HP deskjet 3052 has works on my wifi after I reset the printer / modem/router - but failed later

Similar Questions

• DeskJet 2050 has. Windows 7 does not recognize not the printer. Cannot uninstall software.

  I installed the software using the supplied floppy.  However, when the printer is connected via USB, windows 7 doesn't recognize it.  I tried all of the solutions posted on the internet.  I cannot remove the software, the 'Impossible' receive following message now

  2081883398 error: failed to uninstall the device CN14G1NF505D1

  In fact, I want to install this printer... but could not find a way to do it.  I tried using the manual "Add a printer" option but get the message "access denied."

  Finally, called MS support and they spent four hours in the control of my PC trying to solve the problem. Cost me $149. But they get get than this sort in the end.

  Seems there was some sort of printing software "ghost" taking up the port... Probably from the HP930 that I had before. Once they have cleared that, everything worked as it is supposed to.

  I still have a ghosting of the 930 in the dialogue of the printer, but it does not hurt so I'm leaving it alone.

  Thanks for your suggestions. Wish they had worked. It would have saved me $149. ;-)

• Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now I'm putting the button in Photo Shop (banner), I have pull down on file/pl

  Message "Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now, I'm putting the button in Photo Shop (banner) in. I pull down on the file Photo Shop button instead and try to select the Banner.psd file. Unfortunately all of the (active) folder is not accessible to all. One is not visibel. Please - need some help here. Thank you.

  @Ach ja, meine Muttersprache ist Deutsch

  You must use the file > Place Photoshop button (Cmd / Ctrl + B).

• My HP C6150 all-in-One will not print. The printer icon appears, but it shows 0 pending work.

  I have just upgraded to Windows 7.  I installed the HP update software/driver for my HP C6150 all-in-One.  I can scan, but I cannot print.  I can print a test page from the HP solution Center under the Toolbox settings/printers; However, it is not a full test page.  I was also able to print an Extended Self Test diagnostic of the HP solution Center under the settings/printer Toolbox.  When I try to print from anywhere else the printer icon appears, but it shows 0 pending work.  Nothing happens, and the icon of the printer ends by goes.  I've uninstalled and reinstalled the software/driver with no luck.  I can't find a patch and update HP says there is no new update.  All diagnostic tests, I'm saying that everything works correctly.  Please help me.

  I was able to remove the printer drivers by using a printer driver removal utility.  The printer driver for Windows Vista and Windows 7 (I've upgraded to Windows 7) were apparently contradictory.  I reinstalled the software/driver and everything is good.  Thank you!

• When I download the creative application of cloud and he finished it seems to be a bit of problem the app section, it says something like: the installation no longer works. You must uninstall and reinstall the creative cloud. But I already do that and it

  When I download the creative application of cloud and he finished it seems to be a bit of problem the app section, it says something like: the installation no longer works. You must uninstall and reinstall the creative cloud. But I already do that and it doesn't seem to change anything.

  Hello

  Please remove Creative Cloud app and Adobe Application manager using the-

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• HP Deskjet 3052 has not recognized on my network

  Several times, I am not able to send documents on my HP 3052 a wireless Deskjet printer. To get it to print it looks like I still have to go back through the installation program for the connected printer. Then the next day or two later, I can't print again. I have a DLink router and a DLink Extender (DAP 1360). The range extender provides mainly internet to a desktop computer. Wireless, it receives the signal of my main router (DGL-4500) and is physically connected to my desktop computer, internet provision. Have a range extender would have something to do with my printer always lost connection to my laptop in my house. I spent time online with the support of 'pay' Dlink with no result and did not want to continue to pay for nothing. Can someone give me some advice on what I can do to keep my printer on my network? Please let me know if I need to provide more information. Would be - what my router goes wrong? I have no idea and really need help as this has been hard for some time now and is very frustrating.

  What version of Windows you have, including the service pack?  I will assume that you have little variety of Windows 7, as you have posted in a forum of Win 7.

  I guess you want to print directly (wireless) to the printer instead of use the ePrint feature.

  You never turn off the printer or leave you it on all the time?

  I suspect that what is happening is that the printer receives a new IP address assigned by your router.  This can easily happen if you turn the printer off and also a number of other devices on the network (for example, your laptop) are not always present on the network...  The diagnosis and the solution to this problem are relatively easy (it takes just a lot of words to describe them)

  Diagnosis
  Using the controls on the front panel of the printer, print a Network Setup page:

  1. press the button to display the wireless wireless.
  2. in the wireless Menu, select print reports.
  3. in the menu printing reports, select Configuration

  Take note of the printer IP address, subnet mask and default gateway on the Network Setup page

  On a computer on which you installed the printer go to devices and printers
  Right-click on the icon for the HP 3052 has, and then select properties from the printer (NOT the same as 'Printer Preferences' or 'Properties')
  Select the "Ports" tab
  By ensuring NOT to click inside the list of ports, use the slider to the right of the list so that you can see the line highlighted and verified which indicates the port used for this printer.
  If necessary, click and drag on the vertical line that is low in between "Port" and "Description" header, so that you can see the complete port identification.
  Make a note of the port.
  For now, click Cancel to exit the properties of the printer.

  If the port shown on the network configuration page and the port specified in the printer properties dialog box are different, that's your problem.

  Solution (assuming that the wrong port is the problem)

  Printers and other similar devices on a network must always be assigned a static (fixed) IP address so that users of these devices (for example, computers connected to the network) can find them.

  Open a browser on a computer connected to your network and enter the IP address of the printer that was shown on the network configuration page.
  You must be connected to the configuration utility based on the web of the printer.  Follow the instructions in the support page this HP to set a static IP address for the printer.

  You can see the range of IP addresses used by your DLink DGL4500 by entering its web-based configuration utility (in your browser, go to 192.168.0.1) and look at the tab "Basis" of the network (see page 30 of the Manual).  It seems that by default the router is to assign addresses in the range 192.168.0.100 through 192.168.0.199.  Use an address outside this range for your printer for example, 192.168.0.25 or 192.168.0.250.  It is ESSENTIAL that the first 3 "bytes" of the IP address remain the same (i.e. 192.168.0).  The only part of the IP address you should change is the last "byte".

  You will need execute the steps described in the next paragraph on EACH computer you want to use to print to this printer.

  In some printer software, HP seems to have included a utility named "Update"IP address"(see directions link above HP).  I'm not familiar with this utility, but his name, if you have it and run, you should then be able to print.  If you don't have the utility, you must manually update the IP address that Windows uses for your printer.  Do so you by going into the "Ports" tab as described above and then clicking on the button 'configure the Port '.  On the next screen, enter the new static IP address that you assigned to the printer and OK your way out.

• DeskJet 3052 has

  Print very slowly. Have reinstalled without change. Link on the forum describing the solution is broken. Thank you.

  Welcome to the timmtam forums

  I saw your post on the printing problem slow that you are having with your Deskjet 3052 a. I have a suggestion for you below. Please, try the troubleshooting steps.

  Slow printing

  Let me know the results!

  Have a nice day

• I'm unable to scan a multi-page document. HP Deskjet 3052 has J611

  I'm unable to scan a multi-page document. I tried everything, re-installed the driver and studied the help settings and there is nothing. Once I scan a page it allows me only to save it and not to add another page to the document. I can't send a pdf CV by attaching two separate pages. I have scanned multiple pages documents other HP scanner and never stumbled on this dilemma. I am running Windows vista and the printer is the printer HP Deskjet 3052 a J611. Help, please.

  Hello

  Don't forget to run the scan of the computer to scan several pages.

  Open the HP software and click on scan a Document or Photo.

  Select the PDF shortcut and if ensure that the dialog box overview checked to be disaplayed.

  Make sure that the resolution set at 300 DPI or lower (any higher resolution does not support multiple pages) and click Scan.

  Use the button to add additional pages until you are finished, and then click Save.

  Shlomi

• Fill out and return to zero problems with Deskjet 3052 has printer and cartridge 61xl black

  Yesterday, my new 61xl OEM black cartridge ran out of ink. I had it only for a few weeks, but this cartridge made of course go fast (faster than the startup cartridges, I swear!). This is a printer at home that is used only by me for personal use.  I wonder how much ink was in it when I bought it. Of course, they don't disclose the ml on the packaging more... how convenient for them, huh?

  In any case, I decided to fill up again. It was my first attempt for this printer and a total failure. I did some research. I used 2 other cartridges to fool the technology of memory without result. Online instructions for which parts of contact on the Strip are either nonexistent for this cartridge or are as clear as mud so I couldn't try it again... This is where it would have been a picture is worth a thousand words.

  It would be a very good alignment page printing. So I think it was successful. But when I tried to print or copy something, it would print the upper part and act like it ran out of ink down. The same thing with trying to clean the print heads. He will start the black stripe and stop about two thirds of the way through. There was less black to have with each successive cleaning, I've tried. If I started on the first cleaning would have the same generous amount of black ink, but decrease as before. I was losing the ink in my brand new color cartridge so I stop messing with it.

  I received errors to gogo (not OEM! False! The sky is falling!). The ink is obviously coming out of the cartridge, so it's not the problem. All I know is that I have a good full of the same black refill ink oem cartridge that I use in HP cartridges for years.

  I don't really like what is happening to this piece of crap cheapo printer so I am not interested to hear how HP has my best interests at heart. What about someone gullible. If I mess up with cheapo ink, then what? And counterfeiting BS is a bogus excuse too.

  Yesterday I had to go out and buy a new cartridge. So today, I found a printer as I used to have (1315) for $20 on Craig's list. Heck, I have tons of cartridges 56, 57 and 58 for this baby and you can charge for this printer throughout the day. I not picking that up next week but then if someone knows how to bypass attempts to be GREEN with this printer and cartridges, of course I understand the help. Maybe who contacts on tape cartridge? Or the head of which HP exec throw this printer to? I'm open to suggestions. Otherwise, the next cartridge runs out in this waste of time and money, it just goes straight to a landfill where it belongs so it won't be wasting someone else's time or money. Thank you!

  It seems that you have introduced an air bubble in the cartridge drain pipe, resulting in starvation of ink you print.

  Pageyield of HP's site lists the 61xl 8.5 ml cartridge.

• How to stop the blue light flashing HP Deskjet 3052 has

  My printer does not print says jobs are waiting in what. While flashing light a printer wireless. How can I get my printer to work again?

  Turn the printer off and turn it back on.

  Go to your print queue of the printer.
  1. click on the PRINTER (upper-left)
  2. choose Documents cancel or cancel printing.

  The flashing light wireless indicates, that it had lost connection with the network, or trying to find the connection. Here is a link that can help you.
  http://goo.GL/q9ZwC

• hp61 in 2512 refill color deskjet refuses to work out who 16 contacts to clear the cartridge

  A lot of suggestions, but none seems work 2512 filled color deskjet printer the printer won't scan or print. someone suggested covering contacts etc.there are 16 contacts on cartridge covering and do what it takes to get the unit to print?

  the cartridge was defective.problem olveds

• For the years FF has worked perfectly with constant Contact. Now, the sevear in CC function will not work in FF browser - they work in all other browsers. Help

  Until a week ago, I had no difficulty or problems work permanent Contact all open in my Firefox browser. Now, I have several with certain functions in CC does not.

  Inserting images, links setting, background color change - these are three necessary functions I use in emails from constant Contact which will stop working at the opening of the CC in the Firefox browser - last updated was today 29/10/2013.

  The function works on Chrome and Internet Explorer browsers.
  I contacted the Support in permanent Contact and the issue is not through their program.

  Safe mode is a troubleshooting mode, it checks to see if Addons or bad prefs are the problem, if safe mode resolves, you will maybe uninstall some addons or reset firefox (bookmarks of Guard etc..)

  SEE: troubleshoot and diagnose problems of Firefox and Firefox Refresh - reset the parameters and modules

  Note the reset feature is NOT a complete reset, so backup information is optional (only the prefs, Addons and a few custom mods will be lost)

• My Epson printer has stopped working with Firefox today. It test pages works on laptop and works with IE. Until today, he has worked with Firefox. Why can I not print anything from the internet with Firefox?

  Until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer will not work. I went to troubleshoot page and printed a test page. I uninstalled my printer and then re-installed. Still would not work from a Web page. I did a system restore. Still did not work. Called Epson. They say that it is a problem of Firefox because it works on the pages of specifications and testing. I installed IE and the printer works. What happened and how can I return to work with Firefox?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_pr...

• HP Deskjet 3830: Have repeatedly reset the printer's wireless network settings

  When I did a WiFi from my laptop to my Deskjet 3830, I does not specify the need for a password, but then when I came back the next day he asked my password (and refused to accept my normal netwrk password).

  I posted the question here, and someone told me to reset the settings of wireless network printer, who worked. But after a while, he returned to ask me the password and I have to reset again!

  How to avoid this problem?

  Greetings @peterB66,

  Thank you access the Forums from HP Support for extra support! I see you want to know how to stop the printer on an intermittent basis provide the password. I will do my best to help you with this problem.

  I suggest updating the firmware of the printer to see if it will help: DJ3830_R1604C.exe

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• PC show 722C as offline Deskjet, the printer is on but printer does not print.

  Yes, a 722C is really old, but it has worked perfectly since may, 1998?

  For the past 6 years, it was connected to a 32 bit Dell inspiron 531 s running Vista.  It connects via a spindle cable on the end of the printer and one USB plug on the other.  (I forgot the name of this type of cord).  Neither the computer or printer are still displaced.

  Day before yesterday, as someone threw a switch, he was offline on the printer icon in Control Panel and leave impression. Print jobs are entered into the queue, but nothing prints.  The power led is on.

  I ran the HP Print doctor a couple of times.  I spent the end of USP to another port.  I plugged in my laptop (running Windows 7) and I get the same message in offline mode.  I unplugged the printer power cord and left for several hours.

  I know that some printers have an internal counter that the printer stops after reaching a specified number of copies.  Is this possible with this model?

  I also know that it is not worth taking to make a diagnosis.   I just hope Miss me just a few little simple fix.

  Thank you for reading this and for any help you can give.

  Thank you very much for your prompt response and you thanks to tell me how to run a test page.  He ran a very faint test.

  When I ran the printing doctor, it is reported that everything was working properly. (I don't remember the exact wording.)  I'll run it again, just to make sure.

  On my device manager, the yellow triangle says "error".  This time I used my laptop with Vista.

  I'll check on a new USB-parallel adapter.

  I appreciate your help.

  Bob_Headrick wrote:

  The Deskjet 722C printer doesn't have any counter that could cause it to quit smoking after a number of pages (or hours or anything else).

  What were the results with the HP Print doctor - he said simply that the printer is off line?

  You can check the following basic printer features: the prinetr and wait so he could get to the Green ready state.  Now, press in and hold the power button in and while holding the power button, press on and release the button to jump to page four times quickly.  Now release the power button and a rudimentary focus will print.

  My guess would be that you have a failed USB-parallel adapter. I'm not aware of any diagnosis for this.  It might be useful to go to start, Control Panel, Manager of devices and see if there is a yellow exclamation warning nothing in the list of devices in the Ports section.