HP Deskjet 3520: Error Message at startup

Similar Questions

• Pavilion DV7-6000 series. Error message at startup invalid product information

  I didn't know that my motherboard was bad from the factory.  On the first day, I was unable to do a full factory restore.  I always send to HP.  They sent me a motherboard and after installing it, I was able to do a full factory restore.  It was amazing... However, I now have this error message at startup.  Does that mean exactly?

  When I go into the BIOS, information on the system is xxxxxxx.  When I go to HP technical support.  The product name, serial number and product number is yyyyyyyy.  I know it's fake, why?

  Please don't tell me I have to send it after all.

  

  OK I won't tell you who, but you already know this is bad and you need to call HP. There is a special piece of software used for 'tattoo' Board of Directors. I have seen a few cases where they just give you a link to download and instructions on how make the 'tattoo '.

• Error message at startup.

  I get an error message in my startup saying: C\WINDOWS\$NtUninstallMTF1011$\mmduch.dll. What does that mean?

  Hello

  It is a component of malware or spyware; You must remove immediately using an antivirus and antispyware program. Follow the links given below to remove the virus.

  http://www.Microsoft.com/security/malwareremove/default.aspx

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message at startup! Svchost.exe - Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". The memory could not be "written".

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  by http://www.bleepingcomputer.com/forums/topic261076.html

  1 - Go to control panel

  2. Administrative Tools

  3 - services

  4-go to the following Service: (Windows Driver Foundation - User - mode Driver Framework) right click, then choose Properties---> in the startup type select disabled.

  5. restart the system.

  It fixed for me.

• I get error message at startup lift that C:\WINDOWS\emelumihudusi.dll is not found. Impossible to find info on this program, he worked with.

  I searched for information on this error and can't find anything except 'pay' for programs that corrects errors of .dll.  I'm not having problems I can see with one of my installed programs.

  If you don't want to waste your time, I wouldn't do it.

  I'd do things like:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I get the error message at startup missing modul c:\windows\system32\wabqwuny.dll

  what I'm doing. Download this file are what

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• Error message at startup: C:\Program Files\Play Sushi\PST Text.dll

  Original title: error MESSAGE

  I have permanently the following message when I start my computer ~ ~ ~ error loading C:\Program Files\Play Sushi\PST Text.dll ~ ~ ~ I'd appreciate any help offered. I ran Spyware + Malware + the problem persists. Thank you in advance.

  Something in your system probably trying to run it at startup.  Try to download the freeware "Autoruns" from Microsoft.  Start the program and click on the "Startup" tab at the top.  See if you can recognize an element marked as you described.  If so, then uncheck it.

  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >

  HTH,
  JW

• Error message at startup: error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied

  Hello activity (yet) on Vista 32 bit, I receive a message (at the start). Error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied. Please notify.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• dfrgapi error message on startup - ANNOYS

  It appears each time I start for the last few months. Nothing else seems wrong - any idea how I can make them disappear?

  It's the cute little usual error message with the red X, and the blue border said: 'RunDLL,' which gives me don't don't want to touch it with a ten foot pole. The rest said:

  C:\Users\Michelle\AppData\Local\SystemGLInterval\DfrgapiServ.dll

  The specified module could not be found.

  >

  Hello

  similar to "'DfrgapiServ.dll ' is malware"

  read below information about ot

  http://www.prevx.com/filenames/X1086115178255486449-X1/DFRGAPISERV.dll.html

  follow these steps

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• I get the following error messages at startup: Windows Sidebar Settings.ini. is used by another system. Recorder warning: recorder! Initialize is not yet call... The log file can corruption exp. application failure did not start.

  Original title: opening of the pop ups

  I have Vista Home version.  When I connect, I get the pop - ups following:

  1.) _Windows sidebar Settings.ini. is used by another system.

  Recorder 2.) WARNING: Logger! Initialize is not yet call... The log file can corruption exp.

  3.) down the application did not start.

  Also: while I'm on the internet a pop - up occurs from time to time indicating: "Internet Explorer has stopped working".  Sometimes I get started, and sometimes I can just 'X' out and I'm always on.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  I suggest you try the procedure below.

  Step 1: Try to perform the clean boot in order to solve startup error messages.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Step 2: I suggest you try the steps outlined in the article below to solve the problem of internet Explorer.
  http://support.Microsoft.com/kb/936213

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error message at startup [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  original title: [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  "Ideas: why make this message at startup ' [.] "ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787" how I can remove it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  The greatest gift that anyone can give to someone else's time. So thank you for your.

  Nothing I've tried on this Web site or any other does not prevent the error of dll text block whatever the hell it is.

  MS know no more apparently.

  but they don't

  http://support.Microsoft.com/kb/330132

• Slow start. Error message at startup that says: c:\users\user\AppData\Roaming\adobe\sp. DLL

  Very slow start.  Does not load favorites. Internet does not not & c:\users\user\AppData\Roaming\adobe\sp error message. DLL

  The specified module could not be found.  Please notify.

  Hello

   
  1. All changes made to the computer before the show?
  2. What is the message you get from the Internet does not?
  3. What is a wired or wireless network?
  4. Are you referring to Favorites in Internet Explorer? What happens when you try to load a?
   
  Try the methods provided and check.
   
  Method 1:
  Step 1:
  Start the computer in Safe with networking and check if any problems persist, check especially startup and Internet connectivity. Check out the link and follow the steps.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  If the problems do not occur in safe mode, and then perform a clean boot. Check out the link and follow the steps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
  Method 2:
  Check out the link and follow the steps. Check if the computer starts always slow.
  Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/977419
   
  Method 3:
  To solve the network problem. Check the link and try the troubleshooting steps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can also check out this link and try the steps.
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• Error message at startup in Windows 2000, "Tcmsvr.dll, the file is missing.

  We get the same error messages three times at the start of Windows 2000 on some of our companys computers: "Tcmsvr.dll, file is missing. Computers are Tecra s1 models.

  What driver Toshiba is this related to?

  Hello

  I studied a bit and it seems that this file should be placed in the system32 folder.
  In my opinion, this file is part of Toshiba common modules.
  I m not 100% sure, but you can try to refresh (restore) the common modules.
  Maybe this will help.

• Satellite S2400: "Block 1 BIOS is corrupted" Error Message at startup

  Hello

  my laptop S2400-103 does not start, instead it gives my the error message mentioned above and request a disk "interview."

  How can I fix? I downloaded 2 updates of BIOS for this model, but they both require a Windows system running.

  Thank you

  Hans

  Post edited by: hanzf

  For this old Satellite notebook, you can download Win and TRAD BIOS update.
  Here you can download the updated BIOS TRAD (traditional) version and it works using the floppy and has nothing to do with the Windows operating system.

  I don't know if you can fix damaged BIOS, but you can try it.