HP Deskjet 3515: Connection HP Deskjet 3515 to the network without USB cable

Similar Questions

• Unable to connect to the internet without Ethernet cable.

  I have a new router, but can't seem to connect to the internet without Ethernet cable. Trouble Shooter diagnostic tells me that "Windows cannot communicate with the device or resource (primary DNS server). I am at a total loss!

  Not sure, but this post can help (as seems to be the same or a related problem) - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-communicate-with-primary-dns-server/9043f785-2f4e-4cc1-adf5-6ba5ca413749?page=1&tm=1388597381623

  Good reading and see if it helps.

• DeskJet 3055 has J11n: connect Deskjet 3055a J11n wireless network without PIN or WPSA and with Mac Mavericks

  Hello

  I run a Mac with Yosemite and would like to add the printer Hp Deskjet 3055a J11n for the wireless network.

  My router doesn't have any a WPSA button and not a PIN code.

  Before, when I used Mac OS 10.6, I could run the features of the CD that came with the Hp Printer.

  When I try to open the Setup from the CD on Yosemite, he says 'cannot open only on Mac 10.6.

  How can I connect the printer to my wireless network?

  Thank you!!

  Marjolein

  Hi @MarjoleinPeters,

  A driver full features for Yosemite is not available for your printer, or from the CD supplied with your printer from the HP website.  This document applies to the HP printers supported in versions of Mac OS X 10.7 (Lion), 10.8 (Mountain Lion), 10.6 (Snow Leopard), 10.9 (Mavericks), and 10.10 (Yosemite) who have only drivers available via Apple Software Update.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should then start flashing, this means that it is now in auto wireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup-3050 has and then a part of the MAC address. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. For automatic wireless default IP address is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup Wizard along on the left hand side to begin to set up the printer wireless.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer in system preferences.
  3. Print

  Please let me know if that solves the problem. I look forward to hear from you.

• HPJ610a Deskjet 3050: Join the network wifi through router new Deskjet 3050 HPJ610a

  I moved into an area of network connected to fiber (NBN Australia) and installed a new router D-Link DIR - 850L.  I was unable to connect to the router using WPS.  I had to buy a HP Envy, which connected wtihout difficulty.  I just upgraded my router to a TP - Link Archer C9, with a richer control interface, so I tried again to connect my Deskjet 3050.  Once again, no luck.

  I read a number of posts about this, and they all back down to the re-use of your installation of the printer software.  The problem is that the software driver for OS X El Capitan comes from Apple and is already up-to-date. I am able to run the printer when it is connected by a USB cable, so if I could work out how to emulate an installation, I might be able to get connected.  Is it possible to do this?

  Hello

  Sorry for jumping in, but the steps in Mac OS X are in fact incorrect.

  In System Preferences, select Printers and scanners.

  Double-click the listed USB printer, and then select the printer settings / Options.

  Open the Utilitiy tab, and then click Open Utility.

  In the screen, select Convert to wireless and follow the on-screen instructions to connect the pritner to your wireless network.

  Note: If no option appears, click the top phone menu and select Connect a new printer, and then follow the steps by choosing a wireless connection.

  Kind regards

  Shlomi

• Windows 7 cannot print on a deskjet D2650 via the network

  I have a D2650 deskjet printer connected to a desktop computer running XP Pro - SP3 - updated

  I got a laptop with Vista professional I could print from via my wireless to the printer.

  I upgraded to a laptop with Windows 7 Pro and the laptop found the printer over the network, and I was able to print a test page, no problem. I then tried to print a Word document and nothing happens. I come back and print another test page... no problem. Try to print from other programs and... nada.

  I then installed the correct drivers for Win7 64 bit, connected to the printer and print anything very well. When I return to the network and try to print, nothing other than a test page.

  Any ideas would be greatly appreciated.

  Thank you

  To do this on the Windows 7 computer.

  Go to devices and printers
  Add a printer
  Add a local printer
  Create a NEW Port in the Add Wizard in the Control Panel Printers
  Select LOCAL port (unless your printer is a printer on a network with an address IP then chose TCPIP port
  Enter the name of the XP network or IP address
  Install the Win 7 driver

• Connect an Ipod to a laptop by a USB cable

  I want to be able to play music on my IPOD from ITUNES on my laptop, but it is difficult, because my IPOD often disconnects from my laptop when I move or I move the laptop (due to disconnection of the USB cable). I want a medium that allows me to connect my IPOD to my computer without the use of a USB cable - so that I can play everything that's about it on my computer comfortably and without risk of disconnection and also the possibility of losing files on my IPOD if you unplug. Any help?

  Why not get a dock speaker for listening to music? Use of your iPod through the computer cannot be required if the iPod is the only device that hold all the media. If they were on your computer, then you would not have to use the iPod. See recover from iPod media if necessary. If your library is too large for the laptop then pick it up on an external drive. iTunes can be a little finicky with NAS storage, but if you really don't like not the cables then SIN might be the way to go.

  TT2

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• I can't connect a Flir camera to the network

  I have problems connecting to a security camera FLIR FX at the network.

  For your specific problem of FLIR FX, FLIR FX support should give you the best information on how to operate with your systemof their product .

  Post edited by: Jim EZ

  Mac OSX 10.11.2

• How can I limit the number of connections to my PC for an incoming connection at a time. Multiple users are connected to my computer via the network.

  original title: limit incoming connections

  I want to restrict the number of connections to my pc for an incoming connection at a time.  I have several users that connect to my computer, using the same user name & password.  If someone tries to open a session, they fall out of someone who is already connected, without notice. the only solution I can think of is to limit the number of incoming connections to one.

  Hi willard.

  Your question is more complex that most seem to be on the answers. I suggest that you re-post on our TechNetforums where computer professionals can help you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• I installed a new router. Now, one of the PC will not allow the rest of the pc s are there to connect. He is able to connect to each computer on the network. I can't find the question, any help?

  I have checked the computer name, sharing, turned off the firewall.  Still can't find the question.

  I've corrected in fact accidentally the problem today.  I uninstalled a Malware program and tada!, the other pc on the network were immediately able to access the XP pc.  The 'good' pc was always able to access internet, router, network between them.  The only problem we had was the 'bad' pc was able to connect at all, but the 'good' pc were unable to connect to the computer of 'bad '.

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• I can't use my WIFI. I need to connect my iPhone to my computer via a USB cable. What should I do to connect without cable?

  I have the iPhone4 and am running Windows Vista on my Dell computer. The only way I can connect my computer to the internet is using a USB cable from the phone. It's not always easy, but I do not get a connection in any other way.

  Hello

  (1) you are trying to connect to Internet via iTunes?

  (2) is iTunes iPhone detect when the wireless connection?

  (3) you use iPhone to access the Internet?

  Check out the links that can help you further in the question of fixing.

  iOS: Internet connection

  http://support.Apple.com/kb/HT1695

  http://www.Apple.com/support/iPhone/Internet/

  Hope this information helps.

• To connect to other computers on the network

  Is it possible to connect to other computers on my network through the slate of 7 (laptop)?

  Can take a look at Splashtop2 in the game store.  Worked great in webOS, should be just as good in Android.

  WyreNut

• Unable to connect to Xbox 360 via the network.

  Original title: network host down

  OK, so I have my xbox 360 and a laptop of HP under win7 set up on my home network to my dell PC winVISTA.  One day the network just stopped working no real reason.  The xbox and the laptop can connent to the internet but do not communicate with each other.  Pls help and nothing changed just, it stopped working.  The xbox is my media hub and my laptop for work, this is all very frustrating.  Thnx in advance for any help.

  Hello

  1 have you made changes to your computer recently?

  2. what happens when you try to connect between computer and Xbox 360?

  I suggest you follow the methods and check if it helps.

  Method 1: Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Links and check if it helps.

  Xbox LIVE connection problems
  
  http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/connection-issues/connect-Xbox-Live.aspx
   
   
  Error: Unable to connect to your wireless network
  
  http://support.Xbox.com/en-us/pages/Xbox-360/troubleshoot/KB/error-cant-connect-wireless-network.aspx?kbid=978945
   
   
  Xbox LIVE connection errors troubleshooting
  
  http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/connection-issues/errors.aspx
   

• Unable to remote connect to another computer on the network home

  Greetings,

  I have a Windows 7 desktop computer and a laptop Windows Vista Edition full.  I am able to connect using the program of remote connection to the laptop from the desktop, but not the laptop on the desk.  I get
  an error that says "Remote Desktop disconnected' and inside the box, he says" this computer can't remote not connect "and communicate with the administrator, me.

  I turn off the Norton firewall on the desktop and no luck.  I typed the IP address and the name of the desktop computer.  Both get the same answer.  I ping the desktop from the laptop.

  Any suggestions?

  Hello
   
  1. which is the edition of Windows 7 is installed on the desktop?
   
  We recommend that you first of all to you allows to cross check if remote desktop connection settings are correct on the Windows 7 computer. To do this, follow these steps.
  1. Click Start, right-click computer and click Properties.
  2. in the left pane, click Remote settings.
  3. in the System Properties window, click use remotely.
  4. make sure that the following settings are applied.
  a. allow for Assistance connections to this computer remotely.
  b. the remote desktop section, select "allow the connection of computers running any version of remote desktop (less safe).
  5. apply the settings.
  6. restart the computer and try to connect to the remote computer.
  
  For more help on desktop connection remotely, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems
  For more information about remote desktop, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.