HP deskjet 6840 undetected on the wireless network after you have added the new wireless router.

Similar Questions

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• Cannot start Bootcamp, after you have added the partition using disk utility

  My question is similar with repair Boot Camp after having created the new partition.

  recently I install the el capitan + windows 7 (using bootcamp), everything works fine after I add the third partition. (I anticipate the third partition will be use for dropbox, for mac and windows can sync-ing a dropbox for each folder).

  After I've done the third partition and restart the system, I want OPTION and found no windows.

  My mbp spec:

  MD101 2012 13 ",

  SAMSUNG 850 PRO SSD 256GO,.

  16 GB RAM,

  elcapitan OS x + windows 7 ultimate.

  Thank you

  Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After you have added the R1211 node. Pointing to the 2nd node Web entry

  Hi, Experts,

  I add new application node (12.1.1) in according to metalink doc. The cloning procedure went well. The problem I get is after you add the new node. Web writing is oriented to the second node.

  Cloning of Oracle version 12 with rapid Clone Applications (Doc ID 406982.1).

  
  

  My setup is as below.

  
  

  1 - Appsn1 (services of all running applications)

  2 - Appsn2 (services of all running applications)

  3 - OraN1 (data services)
  

  
  

  Please let me know if I'm missing something.

  
  

  Kind regards

  
  

  USAF
  

  Please, try the following:

  -Stop the application services on both nodes

  -Start AutoConfig on the node that you just added and make sure that it ends successfully

  -Start AutoConfig on the head node and make sure that it ends successfully

  -Start the application services on both nodes

  -Then check

  Several Application nodes configured without load balancer Cause Login Redirection (Doc ID 1362885.1)

  Thank you

  Hussein

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• Integrated WebLogic fails to start after you have added the security provider

  Hello

  I'm new in the adf and weblogic. I use weblogic built-in jdev 12 c 12.1.2.

  I set up the security in my weblogic using this blog.

  http://adfgouravtkiet.blogspot.com/2012/07/Configuring-ADF-security-using-database.html

  It is configured successfully. But after you configure when I restart my weblogic server, it will fail to start. This is stack strace.

  < 16 April 2014 17:46:33 hours CEST > < error > < security > < BEA-090870 > < the domain 'myrealm' could not be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException.

  weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException

  at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:341)

  at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1812)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:447)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:845)

  Truncated. check the log file full stacktrace

  Caused by: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException

  at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)

  at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)

  at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)

  at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)

  at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:46)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.NullPointerException

  at weblogic.security.providers.authentication.shared.DBMSUtils.verifyHashAlgorithmUsable(DBMSUtils.java:43)

  at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.validateConfiguration(DBMSSQLAuthenticatorDelegateImpl.java:167)

  to weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl. < init > (DBMSSQLAuthenticatorDelegateImpl.java:77)

  at weblogic.security.providers.authentication.DBMSAuthenticatorDelegateImpl.getInstance(DBMSAuthenticatorDelegateImpl.java:459)

  at weblogic.security.providers.authentication.DBMSSQLAuthenticationProviderImpl.initialize(DBMSSQLAuthenticationProviderImpl.java:55)

  Truncated. check the log file full stacktrace

  >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 16 April 2014 17:46:33 hours CEST > < critical > < WebLogicServer > < BEA-000362 > < server failed. Reason:

  There are 1 nested errors:

  weblogic.security.service.SecurityServiceRuntimeException: security services [Security: 090399] not available

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:921)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1058)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:148)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < WebLogicServer > < BEA-000365 > < Server state changed to FAILED. >

  < 16 April 2014 17:46:33 hours CEST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server shuts itself down. >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < WebLogicServer > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >

  Stopping Server Derby...

  Derby server stopped.

  Process is complete.

  [End of IntegratedWebLogicServer.]

  SQL authentication is configured using a data source. If I change the name of blind in weblogic in the config.xml file data source, he throws exception but able to start the server. can any body help to what he's trying to find the data source before inilizing it. Here is my file config.xml

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < domain xmlns =" http://xmlns. Oracle.com/WebLogic/Domain "xmlns:sec =" http://xmlns. " Oracle.com/WebLogic/Security "xmlns:wls =" http://xmlns. " Oracle.com/WebLogic/Security/WLS "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " xsi: schemaLocation = " http://xmlns." Oracle.com/WebLogic/Security/XACML http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/oracleas/schema/11/jps/weblogic/providers http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic / security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd' > .

  < name > DefaultDomain < / name >

  field < version > 12.1.2.0.0 < / domain-version >

  > security configuration <

  < name > DefaultDomain < / name >

  < domain >

  < sec: authentication - provider xsi: type = "wls:sql - authenticatorType" >

  db_user < sec: name > < / sec: name >

  < sec: control - flag > SUFFICIENT < / sec: control - flag >

  < wls: data-source-name >workdayDS< / wls: data-source-name >

  < wls:plaintext - passwords-activated > true < / wls:plaintext - passwords-enabled >

  < wls:sql - get-users-Word of past > SELECT PASSWORD FROM WORKDAY_USERS WHERE username =? < / wls:sql - get-users-Word of past >

  < wls:sql - user - exists > SELECT name from USER OF WORKDAY_USERS WHERE username =? < / wls:sql - user - exists >

  < wls:sql - list-members-groups > short_name SELECT OF WORKDAY_user_role_grants g, workday_roles r, workday_users u WHERE g.usr_id = AND g.rle_id = r.id AND u.username u.id =? < / wls:sql - list-members-groups >

  < wls:sql - list-users > SELECT USER FROM WORKDAY_USERS WHERE name LIKE USER name? < / wls:sql - list-users >

  < wls:sql - get-user-description > SELECT DISPLAY_NAME FROM WORKDAY_USERS WHERE username =? < / wls:sql - get-user-description >

  < wls:sql - list-groups > SELECT SHORT_NAME FROM WORKDAY_ROLES WHERE SHORT_NAME AS? < / wls:sql - list-groups >

  < wls:sql - group - exists > SELECT SHORT_NAME WORKDAY_ROLES WHERE SHORT_NAME =? < / wls:sql - group - exists >

  < wls:sql - East-members > SELECT u.username OF WORKDAY_user_role_grants g, WORKDAY_users u WHERE u.id = g.usr_id AND rle_id = (SELECT id FROM WORKDAY_roles WHERE short_name =?) AND usr_id = (SELECT id FROM WORKDAY_users WHERE username =?) < / wls:sql - is-member >

  < wls:sql - get-group-description > SELECT name FROM workday_roles WHERE the short_name =? < / wls:sql - get-group-description >

  < wls:password - algorithm > < / wls:password - algorithm >

  < wls:password - style > PLAINTEXT < / wls:password - style >

  < wls:sql - create-user > INSERT INTO WORKDAY_USERS (USERNAME, PASSWORD, DISPLAY_NAME) VALUES (?,?,?) < / wls:sql - create-user >

  < wls:sql - user-delete > DELETE FROM WORKDAY_USERS WHERE username =? < / wls:sql - remove-user >

  < wls:sql - remove group memberships > DELETE FROM WORKDAY_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) OR usr_id = (SELECT id FROM workday_users WHERE username =?) < / wls:sql - remove group memberships >

  < wls:sql - set-user-description > UPDATE WORKDAY_USERS SET DISPLAY_NAME =? WHERE USERNAME =? < / wls:sql - set-user-description >

  < wls:sql - set-user-word of past > UPDATE WORKDAY_USERS SET PASSWORD =? WHERE USERNAME =? < / wls:sql - set-user-word of past >

  < wls:sql - create group > VALUES INSERT INTO WORKDAY_ROLES (id, short_name, name) (ROLES_SEQ. NEXTVAL,?,?) < / wls:sql - create group >

  < wls:sql - set-group-description > UPDATE workday_roles SET name =? WHERE short_name =? < / wls:sql - set-group-description >

  < wls:sql - Add-Member-to-group > INSERT INTO workday_user_role_grants (id, rle_id, usr_id) VALUES (workday_user_role_grants_seq. NEXTVAL, (SELECT id FROM workday_roles WHERE short_name =?), (SELECT id FROM workday_users WHERE username =?)) < / wls:sql - Add-Member-to-group >

  < wls:sql - remove-member-of-group > DELETE FROM workday_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) AND usr_id = (SELECT id FROM workday_users WHERE username =?) < / wls:sql - remove-member-of-group >

  < wls:sql - group-delete > DELETE FROM WORKDAY_ROLES WHERE short_name =? < / wls:sql - remove group >

  < wls:sql - delete-Group-members > DELETE FROM workday_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) < / wls:sql - remove group member >

  < wls:sql - list-group-members > SELECT username FROM workday_user_role_grants g, workday_roles r, u workday_users WHERE g.usr_id = AND g.rle_id = r.id AND r.short_name u.id =? AND u.username AS? < / wls:sql - list-group-members >

  < / sec: authentication - provider >

  < sec: authentication - provider xsi: type = "wls:default - authenticatorType" >

  < sec: name > DefaultAuthenticator < / sec: name >

  < / sec: authentication - provider >

  " < sec: authentication - provider xmlns:prov = ' http://xmlns.Oracle.com/OracleAS/schema/11/JPs/WebLogic/providers "xsi: type ="prov:trust - service-identity-asserterType"> ".

  Trust Service identity Asserter < sec: name > < / sec: name >

  < / sec: authentication - provider >

  < sec: authentication - provider xsi: type = "wls:default - identity-asserterType" >

  < sec: name > DefaultIdentityAsserter < / sec: name >

  < dry: active-type > AuthenticatedUser < / dry: active-type >

  < / sec: authentication - provider >

  " < sec: role - Mapper = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - role-mapperType "> ".

  < sec: name > XACMLRoleMapper < / sec: name >

  < / sec: role - Mapper >

  " < sec: authorizer = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - authorizerType "> ".

  < sec: name > XACMLAuthorizer < / sec: name >

  < / sec: authorizer >

  < sec: adjudicator xsi: type = "wls:default - adjudicatorType" >

  < sec: name > DefaultAdjudicator < / sec: name >

  < / sec: adjudicator >

  < sec: credential - Mapper xsi: type = "wls:default - credential-mapperType" >

  < sec: name > DefaultCredentialMapper < / sec: name >

  < / sec: credential - Mapper >

  < sec: cert - path-provider xsi: type = "wls:web - logic-cert-path-providerType" >

  < sec: name > WebLogicCertPathProvider < / sec: name >

  < / sec: cert - path-supplier >

  < sec: cert - road-builder > WebLogicCertPathProvider < / sec: cert - road-builder >

  < sec: name > myrealm < / sec: name >

  " < sec: password - validator = xmlns:pas ' http://xmlns.Oracle.com/WebLogic/security/providers/passwordValidator "xsi: type =" not: System-Password - validatorType "> ".

  < sec: name > SystemPasswordValidator < / sec: name >

  < not: min - password - > 8 length < / not: min - password - length >

  < not: min-digital - or - special-characters > 1 < / not: min-digital - or - special characters >

  < / sec: password - validator >

  < / domain >

  < domain >

  < sec: authentication - provider xsi: type = "wls:sql - authenticatorType" >

  db_user < sec: name > < / sec: name >

  < sec: control - flag > OPTIONAL < / sec: control - flag >

  < / sec: authentication - provider >

  < s: deploy-credential-mapping-ignored > true < / sec: deploy-credential-mapping-ignored >

  RDBMS < sec: name > < / sec: name >

  < / domain >

  field < default > myrealm < / default domain >

  < credentials encrypted > {ESA} oiXGiKafJRTHRLy3teTxciHGGJde23frXWjmnQAK2qQIuRYhySgd6oh/ZsnHQK1u99KboPN4Tjo5uS6tg37hufUPCJIdgDAhAOjBEZHVTXFc4YwQmZ6jdCpqlqEjUOkK < / encrypted credential >

  WebLogic < node-Manager-user name > < / node-Manager-user name >

  {ESA} < node-Manager-password - encrypted > dPzCkXm4Z8SaMVCroCwFXEIvbz/FTMroi8W/aDM7blA = < / node-Manager-password encrypted >

  < use-kss-for-demo > true < / use-kss-for-demo >

  < / security configuration >

  < Server >

  < name > DefaultServer < / name >

  < ssl >

  < name > DefaultServer < / name >

  < enabled > true < / enabled >

  < Listening port >

  8102

  < / Listen-port >

  < two - way ssl compatible > true < / two - way compatible ssl >

  < / ssl >

  < Listening port >

  8101

  < / Listen-port >

  > web server <

  < name > DefaultServer < / name >

  < log-server-web >

  < name > DefaultServer < / name >

  < elf fields > date time cs-method ctx-ctx - sc-status cs - uri DIN ecid < / elf fields >

  <-log file format > extended < / format of log file-->

  < / Web-server log >

  < / web server >

  BRP1LAP16 < listen-address > < / listen-address >

  < tunneling-enabled > true < / tunnel-enabled >

  <-diagnosis-server configuration >

  < name > DefaultServer < / name >

  < diagnosis-context-activated > true < / diagnosis-context-enabled >

  < / config-diagnosis-server >

  defaultCoherenceCluster < consistency cluster-system-resource > < / coherence-cluster-system-resources >

  < / Server >

  < incorporated-ldap >

  < name > DefaultDomain < / name >

  < credentials encrypted > {ESA} WRTXOv5WcAtcIZFA7g9azU4v/ogflkbFEN1TAdhhGbU6R7RiiSfLaouE6fgnkjRg < / encrypted credential >

  < / embedded-ldap >

  configuration < version > 12.1.2.0.0 < / configuration-version >

  < app deployment >

  State-management-provider-memory-rar < name > < / name >

  DefaultServer < target > < / target >

  RAR < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/com.Oracle.State-management.State-management-provider-memory-RAR-impl_12.1.2.rar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  DMS Application #11.1.1.1.0 < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.dms_12.1.2/DMS.war < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > wsil-wls #12.1.2.0.0 < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/com.Oracle.WebServices.FMW.WSIL-WLS-impl_12.1.2.ear < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > coherence-transaction-rar < / name >

  DefaultServer < target > < / target >

  RAR < module-type > < / module-type >

  < source path - > C:/Oracle12c/Middleware/Oracle_Home/oracle_common /... /Coherence/lib/Coherence-transaction.rar < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > wsm - h < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.WSM.pm_12.1.2/WSM-pm.ear < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < Library >

  [email protected] oracle.sdp.client # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.SDP.client_12.1.2/sdpclient.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.pwdgen # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.pwdgen_12.1.2/pwdgen.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] owasp.esapi # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.owasp_12.1.2/OWASP-esapi.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.wsm.seedpolicies # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.WSM.common_12.1.2/WSM-seed-policies.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] odl.clickhistory # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.odl_12.1.2/clickhistory.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] odl.clickhistory.webapp # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.odl_12.1.2/clickhistory.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > oracle.jrf.system.filter < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jrf_12.1.2/system-filters.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.jsp.next # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jsp_12.1.2/ojsp.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > oracle.dconfig - infra #[email protected] < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.dConfig-infra_12.1.2.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > orai18n-adf #[email protected] < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.nlsgdk_12.1.2/orai18n-ADF.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.dconfigbeans # < name > < / name >

  DefaultServer < target > < / target >

  jar of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.dconfigbeans_12.1.2.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.domain # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.model_12.1.2/ADF.Oracle.domain.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.businesseditor # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.businesseditor_12.1.2/ADF.businesseditor.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.management # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.management_12.1.2/ADF-management.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.domain.webapp # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.view_12.1.2/ADF.Oracle.domain.webapp.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > jsf #[email protected]< / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jsf_2.1/JSF-RI-21.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > jstl #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:\Oracle12c\Middleware\Oracle_Home\wlserver/common/deployable-libraries/JSTL-1.2.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > UIX #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.uix_12.1.2/uix11.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > ohw - FRC #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.help_5.0/OHW-RCF.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > ohw - uix #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.help_5.0/OHW-UIX.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.desktopintegration.model # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.desktopintegration.model_12.1.2/Oracle.ADF.desktopintegration.model.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.desktopintegration # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.desktopintegration_12.1.2/Oracle.ADF.desktopintegration.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.jbips # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-jbips-SLIB-stub.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.composer # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-composer-SLIB-stub.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.model.slib # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-Model-SLIB.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.view.slib # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-view-SLIB.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.webcenter.slib # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-WebCenter-SLIB.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  <>shutdown-class

  < name > DMSShutdown < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.dms.wls.DMSShutdown < / class name >

  < / stop-class >

  <>start-class

  < name > class start JPS < / name >

  DefaultServer < target > < / target >

  < deployment > 115 order < / order of deployment >

  > class name < oracle.security.jps.wls.JpsWlsStartupClass < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > JPS start after Activation class < / name >

  DefaultServer < target > < / target >

  < deployment-order > 160 < / order of deployment >

  > class name < oracle.security.jps.wls.JpsWlsPostServiceActivationStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > false < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start WSM < / name >

  DefaultServer < target > < / target >

  > class name < oracle.wsm.config.WSMServerStartupShutdownProvider < / class name >

  < / start class >

  <>start-class

  < name > class start JRF < / name >

  DefaultServer < target > < / target >

  < deployment > 110 order < / order of deployment >

  > class name < oracle.jrf.wls.JRFStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > ODL-start < / name >

  DefaultServer < target > < / target >

  < deployment > 145 order < / order of deployment >

  > class name < oracle.core.ojdl.weblogic.ODLConfiguration < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > DMS-start < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.dms.wls.DMSStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start context AWT Application < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.jrf.AppContextStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start of Web Services < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.j2ee.ws.server.WebServiceServerStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  store < file >

  < name > mds-GOSA < / name >

  < Directory > store/gmds < / book >

  DefaultServer < target > < / target >

  < / file-store >

  < name-server-admin > DefaultServer < / name of the server-admin->

  < wldf-system-resources >

  Module FMWDFW < name > < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > diagnostics/Module-FMWDFW - 2818.xml < / file-descriptor-name >

  incident creates FMWDFW < description > from non-controlled Exceptions and critical errors < / description >

  < / wldf-system-resources >

  < jdbc-system-resources >

  < name > LocalSvcTblDataSource < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/LocalSvcTblDataSource - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-data-source < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-datasource - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-audit-viewDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-auditview - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-audit-DBDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-audit - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > mds-GOSA < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/mds-GOSA - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > workdayDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/workdayDS-6554 - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < consistency cluster-system-resource >

  < name > defaultCoherenceCluster < / name >

  < name-file-descriptor > coherence/defaultCoherenceCluster - coherence.xml < / file-descriptor-name >

  < / coherence-cluster-system-resources >

  < / domain >

  Data source that I use it is wordayDS.

  I have deleted my domain name and create new ones yet to configure SQL authentication, and it works fine.

• error on the console after you have added the second vSwitch.

  Hello

  the message on the console appears after:

  I added second virtual switch with vmkernel and service and storage console by declaring open to esx.

  What has happened and what needs to be done to solve this problem?

  The interesting part that it keeps me not to access esx http://192.168.1.2 even on console, it displays 0.0.0.0 (this machine)?

  Note: this is a laboratory configuration.

  Hello

  Yes, in WS and Yes, I would add to the team. I have in my team 2 ESX, OF Smoothwall Firewall and W2K3 servers for vCenter.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• How do I create a branch to the form after you have created a new record

  Hello
  
  I created a master/daetail form with detail on the same page.
  It works very well.
  When you create a new record, on the details of the page, you enter the data, and you click Ok.
  Then you are directed to the main form, a report containing the lines of recordings.
  You must then click on the link in the column to change the record to add details.
  
  I want to do it is to branch directly on the same page after you create the record. Order to dot Hat I created a branch whith the value equal to CREATE demand.
  And the target is the same page. The problem is to the value of the primary key. This KP is created after sending, and it is not possible to recover because it is created right now. I hope I'm clear.
  
  To sum up the question: how to create a branch immediately to the same page after creating a new record?
  
  I have the page on
  
  [http://apex.oracle.com/pls/otn/f?p=4550 | http://apex.oracle.com/pls/otn/f?p=4550]
  
  The workspace is ESPACE2008
  Is the user name: guest
  the password is: noproblem
  
  The long form is page 42.
  The main form is page 41
  Unfoirtunately tables are not available.
  You can see the process of branch No. 50 on page 42.
  
  Thank you very much for your help.
  
  Christian

  Christian,

  I couldn't connect to your ws because I don't think that your guest user has developer privileges. But have you tried 'Back in the agenda key' property in the region of origin of your page DML process. This should return the value of the primary key newly generated in a page element when the page is loaded.

  Anthony.

  -----------
  http://anthonyrayner.blogspot.com

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• tabs always at the top after you have added Classic theme restaurateur to Firefox 29

  Windows 7. Restorer Classic theme added to Firefox 29. Set tabsontop to false in: config and the legs are always on top. Any suggestions?

  Look in the Restorer Classic theme-> Options/Preferences-> Main-> tabs-> second drop menu select "tabs not on."

• How to force the Photos up-to-date original jpeg file after you have added the GPS data and rotation

  Hello

  Pictures has the ability to add GPS data to an image file, but stores the GPS data in a catalog instead of the actual image file.  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  The only solution I have found so far is to export images updated, remove them from the library of Photos and re - import.  This process, however, replaces the original creation date with the date of the export in the file.  (i.e. a photo taken in 2007 with a creation date of 2007 will now have the date it has been exported photos as a creation date.)

  The reason why I want to update the original file, it is that I use Google Photos automatically create albums using the content of the image, the GPS data and dates.  The backup utility Google downloads the file Master Original therefore excludes files and changes to images in the photos.

  I use the photo Version 1.5 (370.42.0)

  Thank you.

  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  No, Photos will never alter the original image file.

  You can export the photo with the GPS and reimport with file > export and activate "include location information:

  

  Or use a tool to add location data before importing photos to Photos. I use Jetphoto Studio.

• Cannot access planning applications after you have added the calculation Manager

  Hi guys,.
  
  I have recently added/installed the Manager calculation on an environment running (EPMA, HPL, BSE) (11.1.2.1/win 2008r2 64 bit), which had prior to installation of the Calc Manager. EPMA and planning applications in classic and running.
  
  After that, I deployed the calc manager and configured the Web server on the server of the Foundation/epma only, I have 3 servers (Foundation, Manager of epma and calc), Essbase and planning.
  
  I have restrated the services and I can open the calculation Manager.
  
  When I try to open the existing applications of EPMA I get:
  
  [launch the journal]
  [< BEA-101020 > < [path of the module: HyperionPlanning ServletContext@6352948[app:PLANNING: / HyperionPlanning spec-version: 2.5 version: 11.1.2.0]] Servlet failed with Exception
  java.lang.ClassCastException: java.lang.NoClassDefFoundError
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doPost (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at HspValidationFilter.doFilter (unknown Source)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  >
  [End log]
  
  I tried to transfer the applications of EPMA exisitng but it has been abandoned with (HTTP/1.1 500 Internal Server Error)
  
  I checked the ohs_component newspaper and saying some file is missing:
  
  [launch the journal]
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/bpmui/resources/bpm_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/resources/wksp_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/cds_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/tools_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/reporting_analysis/resources/fr/fr_web_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/planning/resources/hp_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/awb/resources/awb/awb_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/aif/resources/aif-global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/calcmgr/resources/calcmgr_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/changeManagement_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/webanalysis/resources/resources_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  ....
  File does not exist: D:/Oracle/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/htdocs/favicon.ico
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet, Resp Code: [500]
  
  [End log]
  
  
  Appreciate any help! and thanks in advance,
  Omar
  
  EDIT:
  I found that all the. JS files that are missing are actually there only without "-U.S.»
  
  Published by: Omar on January 23, 2012 15:17

  Have you tried to redeploy planning again?

  In theory, you should be able to install/configure additional products at a later stage if because they are produced of foundation it may have caused problems.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• HP Deskjet 2542: Cannot print wireless Deskjet 2542 after installing the new modem/router

  We have recently installed a new Netgear modem/router and have not been able to print wireless since installation. I tried everything I could find on the forum and still no luck. Any help will be appreciated.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try each of the channels one at a time.  Make sure they are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.