HP Deskjet 3050 J610: HP Deskjet 3050 J610 will not scan

Similar Questions

• HP DeskJet 3050 J610 will not scan.

  OS: Vista 32-bit

  Error message: "error analysis. try to scan from the computer:

  No changes made to the system.  Was analysis correctly.

  When I try to scan from computer, trying to open HP DeskJet 3050 J610 series scanner icon on the desktop, does not open.

  Hello kkina6bz

  I have a few questions to help troubleshooting:

  • How your printer is connected?
  • The icon on the Desktop gives / error message or is it opens at all?
  • You have another computer, you can try scanning from? It would be one of the easiest ways to identify the problem.
  • Have you tried reinstalling the printer software?
  • Have you tried to run printing HP and doctor Scan? If this isn't the case, it is a diagnostic utility that can sometimes find the problems of scanning. HP Print and Scan Doctor

  I suggest following the procedure described in the article below. The article contains several possible solutions to correct the mistakes of scan from the control panel of the printer.

  A "connection error" or "No computer has detected" Error Message appears when you try to Scan from the printer control panel

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.

• DeskJet 4500 will not scan to PDF

  My Deskjet 4500 G510g-m will not scan to PDF. The Solution Center does not show a scanning pane. Printing HP and Scan Doctor indicates that an update is required for the Cener Solution, however, the update link goes to an update to the Pro 8500 and the update will not be installed for this printer. The software has been installed from download the latest driver from the Web site. Uninstalled several times, including from the file bat of the cd. Printer is connected by USB to a Windows 7-64 bit computer.

  Hi spmekr,

  Welcome to the HP Forums!

  I noticed that your HP Officejet 4500 will not scan to PDF on Windows 7, and I am happy to help you with this problem of scanning!

  I recommend the following solutions:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Re-install using the printer HP install wizard for Windows.

  I hope this helps and thanks for posting!

• 3545e DeskJet: 3545e deskjet will not scan through usb or wireless. Driver error

  My deskjet all in a single 3545e has stopped scanning.  I get the following error page when you try to scan:

  

  I ran the tool Dr. and received the following message:

  

  I did as suggested, but it made no difference.  I then checked the usb cord, but it seems to work very well.  So I uninstalled and reinstalled the printer, but I still have the same error messages.

  What can I do?  It of the fine print but will not scan...

  Thanks in advance for any help you can provide.

  Hi @bhjat,

  It may be a good idea to test the ability of computers to analyze. Try using one of the following methods to scan;

  Fax and scanning the Windows Instructions

  1. Place the item you want to scan on the scanner glass, or load in the ADF (ADF) documents, if your printer has one.

• DeskJet 3526 will not scan

  Your Question: Deskjet 3526 will not - scan scan doctor says driver is not installed, but I used the disc that came with the scanner, so I don't understand why the driver is not installed.    Is also not connected to the internet for printine distance.

  It says on the outside of the box of series 3526, the unit itself said 3526, but the disc that came with it said 3520.

  You can contact the Support of HP (1800-474-6836) If you want to get a CD directly.

• HP Deskjet F2210 printer will not print my documents with the exception of my e-mail highlighted

  HP Deskjet F2210 printer will not print my documents with the exception of my e-mail address highlighted who is on the document, it is not cartrages, as it will print one page black and multicolor of the internet. Help, please.

  If you found problems with print quality with the only printer without printing from the computer, then it is a hardware problem.

  You may need to contact HP (1800-474-6836) support. Looks like a print head may be bad or needs to be cleaned manually. I don't think that this printer has a detachable printhead to clean manually.

• Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 Win Server

  Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 server running Window server 2003 Enterprise edition SP2. I have loaded driver 990c and it works, but the side two the 6122 print function will not work with 990c. Is there any solution for this?

  I'm afraid that there is no specific driver for this OS. The 990c driver will be the only option to get to work. I'm sorry.

• 3050 J610: 3050 J610 does not scan after Win 10 update

  After printing upgrade Windows 10 but the scan with error saying The HP DeskJet 3050 J610 is not found. Have you tried diagnostic and scan fix - it finds the scanner ok. Installing the new application that displays a general error.

  Any ideas how to fix it please.

  Hello

  Please try the steps below...

  1. Uninstall the printer from programs & features
  2. Restart the PC
  3. Please, download and run the Installer printer HP www.hp.com/go/tools

• HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista

  HP Deskjet 1056 will not install on Windows Vista

  Hello

  Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&

• Advantage of ink HP Deskjet 1515: print but not scan

  Hello world

  I am using HP Deskjet Ink 1515 advantage and when I am trying to scan a page or a picture, shows the following error: the HP Deskjet series 1510 was not found. This is something that has happened today and never before.
  Although the error shows that the device is not found, I can normally print with it.

  I would appreciate all the advice really.

  Thanks in advance.

  Hey there,
  Try the next step, I believe that this will help you overcome the problem.
  1. start by dissconnecting the USB cable.
  2 remove the printer driver of "devices and printer" which is located in Control Panel.
  3. Download this file (http://ftp.hp.com/pub/softlib/software12/COL48430/al-117537-4/DJ1510_188.exe) which is the solution complete for the HP Dj 1515 series.
  4. extract the contents of the file.
  5 open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called 'RemovePreInstalledDrivers' > once you open this file black screen opens, wait for it to close, then move to the next step.
  6. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  7. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
  8 follow the steps for you, and connect the USB cable when prompted to.

  Who should add the scanner to your imaging devices.
  Best Of luck ~

• DeskJet 3510 will not scan wireless on OS 10.9

  I have a 3510 Deskjet which worked fine wirelessly on my old Mac with Snow Leopard. I recently bought a new IMac with OS Mavericks 10.9.5. The printer will print wireless but not scan wireless. It will scan only with the attached USB cable. I uninstalled and reinstalled the latest version of the HP software. When I disconnect the USB it is said that the wireless connection cannot be found. I have reset the wireless connection, and it's good. What I'm missing here?

  Hey @hellis,

  Welcome to the Forums of HP Support!

  I would like to help you today with the resolution of the scanning wireless problem you encounter on your Mac OS X 10.9.5 operating system with your HP Deskjet 3510 e-all-in-one printer. I understand that you have already uninstalled and reinstalled and tested via USB cable without success. Right now I'm going to guide you through some additional troubleshooting for this problem to scan wireless.

  Step 1: Uninstall the drivers and software:

  First of all, I will have you reset the printing system on your Mac computer. This will remove any printer of your printed folder and Scan, but does not uninstall printers. You must use other printers once the reset complete simply click on the (+) sign more to add than these other printers back into your Mac. Make sure they are connected via a connection by USB cable or network. Do not add your Deskjet still back in.

  Please click here to know how to reset the printing system. Just follow the steps to "reset the printing in OS X Lion system"

  Once the reset is complete, please select: uninstalling the printer software and race through the steps in Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9 for the method that you used to install your printer.

  Once the printer is uninstalled, proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Reinstall your software and drivers:

  1. Please click here to download the latest drivers for your printer.
  2. Click on the download button
  3. Follow the steps on the screen to reinstall your printer.

  Once the reinstallation is completed, please make sure that your printer is added to your Mac with the appropriate driver. Avoid the Airprint driver because it allows that capacity print based and not scanning.

  1. click on the menu Apple and then click on System Preferences.

  2. click on Print & Scanand then check if the name of your printer appears in the list of Printers .

  3. If your printer is listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the sign minus (), then remove the printer. Once the printer is deleted, click the plus sign (), click Add a printer or a Scanner, click the name of your printer with Hello , like the kind.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu.

  5. click Add to add the printer to the list.

  Source: Install your HP printer driver and software for Mac OS X

  Once the printer is reinstalled successfully by using the correct driver, please test the printing and scanning functionality.

  Please let me know if the steps I have provided resolve your scan wireless problems. Good luck!

• HP Deskjet 3050 a does not scan.

  Original title: Scanner

  I have a HP Deskjet 3050 impression scanning & copying but I am unable to get the scanner to scan

  Moved from IE

  Hi Anne,.

  It seems that your scanner does not work.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. what happens when you scan? You receive error messages?
  3. what operating system do you use?

  While your answer above information, you can try to reinstall the drivers for the printer from the following link.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4066452

  Answer us with the above information for you help.

• DeskJet 3050 a will not connect to my wireless network

  I absoulutely can't get my Deskjet 3050 has to connect to my home wifi connection.  It is a Motorola modem/router (wireless) model SBG6580.

  I went through the doctor for help (don't show me the wireless information.  The button did not work.  I tried to use my home password and id, but it does not work.

  Any help would be greatly appreciated.

  To connect to the printer Deskjet 3050 to a wireless network, you will need to temporarily connect to the computer with a USB cable. I'll link the instructions detailed below. If this does not work, let me know and I'll see what I can do to help.

  Install the software of the product for a wireless network connection

• DeskJet 4542: Printer will not install

  I recently upgraded mine and my mother to 10 Windows laptops. And now when I try to install the printer for my Deskjet 4542 software, it says could not be installed to the network. It worked fine on Windows 8.1. It does not show up on my network, according to its offline when I connect via USB to implement. The drivers is not compatible with Windows 10, but I did not. Says everything is up-to-date.

  I solved the problem, I deleted the printer that she showed in the devices. And then connected via USB and try to reinstall the printer, and he accepted this time.