HP deskjet 3540 series (D142AF: print validation error)

Similar Questions

• HP deskjet 3540 series (D142AF: cannot print from my computer hp laptop)

  I had downloaded fax from windows and scan and was able to print. I tried printing from my computer hp laptop today and even is printing... No error came place and so I do not know which causes this problem. Please can you help me?

  Thanks for your help! I am now able to print again... I'm selecting the incorrect printer by mistake before

• HP Deskjet 3540: Unable to print documents using the HP Deskjet 3540 (network)

  I am printing documents using the HP Deskjet 3540 of difficulty.

  All options in the print dialog appear to be blocked.

  I've uninstalled and reinstalled the software nothing works. HP Print and Scan Doctor offers no help.

  Screenshot below

  Any help would be greatly appreciated.

  

  X-23 you are the boss.

  I followed your steps and was able to print a test page for Word, PowerPoint and PDF. I also printed a picture on plain paper in full transparency. I was also able to quickly implement the project and printed without a problem.

  I have not tried to print a photo on photo because of the low ink level paper but I'd be surprised if I'm not able to.

  Thank you for your kind and your patient attention to the problem I was experiencing.

  It's really appreciated.

  Prosperous 2015 for you and yours.

• HP Deskjet B611 3070 series: HP Deskjet 3070 series B611 Scan Driver error - failed to scan

  Tried for awhile scan documents, etc., I am unable to do so.  I tried the HP print and doctor Scan and the message that I have for them is "this tool was unable to resolve the problem even after a reboot" someone at - it had a similar problem and managed to resolve it? Any help would be appreciated please.

  Hello @Tricia2,

  Welcome to the Forums of HP Support!

  I would help you today to solve the driver Scanner error you receive when you try to scan from your HP Deskjet 3070 e-all-in-one printer to your Windows 7 computer. Thank you for including the troubleshooting steps you tried before reaching out for support. Because the HP print and the tool of analysis of the doctor could not solve the pilot error that you are experiencing, I'll run through some software manual and driver troubleshooting steps. Can I please you follow the steps below.

  Step 1: Uninstall the device:

  For the purposes of troubleshooting, it is crucial that we have a clean slate to work with your computer. Therefore, before you perform the "fix" I'll take remove you the package driver HP full software functionality of your system. If you use a USB cable connection between your HP Deskjet and your Windows computer can I please have you unplug this cable now.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select the HP Deskjet printer
  5. Select Uninstall
  6. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation screen invites you to
  4. Once the installation is complete, please try to scan the image.

  Please reply to this message with the result of your troubleshooting. If the problem persists can tell you if your printer is connected via USB cable to your computer, or a network connection. I can't wait to hear strings attached good luck!

• HP deskjet 1010:802 black print cartridge error

  Hi, I was buy new set (light black) cartridge for my HP 1010 deksjet via the HP store. But when I changed the black cartridge, he said that my new cartridge was not original, and I have to install it. When I changed the Tricolor flag, it works! I cleaned the black cartridge and place it on my printer, but doesn't work

  What should I do?

  Hi @Osh35,

  Thank you for your quick response. Please visit this link: http://support.hp.com/us-en/document/c03772927 for more troubleshooting to try to resolve the situation.

  I really hope that the problem is solved without hassle and the printer works great. I hope this helps. Please let me know how it works. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts in giving me a congratulations. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• HP Deskjet 2510 series additional print for Word page

  

  I have problem with printing Word documents. Whenever I have print something, this extra page comes out with some information from the source (name of file, directory, etc.). It is a little troubling to me, and I could not find how to stop it. I hope that there is someone who can help me. Thank you.

  Hello

  It has to do with the settings of Word, itself and not with the printer.

  On the file menu, select Options, and then open the display settings.

  In the print section uncheck the include file information.

  Confirm the changes and it will print is no longer.

  Shlomi

• HP Deskjet 2544: HP Deskjet 2540 Series not found - Error Message

  Hello

  I'm getting "HP Deskjet 2540 Series not found" - Error Message When I tried to scan...

  I have recently upgraded to windows 10. I get the same error message when I trobleshoot using 'doctor print and Scan '.

  Please fo help me solve this problem...

  Thank you...

  Hey @HpUser83,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve the 'HP Deskjet 2540 Series not found' scan error you get when the all-in-one printer HP Deskjet 2544 scanning to your computer Windows 10. There is probably a software or driver error occurring. Can I please you follow the steps below to resolve this error.

  If you use a USB cable between the printer and the computer connection, please unplug this cable now.

  Step 1: Remove the driver:

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP Deskjet. If you see your HP Deskjet in the list, click it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Deskjet printer is more than showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. look for your HP Deskjet printer driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Remove temporary files:

  1. click on the Start menu

  2. type run. Click on Run to launch the run dialogue box.

  

  3. tap folder in the run box, and then click OK

  

  4. when the Temp folder, open select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  6. close the Temp folder when it is empty

  7. right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download and install the package to the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once the installation is completed successfully, please test scan.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• Error: Printer Validation failed

  Hi guys, new here.

  I'm trying to print via Microsoft Word on my printer HP Photosmart 6C100 series of my laptop HP Envy of m6 through a wi - fi connection, but by clicking on the printer 'HP ePrint', I get the error 'printer Validation failed. I use Windows 8. If someone could help I would be very happy, thank you.

  Ross

  This printer does not work with the ePrint driver.  That's why you get this error.  I don't really know why it's even pick up the printer.  To get the printer to work with your computer, you can use the InOS driver that is built into Windows 8, or you can use the full download of software and the driver for HP.  I'll link the download below.  The InOS driver should just pick up and install the network printer without telling you.  If this is not the case, try to install the software below to print and scan with the C6180.

  HP Photosmart full feature software and drivers

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• need to find the printer driver for HP deskjet D2460 series...

  need help to find a printer driver for my HP DESKJET D2460 series... have no original disk...

  Surely you would visit the HP website > support > downloads for your specific model

• DeskJet 3900 series: what then I do with my printer hp deskjet 3900 Series, since there is no driver for windows 7?

  I need a software/driver to use my printer deskjet 3900 series Windows 7; HP and Microsoft should help me please

  Thank you

  Well, I found this.

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-DeskJet-3900-drivers-for-Windows-7-operating-system/TD-p/760507

  But the document is no longer available.  Printer must be very old.

• Computer is unabler to commuincate with the series of printer HP Deskjet 1050 J410

  I just install the printer, I did everything well, because he said, he is ready to use, but I get a message like

  "my computer is unable to communicate with the printer" can someone please tell me what I did wrong and how

  to solve this problem? I can make copies, but I can't print or scan

  Original title: I just install a series of printer HP Deskjet 1050 J410

  Hi Bill,

  -What do you mean "I can make copies, but I can not print, scan or?

  It could be that you have a firewall application installed on your computer that prevents communication with the printer, or perhaps you need to uninstall and reinstall the printer due to corrupt files.

  Step 1

  Initially I suggest you run utility HP Print and Scan of the link doctor and check if this solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/Forum/network_diag/&softwareitem=MP-120776-1

  Step 2

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers to communicate.

  I suggest disable you the Windows Firewall and the antivirus temporarily.

  View items-

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Step 3

  You can try to update the latest version of the printer drivers and see if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4027462

  Step 4

  Uninstall and reinstall the printer and check if it helps.

  Add or remove a printer

  (Also applies to Windows 7)

  For your reference:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• the Photosmart b110 series printer: Ox19a0020 error code

  My printer has error code ox19a0020 I looked for alternatives to the HP site and I cleaned the printhead manually according to instructions and pulled the plug and replace etc etc and yet it still has the same error message. Help

  Hi @nannie07

  Thanks for getting back to me.

  I agree, you probably need a new printhead.

  Printhead replacement games are available from HP customer or authorized service providers assistance.

  Contact HP for service in all countries except Asia-Pacific.

  If you have completed all the above steps and your product still has a problem, the printer service
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

• DeskJet Ink Advantage 2520hc: print error every time that a text is added or subtracted (edited) in a word document

  Hello.

  I've been using this printer for over a year now & for the last few months, I was faced with a weird problem. Whenever I'm adding or subtracting the text (s) in a word document, the print gets error. I mean, after you have created a document word if I change it, then it is printed becomes defective. I tried to solve this problem by trying the printer allignment option or option of head cleaning, but didn't get any solution. In order to obtain a perfect impression, I have to create a new document word again. I am trying to express my problem by the picture below.

  

  Please help me solve this problem.

  Thanking you,

  Waiting for your response,

  music2soul.

  Hello @music2soul and welcome to the Forums of HP!

  I see that you are experiencing printing problems.  I would like to help!

  You have problems, make a copy?

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Advantage of ink HP deskjet 2545: advantage of hp deskjet 2545 ink cannot print

  I just bought the HP Deskjet Ink Advantage 2545 and install the driver on my desktop Microsoft windows vista 32-bit, but it can not print and the print also test error. After that, I try to my computer window 7 64-bit laptop and the problem was the SAME, it can't print anything and test printing also error. I tried many way solve the problem, but there is still same, example: 1) select the checkbox hide all Microsoft Services, disable all services and then click on OK and rebbot.
  (2) temporarily disable all Antivirus software.

  (3) reinstall the driver

  4) using print and scan doctor

  BUT THE PROBLEM REMAINS THE SAME!

  

  Hi @TommyHong,

  Welcome to the Forums of HP Support! I understand that you are not able to print to your HP Deskjet Ink Advantage 2545, since your computer running the Windows Vista operating system.  I see that you did a lot of troubleshooting steps already, thanks for that! I would try a different approach, please follow the steps below:

  1. perform a clean boot: How to perform a boot in Windows

  2. now, go ahead and use the System File Checker: use the tool File Checker system to repair missing or corrupted system files

  3 uninstall/reinstall:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP software DJ 2545 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software DJ 2545 disappeared from the list programs, but also your HP folder listed under all programs in your Start Menu.

  5. now move forward and start to Setup the printer to a wireless network for the HP Deskjet 2540 and 2545 all-in-One Printer Series

  Here is the link for the software and drivers:

  HP Deskjet 2540-All - in - One Printer series full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you