HP Deskjet 3520: Scan of the computer option is missing from the opening of the window of the printer control panel

Similar Questions

• HP3070 b611all in a printer: HP3070 unable to scan from the printer control panel

  Hello

  Although I can scan a document from my laptop I can't do it from the printer control panel.

  I tried following the instructions in the Support Center
  "HP Deskjet 3070 e - all-in - One Printer Series - how Scan: from the control panel" but I didn't know where I could: ' activate the scan to the computer connection (Windows only).

  Anywhere there is no mention of "Scan" under settings B3070 only in a separate file, HP Scan on my system...

  Thanks for your help so far.  I now have much more HP files/programs that I started with.  What can delete and to be able to continue to print wireless & scan of the computer, or maybe I should ask what files do I need and I can uninstall.

  I ordered the following cable to establish a connection between my laptop and a printer?  I hope it is the right one.

  USB printer cable lead for HP Hewlett Packard and Lexmark A - B

• Computer not found displayed on the printer control panel. ?

  Computer not found displayed on the printer control panel. It analyzes not but prints ok. Running the utility HP scanner Diagnostic 4.2 says service Windows Imaging does not. If you ignore this message says the Twain service does not work because it is used by another service?

  Problem solved. I managed to get Windows Imaging served running afetr a lot of the research and this scanner enabled to work. Thanks, but does not need your help after all!

• Cannot access the printer control panel application downloads

  My printer is connected to my network hub, eprint is activated and I can email print my eprint service that prints

  However, when I try to connect to the application, all I can get is quick forms. I get 1 error server - there was a problem connecting to the server

  Please can someone help?

  Hello

  First try clicking the printer icon, select Preferences, then select define a country / region.

  Ensure that the correct area is selected, and then try again.

  If the same persists try restarting your router and the hub by unplugging its power for a while. Once the devices are completely upward and you are capable of internet connecct again restart the printer and try again.

  If the same dtill persists try to define a DNS address manually:

  Open the amd configuration Menu and select Menu wireless.

  Press Setup display network and locate IP address.

  Type the IP address in your web browsing and select network.

  Select IPv4 and a manual DNS.

  Set the primary DNS as 8.8.8.8

  and the secondary as 8.8.4.4

  If you don't see such an IPv4 option select the submenu of networking, and IP address.

  I guess that those who must resolve this, if not I suggest turning off and reset services web, but you will lose your current addtess ePrint and will have to choose a new instead.

  To do so go to configuration > Web Services and select Remove Web Services.

  Then, reopen the meu to Web Services and follow the steps to reactivate the service.

  Using the printed sheet, add the Code to request provided to the HP ePrint or on the connected HP site and select a new address for your printer.

  Hope that helps getting the problem solved.

  Shlomi

• spooler under app closed and lack all printers from the printer/control panel

  have been authorized to issue and ms bound to my machine and hacked the directory and the fixed. It has not been long since I used the printer and found it doesn't work not today. tried the fix it program several times. shows the show and start spooler fixed, but it closes before the program ends even his control?

  Thank you all!

  Before I need to uninstall the many updates in the calendar that I lost control of the printer, another update must have solved the problem. All my printers are back and the printer works normally? guess that MS realized the problem and fixed it.

  Thanks again!

• I don't see any apps on the printer control panel or on the web at the signing. What's wrong?

  HPPhotosmart 5510, connected to a MacPro. Other than regular software updates any changes made. Printer is active and works fine with wifi. Only problem I can see does not list applications.

  Hi mkz, here is a link to a post with the same problem that you have some http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/No-apps-available-for-my-new-HP-Photosmart-5515/m-p/1598159#M22058.

  I don't know if the last suggestion, I did worked or not, but you can try the (drop-off and allowing Web Services and Restore Factory Defaults) because they are relatively easy to make from the front of the printer.

  This is a link to a larger list of actions for more general ePrint/Apps connectivity troubleshooting although it does not specifically call the problem you are experiencing.

  Hope this information helps solve the problem and after return to let other users know how you scored.

  Good luck.

• scan option email missing from HP6500 on windows7 home premium

  I use HP6500 with XP and 7 Ultimate - all functions and options HP solution Center work.

  with windows 7 Home Edition premium scan-to-mail option is missing from the menu scan-

  I ask you help to find out if this might be a limitation in windows 7 Home premium or a problem in the HP software

  can anyone give a solution?

  Thank you

  Ciao

  Hi PIER 29,.

  HP Solution Center seems to just use the default e-mail program in Windows. If the default e-mail client has not been properly defined, this problem may occur.

  Click Start, select default programs
  Click settings by default access and computer program Set
  Click Custom, and then select Windows Live Mail
  Click OK

  Then, follow these steps:

  Click set your default programs
  Select Windows Live Mail from the list
  Click set this program as default
  Click OK.

  I hope this helps... We will know.

• Why does'nt my Defender windows appear in my control panel, and when I do a scan of the registry, it says that it is disabled where and how can I find

  does anyone know how to locate the Windows Defender feature in Control Panel mines seemed to disappear and when I did a scan of my results showed that i had disabled it how this feature, I know that this probably isn't important but I just wanted to know if the model heads had the answers

  Windows Defender cannot be used with AVG, McAfee, MSE or Norton, and several other AV products also report potential problems with Windows Defender.  It is part of the Vista and Win 7 operating system and cannot be uninstalled.  It must be uninstalled XP if you use AVG, McAfee, MSE and Norton.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  MSE and Windows Defender

  If this does not solve your problem, please post back and elaborate detailed about your computer, AV programs, etc..

  I hope this helps...

• LaserJet Pro M177 MFP: HP LaserJet MFP M177fw Pro no widget Scan on the printer

  My newly purchased printer HP LaserJet Pro MFP M177fw don't have a widget to Scan on the printer screen. So, I can't scan and send it to email directly, without having to turn on a computer.

  Can you please help me, thanks.

  Herza

  Hi @Herza,

  I see by your post that you would like to know how to scan from the control panel of the printer to send. I would like to help you today. Please select "Acceptable Solution", if these measures help to solve this problem. Thank you.

  This model is not the function of scan from the control panel. You must use the HP scanner on a computer to scan software.

  This document provides the steps for scanning on Windows 7. HP LaserJet multifunction printers - how to scan (Windows 7). You can use the HP scanning software to scan a document and then send it to the email.

  But you can install an APP on the printer itself called "Scan to Email".

  Once you register with www.hpconnect.com, you can add the APP.

  Click on add a device under the devices tab.

  Put in the claim code you printed to register and add the printer.

  Click the Services tab, then click on the sign - on the right side.

  Select your printer from the drop-down list.

  Then scroll to the application called "Scan to Email".

  Click on add to my printable cards.

  Now you should have an icon on the screen of the printer under APPS, called "Scan to Email".

  I hope this helps. If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Computer freezes Vista, get the error of the audio control panel has stopped working

  my computer is running windows vista Home premium and after it starts and connects to the home screen, it immediately freezes and it says the audio control panel stopped working and the mouse and the keyboard does not work

  Reference Dell inspiron 5305 windows edition running Home premium

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• After you disable the speakers in the Sound Control panel, how to re-enable?

  On Vista 64-bit with latest updates, in a hurry to catch a signal continuously with the sound only through headphones, I turned off one of the entrances in the sound control panel, which was the laptop speakers.  This was done by selecting the element and selecting Disable in the right click menu.  When I come back to this Board for re - activate the speakers, they are listed is no longer and are not doing a scan for the hardware.  How can we reactivated the speakers?

  The audio device is "SoundMAX Integrated Digital HD Audio", and the computer is a Lenovo Thinkpad T61P.

  Hello

  Right click speaker near clock - reading devices - right click in the area of the boxes - check see the disabled and disconnected devices. Select speaker, then on the right click lower properties check the settings for the active device usage and so on. Also do the same to set up in the bottom left of this box.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

  The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
  It does not show in the other browsers, other people can see it, but I can't.
  Even with these sites:
  http://www.jokevan.nl/HTML5/oef3-3.html
  http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Find the nvidia Control Panel after installed of new Vista Business (Spack2)

  Recently installed the new hard drive and therefore had new Vista Business installed (downloaded, with Service Pack 2).  The Nvidia Control Panel is 'gone' if I can is more set up two external monitors + for computer laptop is to say as a "clone".  PC automatically to an external monitor as soon as plugged in.  When I connect to an HDTV, it's same with a resolution of crazy.  Any advice?

  Thank you

  Hello

  ·        You have installed the drivers for the graphics card from nVidia?

  Once you install the drivers for the graphics card, it automatically installs the nVidia control panel. If you had bought the graphics card, you may have been provided separately with a DVD, check also in the DVD provided with control panel map.

  To download the latest drivers follow the link given below.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!