HP Deskjet 5150 driver Windows 7

I have the HP Deskjet 5150 printer. I did a fresh install of Windows 7 32 bit and I noticed that even if I didn't install the driver included with the CD for the printer (which I doubt would work on Windows 7 in any case), it seems that Windows 7 is already installed a driver for me. However, it feels extremely slowly for the pages of color/gray scale, it takes about 5 + minutes to print a single page. If it is a black and white text document, then it is fine.

Is there any solution for this? Does anyone else have this problem? HP will produce a Windows 7 driver?

The symptom you describe can be caused by a failed color cartridge.  Try to remove the color cartridge and printing of the page.  The printer automatically goes offline backup to print.  If it prints at a normal speed (in grayscale... of course) your color cartridge is the question.  Clean the contacts as shown here can solve the problem, if not you will need to replace the cartridge.

It's one that comes with Windows 7 provided by HP HP did produce a Windows 7 driver.  According to this page there are no drivers provided through HP.COM.

Tags: HP Printers

Similar Questions

  • DeskJet 5150 driver for Windows 7 (64-bit)

    How can I get a Deskjet 5150 driver for Windows 7 (64 bit)? I have recently added a new laptop with Windows 7 on a small home network (using working groups) and want to be able to use the existing printer 5150.

    Thank you

    Stephen

    You can add the printer as follows: go to the folder, devices and printers, adding a printer, add a local printer, create a new Port, the Local Port, the \\XPcomputername\DJ5150sharename (use the sharing of correct XP computer and Deskjet 5150 share names), then Windows Update, and then select the HP Deskjet 5150.

  • HP Deskjet 9300: HP Deskjet 9300 driver Windows 7 64 bit

    I have an old HP Deskjet 9300 and it does not work with Windows 7-64 bit using the USB cable.

    I tried alternate drivers 1220C HP Deskjet 6980, but both does not work either...

    I solved this problem...

    Follow the steps in the link

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01796821 & DocLang = in & docLocale = en_US & JumpID = reg_r1002_usen_c-001_title_r0021

    but do not forget steps 3 and 4...

    It's easy...

  • HP deskjet 6940 driver windows 7

    I have a job perfectly HP DeskJet 6940 but my SSD has failed and I need to reinstall the drivers for win 7 64 bit.  A year ago, they were still in line with instructions for installation.  Now the only driver is for a USB printer.  I don't remember how I connected the printer about a year ago.  Driver win 7 will work?  I have just to connect the ehternet cable and pray?

    Kind regards

    Ellen

    Hi Ellen

    First connect the printer to your network using an Ethernet cable.

    Then, enter devices and printers and click the Add Printer button.

    Select network connected printer and follow the steps in selecting the printer listed. the drivers are already included in the operating system and should install automatically once the Wizard completed.

    Kind regards

    Shlomi

  • HP deskjet 5150 - failure sudden print under Windows 7

    I've been running a printer HP Deskjet 5150 with Windows 7 for two years now without a problem (and for several years before in XP). Suddenly, it ceased to print from my desktop computer but continues to work away happily from my laptop (which is still running on XP).  When I select a file to print from office model, the printer comes to life (lights flashing etc.) but nothing is displayed. On the Control Panel, it says that it is there no ducuments in the queue.  I reloaded the driver etc. and used installation HP doctor, but all without result: none can detect defects.  But in trying different routes of troubleshooting, I find that the "Print test Page" function works as long as necessary the office, then it seems that nothing wrong with the printer functionally.   (But "print test page" in the installation of doctor HP is not working!)

    I saw only two error messages: once I got an error message that read something like "this program has encountered an error and is unable to act" and a second, some time later, said "cannot print scripts on this page.  They lead me to suspect that the problem lies somewhere with the Windows software.  The firewall in use is BitDefender, but disable this does not solve the problem.  Can anyone help?

    Sand Piper, to start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

     
  • HP deskjet 3900 driver for OS windows 7

    I just purchased a computer with an operating system of windows 7 and have a hp deskjet 3900 printer, can I get this printer to work with windows system 7?

    Hello diyasher_21,

    There is no Windows 7 driver available for download for your Deskjet 3920 series.  This document provides information on how to install a print driver Windows 7 OS.

    Please let me know if it helps.

    Good luck!

  • Driver printer Deskjet 648C for Windows 8

    Just need to know where I can get the driver for my Deskjet 648C for my newly purchased Windows 8 fantastic.

    The printer is not an all-in-one.  Thanks in advance...

    Greetings! Welcome to the forums, ggrin!

    I understand that you are looking for drivers for your Deskjet 648c on your system Windows 8.

    I looked into the available drivers and unfortunately there is not a function driver full downloadable for the printer Deskjet 648c on Windows 8.

    Your only option is to install a driver for 8 Windows with Windows Update

    I hope that helps clarify and answer your question!

    Have a fantastic day

  • HP deskjet 6122 s: print driver for hp deskjet 6122 s windows 8.1

    Hello

    I have a netbook gateway LT 41 P07 with a 8.1 - 32 bit operating sistem and I can´t get install my printer hp deskjet 6122 s.

    can you help me figure out a compatibility reader feel sistem for her

    You restart the computer after the add a printer process?

    As I said there is no direct drivers for your printer on Windows 8.1.

    To assign a different print driver in Windows 8:

    1. Hold your mouse arrow in the bottom right or at the top right, the screen to appear charms bar.  If you use a touch screen, you can swipe your finger from right to left.
    2. Choose the charm of the research.
    3. In the search box, click settings.
    4. In the search box, type devices.
    5. Click devices and printers.
    6. Right click on your printer.
    7. Select the properties of the printer.
    8. Click the Advanced tab.
    9. Click new driver.
    10. Click Next.
    11. Select HP in the first list.
    12. Select class driver of HP Deskjet PCL3 in the second list.  You can also use the Photosmart PCL3 Driver class, PCL3 Officejet class driver, Deskjet 990c or Deskjet 450 driver.
    13. Click Next.
    14. Click Finish.
    15. Click on apply to save the changes.
    16. Click OK to close the window.

    If it doesn't work on everything that you can do is download the installer of Windows 7 32 bit driver of the site then right click on the downloaded file and the compatibility mode.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=83027#n197

  • Driver for HP deskjet 1180c on Windows 7 64 bit

    Hello, I searched high and low for a way to get my HP printer deskjet 1180c running on my computer that I have Windows 7 64 - bit race. When I look at "Support and driver, I see that HP has released no driver for Windows 7 and I don't understand why." The printer is not old. It's very frustrating.

    If anyone knows of some drivers out there, or if there is a work around, I can try I would greatly appreciate your suggestions because that what it is this printer is useless for me.

    Thank you very much.

    Jon

    I suspect that the drivers Deskjet 1220C would work for the similar 1180c Deskjet.  Install the driver with "Add a printer", select the appropriate port and when the list appears, click Windows Update to refresh the list of available printers.  Select printer HP Deskjet 1220C in the list. (The picture shows 1120c, which would be the second choice if the Deskjet 1120c driver does not work.)

  • Can someone suggest a print to deskjet hp1280 driver to work with windows 7 (64 bit)?

    Can someone suggest a print to deskjet hp1280 driver to work with windows 7 (64 bit)?

    Hello:

    Please see if Vista x 64 driver works.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=439162&prodNameId=439174&swEnvOID=2102&swLang=8&mode=2&taskId=135&swItem=dj-52448-1

    If this isn't the case, it's probably time for a new printer.

    Paul

  • I need a driver for my Deskjet 1220C on Windows 7 64 bit

    I need a driver for my Deskjet 1220C on Windows 7 64 bit

    Install the driver with Windows update with usb to printer connection.

    There is no downloadable driver available on the portal to suport HP for your printer. Available only for Windows 7 x 64 driver is provided by Microsoft.

  • Can't get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.

    Original title: driver HP DeskJet 5440 windows 7 32 bit

    I was unable to get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.  I also was unbale to find your compatibility Center.  Is there a link were I can down-load the driver directly from.

    Tony,

    In fact, I assumed that yours was always supported by HP * but I understand now that it's not [so I guess that it is more than 10 years because it is their general support period].  {* Mine is a DJ 2540 and is only a few years so I thought a 5440 DJ must be more recent}

    I see that HP gives you general instructions on installing drivers in http://support.hp.com/gb-en/product/hp-deskjet-5440-printer-series/445466/model/445467/document/c01796879/ I checked Microsoft update catalog service and nothing found for HP Deskjet 5440, that's why you're not having any success with the generic instructions, giving you these instructions seem to presuppose the existence of a Windows driver for this specific model.  {HP must have given up your specific model before that this catalogue has been compiled, because hardware manufacturers are those that connect to their drivers inside}

    However, my suggestions may solve your problem or maybe not.  They are simply the steps that seem more likely to be successful.  Personally, I'd a system image before you try each of these suggestions so that you can go back to square one if something goes terribly wrong.

    Suggestion 1 - go to the devices & Printers dialog box, click Add a printer, select HP then select HP Deskjet 5400 series [the sequence in the list is awkward, this entry is about 10% of the way to the bottom of the list], click on Next and follow the procedure of menus at its conclusion.  Even if it's completely successful, plan to run my Suggestion 4 below as well in case of future need.

    Suggestion 2 - out whatever the driver that shipped with your printer in the first place, try to install in compatibility mode [right click on its executable, click on the tab compatibility , the value of the check box for run this program in compatibility mode for... and select a BONE the printer worked correctly with.]  Then go to the executable, right-click and select run as administrator.  This idea is not frivolous, until he blew something internally, I was using my 1999/2000 HP Deskjet 1220C successfully on Windows 7 x 64 for four years [despite the HP user forums which implies that this was not possible].

    Suggestion 3 - go back to the HP site to http://support.hp.com/gb-en/drivers/selfservice/hp-deskjet-5440-printer-series/445466/model/445467 but select 10 Windows as your operating system.  In the results, the Diagnostics Utility Tools point contains now a setup generic [hppiw.exe] who described "HP for Windows printer setup wizard was created to help users Windows 10 download and install the software solution most appropriate for their printer and newer HP HP Windows 7 and Windows 8/8.1.   Simply run the tool and follow the on-screen instructions. " Download & run [run as Admin] of this file.

    Suggestion 4 - Connect to an Admin-level account first, then, using IE [there than IE], date back to the Microsoft update service catalog and search for HP Deskjet 5400 series.  It will give a lot of results, then click on the driver name in the left column of title to see details for each potential choice [especially if it is 32 or 64 bit].  The top of the list is [32-bit] Microsoft Update for HP Deskjet 5400 Series driver dated June 21, 2006.  [You might also download & file the second element, the 64-bit version, just in case you change computers in the future]  Add the chosen driver [s] to the "trash" then download - you will be asked to select a file to download first {it is at this stage that the process would be a break without further explanation or any error if you had not been connected to an Admin-level account before launching IE}.  I think that these drivers also work with Windows 10 thus, in the hope that your printer works for the years to come, it would be well worth your copies of maintenance of them filed there ready for your next computer use.

    Proposal 5 - go [back] to the forums of user HP Deskjets & find 5440.  See if any of the other suggestions can help you - unless you have already looked through them all the more relevant [I realize that you have been here once already as one of the threads that I just watched was of you].

    We know, in advance, which of these suggestions will lead to the best possible solution.  So please come back to this forum to explain what happened when you tried the.  Your experiences will benefit all users of HP Deskjet 5440 who come here looking for advice.

    Good luck

  • HP deskjet 990cxi driver to use under Windows 7 32 bit. Can you help me?

    I have a laptop using Win 7 32 bit Enterprise.

    I have a HP deskjet 990cxi printer and cannot find a driver.

    The HP site says it is included in the update of Windows, but on the other side it says that there is more

    For windows 7 32-bit:
    Open the file devices and printers via the Start Menu
    * Select Add a printer
    * Select Add a local printer
    * Select the USB port on the printer connected to it in the list of existing ports
    * Click next and this should get you to the driver selection screen
    * At the bottom of the driver selection screen, select Windows Update (this can take a few minutes)
    * After the Windows Update, browse the manufacturer list until you find HP
    * Scroll the list until you find the HP Deskjet 990c driver
    * Click next
    Printer name and click Next

    Let me know if it helps.

  • Impossible to print on the printer hp deskjet 3420 for windows 7 driver

    I have an HP deskjet 3420 printer I am trying to set up as a local printer to my PC. HP site doesn't have any driver for this printer and says to use deskjet 3600. When I look at my available printer drivers I can't find a 3600 printer driver. Also, went into windows update as the support instructions say and update could not find a driver. Tried to download a driver windows 7 for a deskjet 3600 and it say instructions to use windows update, which had not worked for me. I tried several other print drivers and have no luck with one of those I chose. any help appreciated

    thought about it not need to go far thanks

  • Head alignment on Windows 7 for my HP Deskjet 5150

    I tried the web and this forum so well there is no solution to this dilemma. I can't print with my HP Deskjet 5150 now because the heads are misaligned and I changed the cartridges recently twice. Replace the cartridge is therefore not an option. I have some other work arrounds to put my printer to another PC that has windows XP and align the heads here but it's just TOO as much as always, I have this facility.

    THEN

    Now I need help from people who have experience and knowledge, please can you guys and girls to help out me in this? I would like assistance or guidance.

    Thanking all in advance

    Hi ANM

    If you press and hold the power button then press the button 3 times and release the power button will print a calibration page. I hope this will solve your problem. If you need clean the cartridges, you can do a similar operation: press and hold the power button, press the button cancel, press the button 1 time 2 times and then release the power button.

Maybe you are looking for

  • Bookmarks sidebar displays when Cntl-I, Ctrl-U or Cntl-M is entered

    Just upgraded to Firefox 10. When I type and enter the command-I to activate on italics in Blogger or Google, I get to the place the bookmarks bar. Doesn't remember having seen this reaction prior to upgrade. Is there a way to delete this connection?

  • NB200 - battery indicator shows the life of the battery in percentage

    HelloSomeone had this problem? My (Windows and also the PM from Toshiba) battery indicator does not show remaining battey in minute but life only in percentage.is this correct or there are some strage parameters in power setting menu? Thank you

  • Envy 13 d001ne: cannot install Windows 10 from usb flash drive

    Summary of the problem: The laptop SSD has a GPT format. I am trying to insall a Windows 10 ISO I have on it from a flash drive. Formatting a usb startup as TPG manually or using Rufus drive will not make the unit visible non-traditional mode. Format

  • Satellite A500-15N: FN keys do not work

    Hello I hope someone can help,The function key does not work in windows (I mean here the keys Fn + F6/7 change the brightness during the windows loading screen). There also seem to be buttons along the top of the keyboard (commodity the power button)

  • Diagnostic PC Toshiba tool shows not all components in the Diagnostic tool

    Hello I recently had some problems with my Satellite A200 laptop computer screen freezes, do not restart correctly after hibernation and battery warnings displayed even if it is still plugged into the mains to low. When I get battery it will eventual