HP Deskjet 3050 has e-all-in-one: impossible to download drivers and software Web site

I have seen this problem posted a few more times, it seems that it is recurring.

I reinstalled Win7 on my machine.  I try to reinstall the driver and software for my all in one.  I get ' HP is compile your results. " It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. ' message for more than 10 minutes now with only the busy indicator.  I tried this on Chrome and IE with the same results.  Help.  I need my scanner.

The pilot site is always questions, but you can download the driver Windows 7 x 64 for the HP Deskjet 3050 a directly from the link here:

http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

Tags: HP Printers

Similar Questions

  • DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

    My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

    I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

    Help?

    Hey @benjaminllim,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Turn the printer off:
    2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
    3. When the lights come back on the router, turn on the printer.
    4. Disable any antivirus, firewall or security of your Mac software.
    5. Try to run the installer.

    Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Destjet HP 3050 has j611 all-in-one series does not not on windows 8

    I got Hp Deskjet 3050 a j611 all-in-one series on my windows 7, I've upgraded to Windows 8 and my printer did not work properly so I uninstalled so I could reinstall it, but it will not install because it says that it is not compatible. is it possible that I can make this printer work using Windows 8?

    Hey kelyka1,

    I guess you are trying to reinstall with the CD supplied with the printer.  Click on the link below to access the download page for the driver for Windows 8 for the Deskjet 3050 a J611.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5061082&sw_lang=

    I hope this helps.

  • HP Deskjet 3050 a: HP all-in - one Printer Installation remotely

    How can I download and install the remote HP all-in-One Printer software without going through the MS Store?  He wants to put me in place and MS Account and put all my files, etc. on a site not on my computer.  I don't want to do that.

    @Johanned

    http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

    REO

  • Cannot install driver for HP DESKJET 3050 a j611 all-in-one using windows 7

    Stagnate in the printer, but can not find a driver. Have tried to set as the default printer, but right click I only get CREATE-HELP-DELETE SHORTCUT-PROPERTIES of the DEVICE can someone help as HP are useless

    You don't install it correctly, but just pluged in there.

    It must have taken all of 10 seconds to locate your model on the site of HP

    You install using the cd of HP, or the full functionality of the HP site download and does not connect until the installation says to

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=5061092

  • HP 3050 has J611b (all-in-one)

    Is the foregoing allows scanning with the ADF?

    If so, how to enable it? I use a Mac OS X 10.6.8

    Hello

    This may be possible from the software, but I'm not to known mac software (im a boy of windows), but as far as I can see you need to parse from the software, when asked to choose to scan another page and when, select Save. It will ask you what type of file and when you select a file type that supports multiple pages as PDF them should be available to select a checkbox "save all items in a single file.

  • HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

    At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

    Have research all day but unable to know what means this error code.

    Hi @e-year-e.

    Thanks for joining the Forums of HP Support for a solution to your printer problem.

    I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

    These error codes are caused by hardware or firmware issues.

    "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • How to replace ink cartridges hp deskjets 3050 has

    need to replace printers inkjet on hp deskjet 3050

    (new forum HP)

    Welcome to the forum, Griff.

    Your printer has its own website pages - in the section "Troubleshooting > How To ', come the instructions to change the cartridges:

    HP Deskjet 3050 has e-All-in-One Printer - cartridges

    The document includes a video to explain the procedure.

  • Printer HP 3050 J610 series all in one will not print any documents

    I'm on Windows 7 Service pack 1 and I have a HP Deskjet 3050 J610 Series All - In - One Printer.it is not wireless I use a USB port for printing.   I have problems printing pdf files as well as Word documents.  I uninstalled and reinstalled the software and drivers; I have restarted my computer several times; I tried the scan doctor and he says everything is fine.  It prints the test pages.  When I press the icon of the printer, it will save the file even if the file is saved to alread. I'm going to planet and save the file again.  I noticed that, for files, it says printer and no .doc or .pdF files.  He also says that it is offline.  I tried the steps recommended for this suggestion has as well and still have problems printing.  The I am trying to print the files aren't new documents except one which is a pdf file.  I hope you can help me.  The window pop up that appears just before printing a 0% for printing.  I hope that makes sense.

    Thank you.

    Maria Holloway

    HI Maria, welcome to the forums

    I noticed your post about the problem you are having with your Deskjet 3050, printing via a USB with Windows 7. I have some suggestions that I would like to offer that can help!

    Perform a clean boot and make sure that your firewall is disabled: Disabling and Re-enabling your software firewall in Windows.

    By this stage and test print while the start up programs and the firewall is disabled, it will show if the mobility programmes have been the origin of the problem.

    Now try to print a document as one. PDF or. DOC.

    If it does not, as a workaround option, try to save documents that you have an impression of question as a different file (do not use in .doc or .pdf format) type.

    Open Word or Adobe and print a blank page (without saving the document) to see if you have a problem with printing.

    Please let me know the results, I hope that my information helped!

    Have a great Wednesday

  • HP Deskjet 3050 has All - in - One J610 series is not compatible with mac os x 10.8 mountain lion. need help.

    Hi I have a HP Deskjet 3050 all-in-One J610 Series a as indicated in the title, and I have the operating system Mac OS x 10.8 Mountain Lion. I need help to get or install the software hp for printing wireless setup in my dorm. Any help is very appreciated.

    Hello

    I'm not not clear with your exact printer model, it is the printer Deskjet 3050 a (J611) or model 3050 (J610) ?

    For the Deskjet 3050 J610- a complete software not available at this time.

    As there is no comprehensive software available for Mountain Lion, you will need to set up a temporary ad hoc connection and then use the EWS printer to connect the printer to your router.

    • Press the button on the control panel wireless to display the options menu on the screen of the printer wireless.
    • Select on the screen of the printer's wireless settings, then Netowrk default settings.
    • Under the same wireless and select Radio wireless and make sure to put it on.
    • From your Mac, click the WiFi icon and then click on join another network.
    • Click view networks, select the printer SSID, it will include 3050 or J610 in its name, then click on join.
    • Allow 2-3 minutes to establish the connection.
    • Open Safari and click on the favorite icon ().
    • Hello-click and then click on the name of the printer, the EWS page appears.
    • Enter the network tab.
    • Less wireless (802.11) click Wireless Setup Wizard and then click Start the wizard and follow the steps on the screen to configure the wireless connection.
      Note: If you must provide the type of security for your wireless network, you can click the WiFi icon, click Network Preferences and select the Wi - Fi network. Click Advanced, and you will find the type of security for your network in the Wi - Fi tab.
    • Once the wizard of wireless via the integrated Web server configuration is complete, click the Wi - Fi of your Mac and you connect to your router again.

    Finally, go to System Preferences > print & Scan and add the printer. confirm all calls to get the drivers from Apple servers

    For the Deskjet 3050 has (J611), be sure to connect the printer with a USB port and follow the installation below:
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&cc=us&DLC=en&LC=en&OS=219&product=5061082&sw_lang=

    Please let me know of any problems,

    Shlomi

  • Why can not install HP DESKJET 3050 has in a series of J611 on my new computor windows 8

    What can I do to make my existing HP DESKJET 3050 has all in one printer to work on my new computer windows J611 series 8 when I put in the disk says it is not compatible in some way?

    Get the updated drivers from HP for Win8:
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5298986&sw_lang=>

    As with all HP printers, the software must be installed before connecting the printer. Installation will then ask you to connect via USB. If you have installed all previous versions, uninstall them first.

    I have this same AIO, and new long pilots work fine.

    SC Tom

  • HP Deskjet 3052 a e-all-in-one: update the printer software

    I have I already know the answer to this question, but I'll ask anyway.  I have a printer HP Deskjet 3052 J611G e-all-in-one has.  My computer is running Windows 7 Home Premium.   I want to upgrade to Windows 10, but the printer I have is not compatible.  I look for updated software for the printer but can't find anything whatsoever.  Is it possible to upgrade my printer software or am I condemned to buy a new printer?

    Thank you for your time

    Spoiler (Highlight to read)

     
     

    Hello

    Your printer is compatible with Windows 10. the drivers can be downloaded from this link:

    http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J6/4311836/model/5061072

    Don't forget to click on the button to change, and then select Windows 10 in the selection of the BONE at the top.

    Shlomi

  • HP 3050 j610 printer all in one

    I have a hp 3050 j610 printer all in one, the scanner scans without problem, but it will not be printed. I have this printer set in place on a wireless connection, can someone help me with this problem.

    What operating system do you use?

    HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

    I would like to know what are the errors you receive?

    http://goo.GL/3DAkq

  • DeskJet 3050 has: Scan Options window

    Hello

    I have the DeskJet 3050 a printer and when I scan something it automatically scans in JPEG format. As I want to change my scans, I downloaded and installed the OCR software (I followed the instructions posted on the support forum HP, installation of the software for the HP Pro 8500 printer A910n JO). After you install this software, however, I can't find a scan window that allows me to choose the format for the scan options I'm about to do -: in other words, I don't have a window which now allows me to choose the RTF rather than JPEG. Do you know where I can find it?

    (the instructions given on the Support forum for this step are: 4) now open the HP Deskjet 3050 scan window. Select "Scan" everyday and in the dropdown for "Type", select "Rich TEXT" or «indexable PDF»

    (My problem is that I can't find the window of scanning HP DeskJet 3050 - and constantly scans automatically to JPEG format)

    Thank you

    First of all, you must have the drivers and software HP Deskjet full functionality installed.  The scanning software provided with the HP Deskjet 3050 does NOT include OCR capabilities.  However, the HP OfficeJet Pro 8500 a A910n printer come with OCR capabilities.  Thus, the installation of the software and driver for the OfficeJet included installing the OCR package that can be used by the HP Deskjet 3050 HP scanning software and the product HP OfficeJet.

    The HP scanning software are accessible in several ways:

    • #1 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Scan
    • #2 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Deskjet 3050...
    • Method #3 - Windws 7 Office: find HP Deskjet 3050 desktop icon; If it is present, run (double-click on).

    Method #2 and #3 will launch the Desktop Client software. Under the analysis section, choose 'Analyze a photo document' to launch the HP scanning software.

    • Method #4: Navigate to C:\Program Files (x 86) \HP\HP Deskjet 3050\bin; Run Scan.exe HP (double click).  (Note: the C: drive is the default installation drive, change accordingly if you have installed the software on a drive by default.)

    In the HP scanning software, you should see a number of shortcuts named Scan on the left panel of the dialog box.  Select the Scan shortcut named 'Scan' every day and change type of file to RTF settings in the right pane of the dialog box.  You can also create your own Scan shortcuts and configure the settings for scanning for this Scan shortcut to your liking, including the file type.

    Click on 'accept as Solution' if it has solved your problem, while others may find it.
    Although I am an employee of HP, I speak for myself and not for HP

    Give Kudos to say 'Thank you' by clicking the 'PLoP icon '.

  • HP Deskjet 3050 has j611a

    I have problems connecting my printer to my Imac. My printer is connected to the network fine as did that via WPS, but when I click on add printers in the settings on the Imac it does not show in nearby printers and I find just not. Can anyone help?

    Hi hawka2610,

    Welcome to the Forums of HP's Support.  I understand that you want to know how to print from iMac to your Deskjet 3050 printer.

    I have included installing the document printing software for a wireless network connection . It has a section devoted to the different operating systems.  Click on the version of Mac OS X you are using.  It will guide you through the download and installation of the printer software and connect to the printer.

Maybe you are looking for