HP DeskJet 3050 a"the printer and the computer are connected to different routers"

Similar Questions

• Why can't I make my Deskjet 3050 to the default printer

  Why can't I make my Deskjet 3050 to the default printer?

  OS windows 7 home 64 bit.

  Repeat the previous printer is default but I uninstalled

  Hi lions99 just to update your printer sorted now something to do with the connection to the router / laptop and printer, all a bit above my head when he was explaining to me, he needed all the info from router to set up because he did not find it automatically.
  Kind of sorted now thank you again for your much appreciated efforts.

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• How to scan a document HP MFP127fn for my Ipad Air2 (the two are connected to my home network)

  Hi, how to scan a document HP MFP127fn for my Ipad Air2?

  The two are connected to my home network - the HP printer is connected by ethernet cable, and the Air2 Ipad connected by WiFi.

  I can print from the Ipad to the printer but cannot scan.

  The printer is properly connected (IE, it scans to another laptop (windows 7) without problems)

  Hi @regtown,

  My bad

  Looks like you won't be able to scan to PC or Mac with this printer. HP ePrint app is certainly compatible via iOS for printing, but it won't help you analyze for iPad.

  Kind regards

• My computer is a HP Pavilion slimline and my printer is a Dell 968. I can't print from my computer, are these compatible?

  My computer is a HP Pavilion slimline and my printer is a Dell 968.  I can't print from my computer, are these compatible?

  Hello

  ·         What happens when you try to print?

  ·         You get an error message or code?

  Your Dell 968 printer is compatible with Windows 7, check out the link:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Dell%20Printer%20968%20

  Method 1:

  Try to install the latest driver on the Dell site and check if it helps:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R241825&SystemID=PRN_ALL_A968&servicetag=&os=WV64&osl=en&deviceid=15344&devlib=0&typecnt=0&vercnt=2&catid=-1&impid=-1&formatcnt=0&libid=40&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=349071

  Method 2:

  Follow the steps in troubleshooting section and check if that helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Why my ink on my printer and my computer ink level report do not match?

  Why my ink on my printer and my computer ink level report do not match?

  ink level?

  Hello

  You should check their documentation online with the help of the manufacturer of the printer, and
  drivers and ask in their forums (if any). The OEM printer manufacturer is responsible for
  the functioning of the printer and their supplied drivers and other software.

  It is not a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• MacBook randomly landed volume when the headphones are connected.

  Hey,.

  There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

  My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

  Please try resetting the memory NVRAM and SMC.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• our administrator user on the computer just connect.

  our administrator user on the computer just connect.
  whenever I click on it (it does not require a password) it tells me I can't log on because the user didn't load, I know not what to do or how to fix it...
  Please help me :(

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• My battery icon is flashing blue to Orange quickly even if the computer is connected to the power supply

  Battery problem

  Dear friends,

  My battery icon is flashing blue to Orange quickly even if the computer is connected to Power.What mean?

  This means that my battery is dead and not load? If Yes... will be the work of the computer until I repalce the battery? And is it safe to use the computer in this mode?

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• When the computer is connected to the TV, computer screen turns off

  When the computer is connected to the tv (cable 15) the monitor of the computer turns off. the only photo is on the tv screen. I have no idea what happened to cause this

  * original title - tv monitor__ *.

  Hi rwertheim,

  Please see the following articles with additional information and troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  and:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• USB MTP driver fail when the computer is connected to the domain

  Hello

  Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer= http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http: //social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/

  Please note that the cause of the problem is already, I don't want no information on reg-patches and such.

  After connect us any computer to our area, the PnP for cameras (eg. iPhone) does not work.

  Tested on several models with the same result, always work before the computer is connected to the domain.

  I can't find any setting in our group strategy which must affect installation.

  You can find the log files from the same computer, created during the installation of the MTP (with an iPhone)

  https://anonfiles.com/file/9bf2a47c44cdb2f589d544924c6ffd2b

  MTP_domain.log has been created on a clean Windows 7 64 bits connected to our domain

  MTP_no.domain.log was created on a Windows 7 64-bit clean

  Hello
   
  Unfortunately, the question you posted would be better suited in the TechNet Forums. I would recommend posting your request again in the TechNet Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   

• HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

  Dear all,

  I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

  My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

  Word or PDF documents (for example) are always printed in black and white - even if they are in color.

  Copy of pages in color on my printer is not a problem.

  This works perfectly well. The printer is connected to my PC via USB.

  Cartridges (color and black and white) are practically new and original HP cartridges.

  Could the problem be associated I could have changed by accident print settings.

  Thanks in advance for your advice.

  Cheticamp

  Hi Cheticamp,

  In controlling panrl → devices and printers.
  Right-click on the printer and select Printing Preferences.
  Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

  From within Word, click file > print and click settings.
  You will see the screen Lady printing preferences.
  Press Advanced Options and check the optio grayscale is set as off for Word as well.

  Hope that helps,
  Shlomi

• DeskJet 3050 has J611: printer interrupts the headers and footers

  Hello

  When I print my documents, the printer cuts the headers and footers. I use Microsoft Word 2013 and have checked to make sure that the margins are narrow as Tess in Word, but the printer cuts my headers and footers. An error message appears that reads the document is out of print areas. This is a mistake with my printer, and if so, what is the solution? Thank you very much.

  @jun_per

  The specifications have not any information on restrictions "margins".  In general, the high margins and the size may be restricted a.11 inches, while (for some printers / paper) the background may etre.5 inches.

  IF the printer like / limit top / bottom margin a.5 inches, so that the word 'Narrow' margin setting may be in conflict with the ability of the printer to print the document.

  Maybe you can change the margins of the document 'Normal' or something similar.

  You can also adjust the settings individually.

  Word Document > file > Print > click on layout > layout tab

  Check to see where your headers and footers are defined compared to the whole "Narrow margin" setting.

  You can adjust the header and footers downwards / upwards away from the title of the document / paper edge.

  Example:

  Word Document > Insert > footer (drop down menu) >

  (look at the bottom of the parameters available footer) Change the footer > adjust as you wish

  General help, suggestions and examples:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.