HP Deskjet 3510: Software of digitization and Chromebook

Similar Questions

• DeskJet 3510 all-in-one will not feed the paper correctly

  I have a Deskjet 3510 all-in-one and it is only about 6 months.  She went from fine print one day not to catch the paper or grab 2 or 3 pieces at a time.  Sometimes, it will sound as he begins to print and then a beep of 2 or 3 times.  Suggestions to help?

  Yes! I wasn't in the lower plate, and that's where he was suspended. Thank you!

• DeskJet 3510 does not print

  Hello

  I have a HP deskjet printer 3510 and I use a HP with Windows 7 desktop computer. My printer cannot print from the computer, and he repeats to me than "ink cartrides are missing" tri color and black. I replaced the cartridges and and clean. When iIcheck the ink levels via the printer it self he is saying they are full, and the pritner will make copies of photo, used still print from the computer.

  Hi @jackiew2x2,

  Welcome to the HP Forums!

  I noticed that your HP Deskjet 3510 will not print and the computer says that the ink cartridges are missing. I'm happy to help you with this printing problem!

  Please have a look through this general printing guide, your HP printer print jobs are stuck in the print queue.

  Also, I'd take a glance through this guide, a "cartridge problem," "Ink cartridge failed", not "compatible ink cartridges", or "Cartridge missing or damaged" Error Message is displayed on the control panel.

  Hope one of these guides to help and have a great day!

• HP deskjet 3510 scanning black and white photos

  HP deskjet 3510 printer all-in-one scan computer black and white.

  I want to scan an image is what ever color.

  I don't see anyway to change the color.

  Hi len,

  You can choose "Scan to PDF"? I wonder if the PDF will scan in color. Let me know what happens!

  In addition, instead of scanning from the printers of the unit Panel, you scan from the printer software I was alluding in messages earlier? Scan from the software on your PC will give you all of the scan options.

  Take care

• DeskJet 3510 questions - wireless and Firmware

  CZ044A printer Deskjet 3510.  8 64-bit Windows. Used the downloaded software install Version 28.8.

  Can connect without wireless or USB with no problems.

  1. impossible to install the HP firmware update recommended.  Tried different downloads, etc. but each program runs, the "Problem detected" screen appears and stops the installation.  He tells me to correct the problem, and then try again.  There is no problem I can find.

  2. whenever I restart the computer, the printer without wireless or USB connection is lost.  The icon becomes "gray" devices & Printers.  I tried diagnoses of HP who finds lost communication.  I have remove the device and then reinstall the printer and all is well again until I restart.  This happens with the wireless connection as USB.  In wireless mode, the printer is connected to my router, or if the display shows.

  Thanks for any help you can offer.

  Chuck

  Hi Chuck,

  Make sure the printer connected to your network and try to update the firmware by using the front panel of the printer:

  http://support.HP.com/us-en/document/c03368026

  Shlomi

• DeskJet 3510 not found when she and my PC are connected wireless

  Hello again,

  When my Windows-8 HP Slimline Pavillion is connected to an Ethernet port on my router wired, the installer for my 3510 (already well running wireless - is no longer cable) can perfectly find.  A my scan application and printer home page on the work of PC (display of ink, etc.) fine, as does impression on her.

  The 3510 has a fixed IP address in my router (see my other post on airprint not working do not).

  My HP machine, if you unplug the Ethernet cable, everything is configured to connect wireless to my router (which she does very well and gets me internet access, etc.).  It ias 1 set (static) IP address in place in my Cisco/Linksys router to the wired connection and a second (static) for wireless connection - because the HP machine has different addresses for Wi - Fi and wireless.

  My problem is when BOTH my PC and the 3510 are wireless, printer configuration 3510 CANNOT find the printer 3510 is clearly there and running.  The applet or task of scanning bar shows "plugged in."  He said that the tests are not available.

  In summary, everything works when my PC is wired and the 3510 is wireless, bit does not work when both PC and the printer are wireless.

  Ideas?

  Thank you

  Norm Farrington

  Router changes are documented in my other post. See 3510 tags and airprint to find.

• HP Deskjet 3056A: can I scan documents using the Deskjet 3056 A with an Acer Chromebook?

  I want to document scanning with a Deskjet 3056 A to an Acer Chromebook.  The printer is set up wireless, and documents printed successfully.  E - print works well also.

  The question is the digitization.   Reads the error message on the printer, "computer not found.  Make sure that the HP software has been installed on the computer. "Since a Chromebook does not download and app lies... that means I won't be able to scan?   Please help!  Thank you.

  Hello

  They are on an SAME network? The following video is for another HP printer, but try it please:

  https://www.YouTube.com/watch?v=QL1obc9FDyI

  Kind regards.

• HP deskjet 3510 does not work after windows 8.1

  My printer HP Deskjet 3510 cannot be detected after windows 8.1.  My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud

  @klb75,.

  Thanks for posting.

  The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.

  After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=

  * Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.

  If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1

• Recent update for my HP Deskjet 3510 Series does not install

  The recent update for my HP Deskjet series 3510 printer will not install.  I tried the store several times and get the same error on the result: recent installation updates unsolved problems.

  The update is called: Hewlett Packard Imaging Null Print HP Deskjet 3510 series.  The error code that comes up is: 80070490.

  I am running Windows 8.1 and use HP Pavilion g7 - 64 bit laptop.

  Can someone help me?

  Hello Redjerseylinda.

  I understand that this update of the printer is not installed. I will do my best to help you, and there are a few options to consider:

  You can skip this update and all other HP updates. Updates are not essential in the slightest. If that's what you want to do, you can uninstall HP updates from Control Panel, and then restart the computer.

  If you want the update has been installed, you must uninstall and reinstall the printer software. You may use the software update to install this update.

  Please answer as soon as possible. I'm only here to help!

  Mario

• HP Deskjet 3510: HP Deskjet 3510 - unable to connect to the printer

  I had this printer for some time but have never been able to properly print to this printer using this specific computer.   FYI, I'm trying to print wireless at it. This office has wireless compatibility.  I have the drivers and all (I think, I HP everything at the time but not the disk that came with it I lost only).  Don't know why it fails, he said only: "unable to connect to the printer.

  Thanks in advance for any help.

  Hi aunt Shirley.

  First of all, we're going to connect the printer to the network:

  -Restore default values of network within the menu on the front panel of the printer wireless.
  -From your computer, connect wirelessly to the network printer (it should be a name similar to HP - Setup - xx - Deskjet 3510).
  -After successfully connecting to the printer, open a web browser such as Internet Explorer or Chrome and type 192.168.223.1 in the address bar and press ENTER.
  -Click on the Wireless Setup Wizard
  -Select your router and enter the password to connect to the printer to the router.

  Run again the printer software to your computer to rediscover the printer on the network.

  See the support institution by clicking on the thumbs upwards in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• HP deskjet 3510 e - all in one printer

  My printer has stopped printing and scanning manuly but works on e I pad2 printing I tried all settings with no results, you can have launched me operations to manuly to foot print and also leave on e print fine .joe is

  Hello

  Try to remove and reinstall the printer... you can find the S/W in the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5157483

  Choose the operating system and download the driver

  Drivers and printer full feature software e-all-in-one HP Deskjet 3510

• DeskJet 3510 compatability

  I just bought a 3510th Deskjet all in one printer and put in place. I am able to print from my iPad on this unit? If so, how?

  Thank you

  Sorry... check out these links:

  http://h30434.www3.HP.com/T5/other-printing-questions/DeskJet-3510-e-all-in-one-amp-Chromebook-amp-iPad/TD-p/2175895

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/install-of-HP-DeskJet-3510-printer-to-my-iPad-without/TD-p/2749775

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5157460&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02623193-48%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Deskjet 3510: Deskjet 3510 not connect Router

  Hello. I have deskjet 3510 printer wireless. I used to print smooth wireless... But, once I started using Kaspersky Internet Security, printer is unable to connect to the router and I can't use the printer wireless. I guess that the firewall is not blocking. I tried a few things to adjust, but I couldn't. How can I solve it please help.

  Welcome to the @mcmanimanforums.

  I saw your post on wireless connection problems that you have with your printer for installation of Kaspersky Internet Security. I suggest you check the settings in the firewall to configure and enable the printer to connect to the network.

  HP printers - deactivation and reactivation of your firewall in Windows software

  Here are a few links I found the Kaspersky Forums that can help:

  • Unable to print - firewall blocks
  • Kaspersky Internet Security 2013
  • Kaspersky Internet Security 2012
  • How to configure Kaspersky to allow file and print sharing?

  If you like my answer to your concern today, click on the thumb to the top below!

  Happy Monday!

• HP Deskjet 3510: Cannot connect wireless with new router

  I got a new modem with router wireless integrated into my cable company.  Now, I am unable to connect wirelessly to my printer. He seems incapable of finding new wireless information.  The closest I could get the printer screen advised to 'hold the WPS button. '  However, my cable company has confirmed that the WPS NO button there and is not an option.

  Can someone help me get my printer working again?  Thank you!!

  @LisaC11

  Printer:

  E-all-in-one printer, HP Deskjet 3510 range

  Full software features:

  File name: DJ3510_1315 - 1.exe

• DeskJet 3510 will not scan wireless on OS 10.9

  I have a 3510 Deskjet which worked fine wirelessly on my old Mac with Snow Leopard. I recently bought a new IMac with OS Mavericks 10.9.5. The printer will print wireless but not scan wireless. It will scan only with the attached USB cable. I uninstalled and reinstalled the latest version of the HP software. When I disconnect the USB it is said that the wireless connection cannot be found. I have reset the wireless connection, and it's good. What I'm missing here?

  Hey @hellis,

  Welcome to the Forums of HP Support!

  I would like to help you today with the resolution of the scanning wireless problem you encounter on your Mac OS X 10.9.5 operating system with your HP Deskjet 3510 e-all-in-one printer. I understand that you have already uninstalled and reinstalled and tested via USB cable without success. Right now I'm going to guide you through some additional troubleshooting for this problem to scan wireless.

  Step 1: Uninstall the drivers and software:

  First of all, I will have you reset the printing system on your Mac computer. This will remove any printer of your printed folder and Scan, but does not uninstall printers. You must use other printers once the reset complete simply click on the (+) sign more to add than these other printers back into your Mac. Make sure they are connected via a connection by USB cable or network. Do not add your Deskjet still back in.

  Please click here to know how to reset the printing system. Just follow the steps to "reset the printing in OS X Lion system"

  Once the reset is complete, please select: uninstalling the printer software and race through the steps in Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9 for the method that you used to install your printer.

  Once the printer is uninstalled, proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Reinstall your software and drivers:

  1. Please click here to download the latest drivers for your printer.
  2. Click on the download button
  3. Follow the steps on the screen to reinstall your printer.

  Once the reinstallation is completed, please make sure that your printer is added to your Mac with the appropriate driver. Avoid the Airprint driver because it allows that capacity print based and not scanning.

  1. click on the menu Apple and then click on System Preferences.

  2. click on Print & Scanand then check if the name of your printer appears in the list of Printers .

  3. If your printer is listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the sign minus (), then remove the printer. Once the printer is deleted, click the plus sign (), click Add a printer or a Scanner, click the name of your printer with Hello , like the kind.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu.

  5. click Add to add the printer to the list.

  Source: Install your HP printer driver and software for Mac OS X

  Once the printer is reinstalled successfully by using the correct driver, please test the printing and scanning functionality.

  Please let me know if the steps I have provided resolve your scan wireless problems. Good luck!