or - R works better.

    Burn a CD or DVD in Windows Media Player: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    Burned CD does not not in car CD player
    http://www.andybrain.com/archive/MB/burned_cd_in_car_player.htm

    Why the CD player in my car does not play the CD that I burn?
    http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0091.mspx#EKF

    Check with the experts here
    http://Club.myce.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I forgot where to go to change the colors of the computer, not the appearance and customize other adjustment helps E-mail _ @_. _ Thank you, dale

    I thought I'd go to the computer right click was a way to choose the background, link, text colors. What I'm facing, is go to help and support (microsoft) and a part of the text is missing. I'm sure that 99% of the people out there know the answer, I'm a model, thanks for the help-dale

    Hello

    I suggest you follow the link and check.

    Change the colors on your computer

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-colors-on-your-computer

    See also:

    Personalize your computer

    http://Windows.Microsoft.com/en-us/Windows-Vista/personalize-your-computer

  • I just got a Dell Dimension 2400, used and all series of the computer in Korean. I need to change it to English.Will have to do with symbols, can anyone help?

    I tried earlier to do with symbols, but was wrong, somewhere, I went on board and got to the world but couldn't do anything with it. Need someone to tell me what symbols and everything after that I get in Control Panel

    http://www.brighthub.com/computing/Windows-platform/articles/46362.aspx

    read this article, however, if you have the authentic installation CD you better reinstall xp properly like you do not know what is installed or going into a used pc.

Maybe you are looking for