HP Deskjet 3510: HP Deskjet 3510 - unable to connect to the printer

Similar Questions

• HP series D110: update Apple OS Sierra this morning. Now unable to connect to the printer HP series D110 to scan.

  Apple OS update Sierra 10.12 and now unable to connect to the printer to scan. Version of the driver for HP printer is HP inkjet 1 pilot 3.3.2 can someone help me?

  @Lancer3

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly the printer to scan does not work after the recent update of the Sierra,

  Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

  • Image capture
  • Overview
  • Printers and Fax preferences in system preferences
  • Scanner / printer queue

  The basics of the Mac: using a scanner

  I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

  For links related, please here.

  To troubleshoot the macOS Sierra problems: click here

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• "Unable to connect to the printer operation was not successful"

  I use the operating system Win Xp I have the WiFi network and I can't connect to any shared printer on my computer. She has a massage error like
  "Unable to connect to the printer operation was not successful"
  Can you please help me solve this problem

  Thank you
  Ramil

  Hi RamilAnuja,

  ·         This is the first time that you connect a wireless printer?

  Method 1: See if you follow the steps as suggested here.

  Microsoft Windows XP - to connect to a printer on a network

  Method 2: Check to see if this article helps you.

  How to set up a wireless network (WLAN) in your home

  See also:

  Microsoft Windows XP - overview of network configurations

  Printer in Windows problems

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• Unable to connect to the printer, message error "module 126 is missing."

  Original title: 126 module is missing, how can I correct this

  I Reload windows XP and when I reinstalled my printer, my computer is unable to communicate with him and a message that the 126 module is missing.  When I try to open the printer (Lexmark x 5495) put in place & diagnose I get a message that a program has been moved or deleted.
  be grateful for any help

  Hello Campbell,

  This issue can occur due to corrupted drivers, drivers incompatible, if the print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab3

  Method 2:
  If the problem persists, I suggest you install the latest printer driver on the manufacturer's Web site.

  http://support.Lexmark.com/index?page=product&segment=support&ProductCode=LEXMARK_X5495&locale=en&UserLocale=en#2

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• DeskJet 3512: Unable to connect to the network

  I have a Mac, iPad, and iPhone. My husband has an iPad and we just got him an iPhone today. When we tried to connect his phone to the router, we forgot the password. I had to reset the password and then managed to get all 5 devices connected.

  The problem is the Deskjet 3512. Wireless light both blink light eprint. I tried to remove the security on the router, and I was able to print. But when I handed the security WPA - PSK I couldn't print. I had this happen once before and was read to reconnect, but this time I tried everything I could think of and everything I read and nothing has worked so far.

  Any suggestion?

  FYI - I am 74 years old and have some experience with computers, etc. but I've eaten an age when I want things to work. Please keep that in mind when offering suggestions. Please keep simple and no baby...

  I ended up buying a new printer. No problem getting it to connect.

• Unable to connect to the printer - HP photosmart premium c 410

  Macbook air OS x 10.9.5 using

  Printer and macbook show good wifi signal.

  Did the disconnect/reconnect the two devices and the comcast router.

  Check the "share printer on the network", on and outside.

  The printer works sometimes and at random.  Example: trying to print a Word document that has failed, but sometimes from one day to the next, the document printed.  Spookie!  But above all, the printer will not connect.

  Problem started after the two aircraft had been disconnected for a few days and move while some construction was conducted at the scene.

  Is there a setting that needs to be found and reset?  Could any dust, etc. of construction altering the router?  Please help, preferably with a simple solution.

  Thank you.

  arze1905

  Hey @arze1905 ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  If my name is Zac and I'll be your support agent to 1-1 for the same problem! I understand that you have recently moved the printer and the computer autour due construction and since the move has been random failures of printing and printing slow (like 12 hours later slow). Looking for help and I will do exactly that.

  So when I looked through hp.com I came across this "Slow printing" document that addresses the issue with the 10.9 Mavericks and other operating systems, and it seemed like the best place to start. So if you could please go through it and follow the steps and let me know how it goes it would be great! They are very descriptive and easy I promise you.

  Here is the link! Of printing to your printer HP are stuck in the print queue: v10.10 OS X Yosemite, OS X v10.9 Mavericks and v10.8 OS X Lion of mountain

  Get back to me and let me know how it all happens! Have a great day and wonderful / safe from holidays!

• Unable to connect to the printer with El Capitan

  Hello

  I just upgraded to El Capitan 10.11.13 on my MacBook Pro and cannot connect to a Canon MPX470 printer.  There is no update of the driver from the Canon website.

  Anyone has a solution or work around?

  Thank you

  Roger S.

  Your model is not on the list of supported printers. You can find more information on the manufacturer's website. Otherwise, you may be able to get the printer working partially by manually selecting the driver for a similar model that is supported. Some features probably do not work as expected.

  Printers & Scanners preferences window, please click the sign more to add a printer. Opens the Add dialog box.

  Click the Advanced tab. Wait a few seconds for the search printer to fill, and then on the shortcut menu: use, choose

  Select the software...

  Another window opens with a list of available printer drivers. Only drivers that have been installed will be listed, not all drivers. Choose the one which in the model number closest to what you have, and then click OK.

• OfficeJet 4630: Unable to connect to the printer

  I have been using an Acer laptop with a HP printer via a wireless router.  I had to replace the printer with a 4630, which is wireless, still has a USB port in the back.  I connected the cable from my tower to this port, then made the setup wireless according to instructions.  The printer works with the office, but not the laptop via the router.  I get no error message, nothing happens when I try to print.  Although it is a simple operation, I'm in over my head, being almost totally ignorant of Windows.  (With the help of Windows 7).  I guess the problem lies in how I have the laptop implemented, even if the old printer works perfectly with the desktop and the laptop.   The printer reported that it was connected after that I did the installation, and I have the blue light.  I know that the laptop can still access the router, as I have no problem connecting to the Internet.  Suggestions as to how I should have the laptop configured?

  Also, I got this message after you posted my message, but do not see what has been changed: "your message has been modified because the incorrect HTML code was found in the body of the message. Invalid HTML code has been removed. Please review the message and send the message when you are satisfied. »

  I solved my problem.  As I suspected, the problem is with the configuration of the laptop.  I deleted the network information and it built everything back, and now I can print to the desktop via a USB cable and the laptop through the wireless router.  Thanks for your efforts.

  RG4

• Unable to connect to the printer; Printer is showing offline.

  Title: Laptop computer Dell / HP printer

  I have a connection for my printer and ran the disc.  My printer is showing ofline.  How can I change jobs online?

  Hello

  -What is the printer model number?
  -How the printer is connected to the laptop (USB / network)?
  -What is the exact error message / complete you receive?
  -What is the operating system installed on your computer?
  -You are aware of any changes made on the computer before this problem?
   
  Method 1: Run the Microsoft FIXIT from the link below and check if the problem persists.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2: So I recommend that you follow the steps from the link below and check if that helps.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Method 3: Install a printer on a home network
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network
   
  See also the links below which can help you to get help.
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
  Can't print to network printer from Windows 7 64 bit computer
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/51dfa0e0-74b3-48d3-83a1-1770ef5ceb1e
   
  Hope this information helps.

• Unable to connect to the printer, VPN is blocking my computer

  try to connect the printer to the computer. says error meesage VPN crashes my computer. What should I do?

  How do you connect your computer to your printer?  Ethernet?  USB port?

  One thing you can try is to go to the Panel "Printers and faxes", right-click on your printer, select "Properties".  When the Properties window appears, click the "Advanced" tab  Try to select the option "print directly to the printer", then OK your way out.

  HTH,
  JW

• Unable to connect to the printer wireless HP D110

  Bought a new printer D110 last week.  Turned on, it has detected my wireless router Actiontec (Verizon FIOS) with signal max, and I logged it, using my WPA key.  It appears that he successfully connected and returned a hard copy report indicating that he has passed all the tests, at the address IP 192.168.1.4, which is within my reach.

  However, when I told the installer to use wireless rather than in USB mode and entered the IP address assigned to the printer, she returned with a message that it cannot connect to the printer.

  I disabled all firewall and antivirus software and repeat this step again and again, same result.  It's on a laptop Toshiba Satellite brand new under Windows 7 Home Premium.  The laptop has had zero problems wireless in and of itself.

  I repeated the installation on a 8 years old Sony Vaio laptop running Windows XP Home Edition with all the latest service packs and updates.  Same result, failure.

  I checked the software admin to the router, checked that it has detected the printer and assigned to this address.  However, neither the router nor either laptop can ping the printer successfully.  Laptops can ping each other, and the router pings successfully.

  I went to USB mode and connected the printer to the new laptop.  Works very well.

  I'm guessing there's a permissions/firewall problem going on here.  I don't use MAC filtering.  I opened the port 427 incoming UDP activity.  No change.  Any help appreciated.  Thank you.

  You can try to run WIndows Update again and again to make sure that your system is the last and largest.

  Also, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.