HP DeskJet 3634: HP DeskJet 3634 print show

Similar Questions

• HP Deskjet F380 printer shows "offline" and does not print.

  original title: have a HP Deskjet F380 printer stating 'offline' replaced new ink cartridge checked cable always in offline mode. Verified that the printer is not on the pause mode.

  Printer was working perfectly until I put in the new ink. Do check the cable (works well on a different printer). How can I get the printer to work again I'm using XP home. Checking the status of the printer and there is no tick etc. against the break point in the fax and Printers window.

  Hello

  Follow the steps in the link below and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=1128296#N71

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• Printer HP Deskjet D1460 does not respond in the laptop but printing show print option

  Mr President, 2 years ago, my hp deskjet d1460 works well in Asus X54c. After 2 years when I placed the new cartridge 21-22 don't is not printing. But the printer shows printing. In short, through control of the laptop I couldn't make answer to this printer.

  PL. suggest

  Mr President, it is later can print, but before my file selected print the print file name, directory, and so wasted 1 extra page excess in every print of my impression of selected file.  As suggested by the intermediary online is now is solved by deselecting "dicucument properties." in the option file. Thank you very much

• Installed hp deskjet 5150 printer running on new dell hp deskjet 5100 shows and as the installed printer

  HP deskjet 5150 printer

  Windows 7 Home Premium - 64-bit

  Info computer printer shows NO 5150 hp deskjet 5100 installed,

  No change - computer was new

  I installed my printer hp deskjet 5150, following the signs to a new Dell computer.

  Windows 7 automatically installed the driver from the usb cord was plugged to the computer (it was connected first to the printer).

  Tested the printer by typing a few lines in a Word document, and the printed page.

  However, I noticed that the Dell info on printer shows printer installed is hp deskjet 5100, 5150 not.

  Also, I don't get the screen indicating the ink remaining in the cartridge when I print a page.

  I get a message when the cartridge is low or it prints everything, just not when the cartridge is empty:

  Is the print driver for the hp deskjet printer 5100 the same as for the deskjet 5150 printer?

  I don't want to buy another printer because of the expense.

  Thanks in advance.

  Ouaenre

  The driver is the driver for Deskjet 5100 series which includes the Deskjet 5150.  If you wish you can change the name - go to start devices and printers, click with the right button on the properties of printer deskjet 5100, and then type a new name in the text box, OK.

  There is not a Toolbox in the Windows 7 drivers, the paper here is workarounds.

• PC show 722C as offline Deskjet, the printer is on but printer does not print.

  Yes, a 722C is really old, but it has worked perfectly since may, 1998?

  For the past 6 years, it was connected to a 32 bit Dell inspiron 531 s running Vista.  It connects via a spindle cable on the end of the printer and one USB plug on the other.  (I forgot the name of this type of cord).  Neither the computer or printer are still displaced.

  Day before yesterday, as someone threw a switch, he was offline on the printer icon in Control Panel and leave impression. Print jobs are entered into the queue, but nothing prints.  The power led is on.

  I ran the HP Print doctor a couple of times.  I spent the end of USP to another port.  I plugged in my laptop (running Windows 7) and I get the same message in offline mode.  I unplugged the printer power cord and left for several hours.

  I know that some printers have an internal counter that the printer stops after reaching a specified number of copies.  Is this possible with this model?

  I also know that it is not worth taking to make a diagnosis.   I just hope Miss me just a few little simple fix.

  Thank you for reading this and for any help you can give.

  Thank you very much for your prompt response and you thanks to tell me how to run a test page.  He ran a very faint test.

  When I ran the printing doctor, it is reported that everything was working properly. (I don't remember the exact wording.)  I'll run it again, just to make sure.

  On my device manager, the yellow triangle says "error".  This time I used my laptop with Vista.

  I'll check on a new USB-parallel adapter.

  I appreciate your help.

  Bob_Headrick wrote:

  The Deskjet 722C printer doesn't have any counter that could cause it to quit smoking after a number of pages (or hours or anything else).

  What were the results with the HP Print doctor - he said simply that the printer is off line?

  You can check the following basic printer features: the prinetr and wait so he could get to the Green ready state.  Now, press in and hold the power button in and while holding the power button, press on and release the button to jump to page four times quickly.  Now release the power button and a rudimentary focus will print.

  My guess would be that you have a failed USB-parallel adapter. I'm not aware of any diagnosis for this.  It might be useful to go to start, Control Panel, Manager of devices and see if there is a yellow exclamation warning nothing in the list of devices in the Ports section.

• hp deskjet 1000 printer: hp deskjet 1000 problems

  hp deskjet 1000 printer is about 5 years old and has been under the back seat of my truck. I printed about 25 pages when it was new and not the have not used since then. out of the printer and now I have a dell inspiron laptop computer m531r. connected the printer hp with a usb cord and downloaded the latest update from hp. When selecting "print test page", the printer works perfectly as if it is printing, but paper comes out of the Virgin. I have cleaned the ink cartridges with paper towels soaked in alcohol, to run each test and head cleanning hp offered on the troubleshooting section. ink level indicators show the ink to about 80% full. and I updated all the parameters. I rebooted the printer and the computer. I checked and any document, when selected for printing, the printer thinks it is printing. He's even going the correct speed with spacing appropriate, etc. just comes out blank. There is nowhere any dried ink on the print cartridge heads they are clean!   the printer receives data and think it's printing. Therefore, the system does not give messages of any problem. I am concidering buying new cartridges of hp61, but it is a risk not knowing not if the problem is in the cartridge.   TS

  @tomcat056,

  You are right that there is a risk to replace the ink cartridges. In all likelihood, the cartridges are dried up and the sensor is defective. New cartridges may not solve all your problems of printer. Honestly, printers are not designed to roll the shotgun in your truck. Personally, I would take the money spend you on the new cartridges and buy a new printer.

• DeskJet 3520 prints paper usually ok but food takes hold of the sheets of labels Avery too early

  I have a Deskjet 3520 eAIO (wireless). Print labels Avery fine on other printers, but when I try to print them on the 3520, it seems to start to give the sheet of labels too early which means printing from more down the page (about 1/2 "") as it should. My 8 + yr old Canon print all types of avery labels with no problem, but he just finally bit the dust and I'm stuck.

  Hi panavygirl,

  I understand that you have a problem with printing labels Avery to your Deskjet 3520 printer. I'll try my best to help you solve this problem. Could you please tell me the model number of your printer and the operating system that you are running on your computer?

  HP Deskjet 3520 e-all-in-one and e-all-in-one printer, HP Deskjet Ink Advantage 3520 product specifications the table below shows the types of paper supported. This printer doesn't support label paper. That said when you choose the type of paper in the advance printing preferences menu, try to choose a paper to heavier weight for the printing of labels.

  The following table contains a list of sizes and types of paper supported.

• My printer hp deskjet 3650 printer cannot install successfully. Printer driver cannot be found.

  My printer hp deskjet 3650 printer cannot install successfully. Troubleshooting result indicate that the driver printer cannot be found.

  Hello

  1. who is the operating system installed on your system?

  2. did you of recent changes to the system before the show?

  3. What are the troubleshooting steps you have done?

  4. do you believe that no matter what exclamation point in Device Manager?

  5. How do you install the printer?

  6. are you using the CD or downloaded the printer drivers?

  7. What is the full error message?

  Method 1: Uninstall the drivers and install the drivers.

  Note: Follow the below link to download drivers and also to choose the version of the operating system installed on your system.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=304535

  Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  In addition, check out the link below and check if it helps.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=34773&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=304535

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/471d1c5f-0939-4601-a6b2-146e147c90c8/

  Let us know if it helps.

• DeskJet 1512: Deskjet 1512 printer does not install...

  Hello

  I have a Deskjet 1512 printer ' All in one '.

  I followed the instructions of installation and configuration up to the last comma - and still some 6.5 hours later - I still have a new printer that doesn't work.

  I am running Windows XP / SP3 / Dotnet 3.5

  I ran the installation disc (supplied), made a cup of tea, ticked the boxes, responded to the questions.

  When you are asked (and only when prompted) - connected my USB cable and the printer to the computer... This is where the problems started.

  The function of 'Full' whistles and software bells began to try to detect my camera.

  He was defeated by Windows Harward "Wizard" - saying it had detected a new device... but it can be installed "due to a missing Module.

  About 2 seconds later - the HP software "Full Feature" he spits is dummy and tells me to connect my printer and check the USB cord...

  Yes - I replaced the power cord USB ther with 4 different ones I have alternatives, but also try different USB ports on my computer.

  Always the same question.

  However-

  The Scanner was installed - and works very well.

  So, I tried a forced installation of "Backdoor" of the drivers of the printer - via the Windows hardware Manager.

  This all seemed so promising - the pilots finally looked as if they were installing.
  99%, the hardware Popup Manager informed me that my "device had been correctly install '...

  About 1 second later - another window will appear - now telling me that it was not possible to "do something"? and that my ' device was not installed.

  A quick look through the driver manager showed me that my scanner was installed, but the printer was not.

  I completely uninstalled the HP software, then Dot Net... cleaned all Temp files and deleted all entries in registry rogeu.

  Then restarted my computer (after checking that USB 2 has been enabled in Bios - who it was)

  I then reinstalled the far Dot Net (downloaded via the HP Web site) and the "Full Feature" software (also courtesy of the HP site) this day... and...

  .. even the same.

  In short - I tried:

  • Remove all previous installations of HP and Dot Net 3.5 software
  • Relocation of all of the above
  • 4 x different USB cords
  • All the different USB ports on my PC
  • Swearing and the curse (usually works with Microsoft Products only)

  The only thing I have NOT tried, is witch Craft and Country dance.

  Any other suggestions would be very appreciated...

  Update...

  I completely erased from my hard drive and reinstalled XP, SP3/Net fix...

  The printer is installed the first time.

  If everything is working now.

  There was something installed hidden somewhere that the installation process didn't like.

  Thanks for your help with this.

• Problem with HP DeskJet 710C printer print do not.

  I have a new Dell Windows 7 Home Premium Service Pack 1 64-bit and have a HP DeskJet 710C printer.  Windows 7 downloaded the driver, and it is set as the default printer.  When I click on print, the page goes to my impression that and it shows print and then she gives the impression as if it printed, but it didn't.  I know that this printer is an older model, in the properties of the print server, I saw in the name of the file that it is 32.  When I went to 'Maintain my printer', I clicked on aligning the print cartridge and Windows Explorer has stopped working.  I'll be able to use this printer?

  Uninstall of the printer will remove print jobs.

  But you say that they are more in the impression even when stone.

  What you have to do then is to follow the HP infromation, I gave you in my first reply to you:

  "Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for it there also. »

  HP Deskjet 710C printer

  Following the instructions of HP will tell you when to plug the USB cable into the computer.

  See you soon.

• HP DeskJet 500 printer

  Hello. I use a HP DeskJet 500 printer, which is about 14 or 15 years old. My problem is that when I insert a new cartridge, it works very well for a few days and then stops just print. My remedy is so far to remove the cartridge, pull it out and shake it vigorously and then reinstall it. It works for a few minutes to several days. This has happened with the last 3 cartridges, I have installed.

  I don't know if my printer is just tired or if I got hold of a defective batch of cartridges?

  Any thoughts would be appreciated.

  Wow - this printer sounds like it must be an old friend! Is failure, an error message, or printing is faded or ridged?

  Are you sure that you are using genuine HP cartridges? The HP cartridges are guaranteed to work up to the date that is printed on the cartridge. Here's a doc on the warranty of HP ink, which shows you where the dates on the cartridge: http://support.hp.com/us-en/document/c00206040

  If you use genuine HP cartridges and see repeated failures, you should be able to get a replacement under warranty. You shouldn't have gotten 3 defective cartridges in a row.

  The only other thing I can think is that some older printers cartridge problems can be caused by an accumulation of sludge of ink on the service station. I can find no documentation for the Deskjet 500 on hp.com, so I can't tell you even which side of the printer is the gas station, but if you turn off the printer, open it so that you can physically see the cart with the cartridges and then pull the transport until the middle of the printer, the service station must be just below where the transport was. If you see a build up of sludge to ink it, you could try, very carefully, to clean. Be aware that the mud is dried ink and will be very messy - be sure that you don't get on your skin, clothes, carpets, etc..

  Good luck!

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Where can I find the download of the base for a HP Deskjet D4260 printer driver?

  Where can I find the download of the base for a HP deskjet D4260 printer driver? I have a new Windows 8 tablet running, and the only thing I can find is downloadable for the complete software suite.  References from the HP website they have a base driver download but you don't tell where.  Search all of lead them to the download of the complete suite.

  Hello eworth3,

  I followed on the specific page for this driver and found the same thing - my apologies that there is not a link on this page for basic training.  I did a search on the site hp.com for this text and it took me to a page that has the base driver... I have included the link below.  This is the basic feature software solution and is a driver software intended only to users who want a basic print and driver scanning for use with their device from HP all-in-one.

  Thank you for that bring to our attention: I would ask to add the link to the specific page.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109012-2 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0001

• HP Deskjet D4360 printer

  Help!  HP Deskjet D4360 printer is practically new out of the box - probably printed a dozen copies to date.  Ink cartridges are genuine HP and also almost brand new.  The printer has been used for a few months, which has never been a problem w / my previous 4360.

  Initially "printing" white pages; re-installed the software and provided a sample page in various shades of blue, with the "20" in the almost invisible centre.

  I cleaned and re - clean cartridges (basic and intermediate); aligned and re-aligned; calibrated and calibrated; primed and re-primed - to no avail.  With printing alignment, I'm not able to determine any # s in order to answer the questions about the visible lines least.

  Undertook to research further and was guided on how to print a 'diagnostic' page - the printer chatters and click on that it will do something, but nothing.  The instructions give no indication of how long to press the power & Cancel buttons, so from different eras have been tried.

  Also turned the printer off and restarted it about half an hour later--had no effect.

  I need to use this printer today - any of you experts can help me?

  Have you tried to install new cartridges?